808mp5

Issue with latest version 2025.12.24 after update Issue - After update User Script page is blank with only default options, script list and custom folders missing Cause - missing user.scripts.enhanced.cfg in config/plugins/user.scripts.enhanced Solution - Go to Settings -> User Scripts Enhanced and update and apply to restore missing file, everything should be as it was as the config.json file is retained in the plugin folder after update

glad i found this thread nearly 5yrs later... was having intermittent drops on my LSI9305-24i super simple to follow and not as stressful as i was expecting... now let's hope this fixes my issues with HDD randomly dropping out

Upgraded BIOS to latest.. still no fix Not that i need any video out or anything.. but still a problem

I have this issue: - Use of BMC VGA/KVM (with full output until Unraid boot option ex. w/gui, safe mode, etc) AND a detected iGPU in Unraid (with or without dummy plug) All three of my GPUs passthru just fine. but i lose all video output via IPMI/BMC and dGPU Once Unraid boots and the boot selection screen is done counting down... I get about 2 lines of output and kapoot. Other than no video output regardless of what gpu or the bmc vga connector... all is well It's an Unraid thing... tried bootable Windows 11 USB and all my dGPUs have video output W790 Sage SE IOMMU group 76:[1a03:1150] 05:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 06)[1a03:2000] 06:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 52)

When i initially setup the server i did about 14 passes of Memtest with no errors. Board is a W680-ACE and supports ECC, memory was chosen based off of the QVL Prior to the constant crashing server was running perfectly stable for 28days up time, no changes made besides periodic updates to docker containers, plugin, etc. I wasn't even monitoring the server anymore. Only reason i found out it crashed is when i a friend asked if Plex was down as i have/had three instances (docker, 2 VMs) of it running on Unraid. Still going through the process of elimination of turning off VMs and Docker container that i'm suspecting of crashing the system. Still haven't nailed it down yet. First i disabled SWAG (duckDNS) since i'm getting a lot of blocked external attacks on the WAN (no fix) Second disabled Plex docker since one of the logs the last fault mentioned a PMS LIBUpdater error (no fix) Third disabled all instances of Tautulli dockers since of the faults mentioned SYN Flooding on one of the ports (not exposed) Fourth and current test. Disabled one of my VMs running Plex as the last fault mentioned something about a qemu error and crashed when i tried to play something other things i've tried is setting all network interfaces back to MTU1500. Although network is configured properly for MTU9000 (no fix) changed bios c-state all to disabled (no fix) changed CPU setting in bios and disabled any performance features (no fix) Ran SMART test on every drive, all passed with no error Ran Scrub on all cache pools, no errors detected/repaired Rebuilt docker image, (no fix) Disabled user defined schedules (zfs snapshots for all datasets). (no fix) there's probably more i've attempted but at this point it's all jammed up. ran a memtest about two crashes ago but only a single pass with no error At the moment i'm moving all my data to a spare DS1821+ as my next move will probably just be to nuke it all and start with a new config and reinstall/reconfigure everything (of course after doing a proper memtest.. or i'll try a proper memtest prior to nuking it. will keep posting my progress up until i nuke the system if no solution if discovered before that a little more system information (all was stable prior to troubleshooting) Docker SWAG - pointing to Overseer (shutdown for troubleshooting atm) Overseer duckDNS (shutdown for troubleshooting atm) Tdarr (server only, nodes external on three different computers/VMs. transcoded over 80k files successfully) Tautulli 3x instances (shutdown for troubleshooting atm) Heimdall Jellyfin (shutdown for troubleshooting atm) Plex (shutdown for troubleshooting atm) (Removed from docker) All *arr apps and miscellaneous stuff i tested out VMs (no cpu cores/threads overlapping) Windows 11 - Plex, tdarr node (shutdown for troubleshooting atm) Windows 11 - Plex, tdarr node Windows 11 - *arr apps only pfsense - intel nics passthrough, network behind main network via blackhole (shutdown VMs) - multiple linux distros for testing use Network Intel X540 dual 10gbe (bonded LACP) host, bridge, vlan tagged Onboard dual 2.5gbe (passthrough to pfsense, VLANd) Realtek dual 2.5gbe (port down not used, will pull out next time i open the case) *side note, removed network cards/networks still show up in "fix common problems" due to having set MTU to 9000 Main System Components Mainboard - Asus WS W680-ACE CPU - Intel 14900K stock no overclock Memory - 128GB ECC Kingston 4x32GB set to rated stock speed/voltage GPU 1 - Intel ARC A40 Pro GPU 2 - Intel ARC A380 HBA - LSI 9211-8i P20 IT Mode Storage Unraid array - 3x Seagate X22 Exos 20TB, 1x Toshiba x300 8TB, single parity Appdata_cache - 2x Samsung 990 Pro 2TB in zfs mirror (all docker and 3 vm) Domaim_cache - 1x Samsung 990 Pro 4TB in zfs (2 vm) Download cache - 2x Intel 480GB DC SSD zfs raid0 (tdarr transcode directory) Raid0_zfs - 2x Samsung 870 Evo 250GB zfs raid0 (used for data transfer external sources and unraid) Transfer_cache - 5x Samsung 870 Evo zfs1 (used for all *arr app/sabnzb data transfers)

set MTU to 1500 and problem still persists... i'm about ready to abandon ship i am at a loss

just had another crash.. I'll try disabling Jumbo Frames... but still optimistic that is the issue log_249118015.log

thank you for the reference... I haven't had any network issues utilizing Jumbo Frames though. And for the complex bonding my switch is setup properly for LACP. I think i may have found the reason for the crashing maybe... I'm leaning towards not having the dGPU(s) not binded via IMMOU. I have binded them and so far this is the longest the server has been up (since the crashing started, I must have changed something at some point). I also didn't start PMS (not sure if one of the crashes was because of Plex docker but noticed in the logs PMS LIBupdater was there. Gonna see how long it lasts.. if the server doesn't crash then i'll try turning PLEX back on

ok this one has some stuff lasted about an hour before it crashed log_233322968.log log_236763968.log

Lasted about 8hrs then crashedlog_203493125.log Darn it and the log is empty.. i'll try again

thank you for the reply/advice meshifyunraid-diagnostics-20240211-1937.zip

I'm not sure what's going on. Server was stable for about a month and now it crashes anywhere between immediate and a several hours. Is there anything obvious in the log files?log_170681484.log