Jump to content

CopesaCola

Members
 View Profile  See their activity

  • Posts

    25

  • Joined

  • Last visited

 Content Type 

Everything posted by CopesaCola

  1. CopesaCola
    This was it for the most part, however there's a known issue with some GPUs that won't allow you to hw transcode if HDR tonemapping is on. After I unchecked that, it was smooth sailing. Thanks again!
  2. CopesaCola
    Dual-Core N4505 Processor
  3. CopesaCola
    I'm pretty sure it's Intel, I'm running a TerraMaster F2-223 if that helps
  4. CopesaCola
    I am having trouble hardware transcoding, I just bought a plex pass and am not sure what I am doing wrong.
  5. CopesaCola
    Update fixed it! Thanks so much
  6. CopesaCola
    I just tried this from above, but now it's 'refused to connect'. I see you're about to fix the update so I'll try again then!
  7. CopesaCola
    Still nothing TerraNAS-tailscale-diag-20240123-224324.zip
  8. CopesaCola
    Will do, I hit restart and it didn't look like anything happened. I'll send back in a few if nothing changes though.
  9. CopesaCola
    Same issue
  10. CopesaCola
    Just set up tailscale on all of my devices, tried to remote into the unraid WebGUI from my iPhone and am getting a 'took too long to respond' error. I attached the diagnostic TerraNAS-tailscale-diag-20240123-222334.zip
  11. CopesaCola
    Hey guys, just getting started with unraid and loving it so far! I've set up my domain, cloudflare, and nginx up properly to use http for all of my dockers (I've also created SSL certificates for each of them from the SSL tab). What I am trying to do now is change them to https, the issue is that whenever I update the "scheme" from http to https, the site gives me a "too many redirects" error. I have a feeling that there is something else I should be doing, but I have no clue where to start. Any help would be appreciated!
  12. CopesaCola
    So it seems that at some point during my troubleshooting I reset the port forwarding rules in my router... after resetting those rules with the right ports everything works perfectly. The WAN address from https://whatismyipaddress.com/ would've been all I needed if I hadn't overlooked that. Thank you for all your help!
  13. CopesaCola
    Set this up and the ip is auto pulled by cloudflare, but in the video space invader's IP for his main domain is different from the IP for his 'dynamic' subdomain whereas both of my IPs are the same The IP from this site is the same that cloudflare DDNS picked up, but the webpage keeps timing out
  14. CopesaCola
    Does 24.221 sound right? I got that to proxy through cloudflare, but the webpage says gives a 522 error (connection timeout)
  15. CopesaCola
    My router ip is 192.168, does this mean I can't use DNS?
  16. CopesaCola
    How would I go about setting up Cloudflare DDNS?
  17. CopesaCola
    Hey guys, let me know if there is a better forum for this. I am trying setup DNS with cloudflare, but it tells me that the ipv4 that I use to access unraid and all other dockers cant be proxied. When I continue without proxy and set everything up with Nginx, the web page says that DNS points to local or disallowed IP. Any ideas?
  18. CopesaCola
    Honestly I was just following a YouTube tutorial for most of the setup, I don’t think I need a custom network if bridge mode will work. Will try when I’m home
  19. CopesaCola
    That is the docker0 assignment. Do you mean changing the host IP in radarr/sonarr to 172? If so that also does not work. I have the Network Type in the docker settings set to custom: br0 if that matters
  20. CopesaCola
    No dice
  21. CopesaCola
    Adding this as the host ip for qBit in radarr didn't work, did you mean to put it elsewhere?
  22. CopesaCola
    Hey guys, just starting with unraid and have everything set up with binhex (plex, radarr, sonarr, qbittorrentvpn). I got through the qBit password issue just fine but I can't get radarr and sonarr to connect to qBit, am I doing anything wrong on my end? Thanks in advance!
×
×
  • Create New...