I'm having trouble adding a new drive to my NAS.
After installing the drive and restarting the server, I see the drive available in the array devices dropdown. However, when I select it, the "Disk 2" show "unassigned" and if I click on the dropdown again, the drive is no longer there.
The system logs show this, rapidly repeating:
Feb 15 17:48:12 Alexandria kernel: res 53/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
Feb 15 17:48:12 Alexandria kernel: ata7.00: status: { DRDY SENSE ERR }
Feb 15 17:48:12 Alexandria kernel: ata7.00: error: { ABRT }
Feb 15 17:48:12 Alexandria kernel: ata7.00: configured for UDMA/133 (device error ignored)
Feb 15 17:48:12 Alexandria kernel: ata7: EH complete
Feb 15 17:48:12 Alexandria kernel: ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Feb 15 17:48:12 Alexandria kernel: ata7.00: irq_stat 0x40000001
Feb 15 17:48:12 Alexandria kernel: ata7.00: failed command: READ DMA
Feb 15 17:48:12 Alexandria kernel: ata7.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 21 dma 4096 in
Feb 15 17:48:12 Alexandria kernel: res 53/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
Feb 15 17:48:12 Alexandria kernel: ata7.00: status: { DRDY SENSE ERR }
I tried swapping the SATA cables and ports, but had the same results.
I tried installing the old preclear plugins, but got this from its logs:
Feb 15 18:02:56 preclear_disk_ZL2CDR1T_9878: Pre-Read: dd output: dd: error reading '/dev/sdd': Input/output error
Feb 15 18:02:56 preclear_disk_ZL2CDR1T_9878: Pre-Read: dd output: 0+0 records in
Feb 15 18:02:56 preclear_disk_ZL2CDR1T_9878: Pre-Read: dd output: 0+0 records out
Feb 15 18:02:56 preclear_disk_ZL2CDR1T_9878: Pre-Read: dd output: 0 bytes copied, 252.211 s, 0.0 kB/s
Feb 15 18:02:56 preclear_disk_ZL2CDR1T_9878: Pre-Read: dd output: dd: error reading '/dev/sdd': Input/output error
Feb 15 18:02:56 preclear_disk_ZL2CDR1T_9878: Pre-Read: dd output: 0+0 records in
Feb 15 18:02:56 preclear_disk_ZL2CDR1T_9878: Pre-Read: dd output: 0+0 records out
Feb 15 18:02:56 preclear_disk_ZL2CDR1T_9878: Pre-Read: dd output: 0 bytes copied, 252.343 s, 0.0 kB/s
Feb 15 18:02:56 preclear_disk_ZL2CDR1T_9878: Pre-Read: dd output: dd: error reading '/dev/sdd': Input/output error
Feb 15 18:02:56 preclear_disk_ZL2CDR1T_9878: Pre-Read: dd output: 0+0 records in
Feb 15 18:02:56 preclear_disk_ZL2CDR1T_9878: Pre-Read: dd output: 0+0 records out
My motherboard is a Gigabyte H610M S2H V2 and I have an 850W PSU.
Can anyone point me in the right direction to get this drive added?
