Zeppi
Members
-
Joined
-
Last visited
-
Nevermind.. I used the device name nvme0n1p1 and all the appdata files are in the temp folder. Gonna install the new drive now. Thanks!!
-
Sorry just got around to trying to fix this now. Ran the memtest and 1x16gb stick of ram was fried. Gonna run with only one stick for now and buy a second later. Trying to follow the instruction you gave regarding recovery of the unmountable drive. I don't follow this line For a single device: replace X with actual device, don't forget the 1 in the end, e.g., /dev/sdf1 What am I replacing the X with in my situation? Sorry if it's obvious. I'm just learning this stuff now .
-
Had a power outage today and now my NVMe cache drive is unmountable. All app data is on this NVMe drive and now can't access docker. Diagnostic below. zeppilab-diagnostics-20240621-2251.zip
-
Looks like HBA was toast. Syncing parity at 230MB/sec now... Tremendous
-
I ran 2 drives without a parity just so I can get some dockers in and run diskspeed or other diagnostic apps. Now I discovered another problem lol. Everytime I reboot the server I get an unsupported drive error on the 2 spinning disks but not my nvme. Gonna try skipping my HBA and plug sata directly into motherboard to see if my HBA is the problem. Can I run unraid strictly off the motherboard or is an HBA a must? I know if I want more drives I'll have to go the HBA route; but just to get me up and running with my 3 disks is motherboard an option?
-
Here's a diagnostic I just pulled. I did hear activity from the HDD's as soon as I powered the system and even before booting into unRaid to try and start the array again. zeppilab-diagnostics-20231118-0806.zip
-
Hello, Just setup my first diy NAS. Going through the drive/parity setup and I'm getting 15-20MB/sec speed. Estimated time of 4 days to sync my parity. I'm new to all this so hoping I can get some community help. See my diagnostic attached. zeppilab-diagnostics-20231118-0126.zip
-
Zeppi joined the community
-
I'm getting the same error. I don't know what you did to fix this. How do I mount/boot into support Enviro and disable the maxcache? So frustrated
