ColtonT

Is there way to determine if there is a wrong mapping? I went into all the dockers and all of their "/config" are stored on "/config/mnt/user/appdata/DOCKER"

I keep getting a warning for "Docker high image disk utilization" and i'm not sure what the issue is. My Docker image is set to 20gb and currently 17gb is being used. I've searched around and it says that a docker may be writing to the docker.img.. I changed where my Plex transcodes but everything else is writing into the Appdata data folder for config and stuff which is stored on my cache drive. My dashboard is also showing 71% memory utilization for docker. This has only recently become a problem (within the last 2-3 days) and I haven't changed anything. Everything was running fine with no errors/issues. I did make a bunch of requests VIA overseerr recently and stream a few things from plex (potentially transcoded) but outside of these 2 things I haven't made any changes for why i would be getting this error. coltonserver-diagnostics-20241004-0737.zip

Wonderful, Thank you much for the assistance and pointing me in the correct direction!

So i just went through this for the one specific to qbit and followed the Q4 and A4 as that was my issue. However I rebooted the entire OS and now whenever i open the webui (for qbittorrent) now on port 8888 it opens up my SAB docker for some reason. I did this resolution for both port 8888 and 8081 and same results of opening up sab.. the URL still opens on the default port of 8080 EDIT: I have figured out how to get to the login screen with VPN Disabled, the "webUI" Option under "advanced view" was directing to "IP:8080" I changed this to reflect my updated port of "8888" However if I turn VPN ON the webui/docker doesnt seem to work anymore.

negative still the same issue. "site cant be reached"

I installed the binhex-qbittorrentvpn docker and changed a few of the ports since it was interfering with my SABNZBD docker however the Qbit docker will not even open a webUI and just gives me the basic "this site cant be reached" the only port i changed was the "Port: Web Interface: 8081" (default is set to 8080 which is what my sab docker is using.) I also changed the "Variable: WEBUI_PORT: 8081" (default is also set to 8080) Not sure what else to really do, I've tried to search around for videos and I'll follow the entire step outside of the above changes and still it will not work.

What is the process to remove the data from the 256gb SSD from the pool and place all the contents on the 2tb NVMe SSD? I want to get rid of the 256gb SSD.

i was able to get it working after rebooting the OS coltonserver-diagnostics-20240918-1325.zip

So the mover was complete and looking under the main tab I’m seeing free space (almost the entire drive) whenever I attempt to download the diagnostics my browser WebUI crashes and I’m not abel to get the zip file for the diagnostics.

So I did what you said with stopping the services and restarting the array, I did the “fndmnt” command and my drive is now showing -rw. I’m running the mover currently and getting no errors. what will the process be if this completes successfully to remove the 256ssd from the cache to allow for the full potential of the nvme 2tb?

what would the process / commands be for both directions? I’m going to try and find another device but likely won’t receive it in a timely manner. I want to get my services back up asap so the backup/reformat might be my quicker option now.

What would be the best way to free up space since it’s read only? And what would the process be to turn it into only 1 nvme drive

So everything looks good? is there a way get the information off the 256ssd? And just use the 2tb to allow for more space? I originally thought I had set it up with no cach to combine the two storages but I may have misunderstood. i currently it setup as 2tb nvme and 256gb ssd = total 500gb. how would I either and preserve the data if possible. (at the very least saving the appdata/docker info, again i don't care so much about the data as almost all of that I can get again, I just don't want to have to re setup all the programs.) 1: remove the 256ssd and only have 2tb nvme or 2: install another 2tb nvme (total for 2x 2tb nvme) for a total for 4tbs (if this is possible) without losing any of the data on the 256sata ssd?

So, i stopped the array to change a few settings and try to add the device again and it still was not working. I then started the array, spun down all the disks. THEN randomly the cache pool recreated it self and is now showing both my SSDs working. the pool is still showing full and I have not attempted anything else yet. I also have attached the diagnostics immediately once this changed. coltonserver-diagnostics-20240917-2134.zip

To add/clarify. I had a 2TB ssd (NVME) + 256GB SSD (sata) pooled together for my cache. I removed the 256GB SSD from the pool in an attempt that was the issue, but now UNRAID is seeing it as a brand new device if I were to try and add it back.

I'm, very new to unraid and just got everything setup following TRASH guides for hardlinks/atomic moves. I was attempting to add a DOCKER for Binhex-QbittorrentVPN when the operation failed and then ALL dockers became unavailable. I then noticed that my cache drive was showing full, so i ran the mover. it completed but was giving "read only" errors and kb/s on some drives. It completed several hours later but still showing the cache drive as full. I rebooted the UNRAID server via the GUI. I did attempt a few of the recommendation found here https://forums.unraid.net/topic/46802-faq-for-unraid-v6/page/2/#comment-543490 However none of them worked and gave me errors. I have paused everything as I'm sort of lost on what to do. My main concern is that I mostly want to keep my DOCKER setup which was stored in the APPDATA folder in the cache. I really don't want to rebuild all of that if I don't have to. I don't care so much of the data that was downloaded and waiting to be moved. coltonserver-diagnostics-20240917-2106.zip