thedoc
Members
-
Joined
-
Last visited
-
Thank you very much for notifying me! I saw it and updated. Sadly it still doesn't work. On the meantime I have contacted Asrock as this issue occurs on windows too. I have out of options for the moment but I will try through unraid on an r730xd. I shouldn't face any problem there. You've done your part (include the drivers) so I don't think there's much more to be done after this. Don't lock the post yet as I would like to write the conclusion in the next days. Thank you very much for your time and including my silly network card
-
sr-iov Disabled rebar (CAM) enabled above 4g Enabled
-
I don't know if I have to open another thread, but I tried to passthrough the device to a VM and I got the following error On bios, I changed the PCI Gen from auto to Gen5 to no avail (it's placed in Gen5 X16 slot, tried X16 slot running x4 too). I read that drivers are not required in the host device to passthrough a device lspci -vv returns the following about this device
-
Thank you very much for taking such an in-depth look into the matter. I guess I am way over my head but I hope it works on the fly. I took a peak in the post but I will get a better look. Thanks again!
-
I am hoping for the addition of the network card with the following full name Cavium GC-CN7322 CN2360-225SVPN-G Attached the diagnostics tower-diagnostics-20240829-0109.zip
-
Thanks I will, but is there an alternative? I mean there isn't a general interest in these drivers probably. Can I install them on my own some way?
-
its 25Gbit
-
Hello, I don't know if the title is correct but I wouldn't know where my issue is to describe it. I added an Ethernet card that is detected in System Devices (Ethernet controller: Cavium, Inc. CN23XX [LiquidIO II] Intelligent Adapter (rev 03)) But it's not showing in network settings. What am I missing? Added diagnostics Thanks! *edit: running the following command, it became clear that I am missing drivers. I am still not sure how to proceed lspci -nnk | grep -A2 Ethernet tower-diagnostics-20240829-0109.zip
-
I have a windows 11 VM that I have passed through most cores, a GTX 3060 Ti and a nvme drive. Since the beginning I had many issues with the VM or unraid crashing that I temporarily fixed through various posts about similar issues following stuff as long as it made sense. I didn't have crashing issues for many days even with VFIO. I had a sudden crush so I removed anything VFIO related but later that night (while the VM was practically idle) it froze. Today it froze while in use (the sound continued for 30~ seconds) and while writing this post I checked on it and it it froze again (realized from 100% CPU. not all the allocated cores were 100%) The problem is not reproduceable since there is no specific case it happens. It happened while totally idle, while unraid was being used and while the VM was being used (with RDP or physically with passed through mouse/keyboard) I attached the diagnostics and the log since I am not totally sure if it is included in the diagnostics. I hope this nightmare ends. Thank you for your time tower-diagnostics-20231101-2338.zip syslog-192.168.1.46.log
