Cololate

Aight - might just go get a new one then, as I dont wanna be in this situation agian, if I can help it :)* There are no splitters. Just 3 disk's and a SSD for cache, and the get power directly from the PSU. Though it is an older one, so I just might think that it could have some issues. I am gonna go out and find a top tier PSU for this one, and see how it goes

Ok, so it ran fine, full rebuild, no errors. tdk-diagnostics-20260726-1843.zip This is from when it finished. I have changed the cables and raidcard before, as I have had this error before, many times. (before I had help here, and just swapped the disks DOH) Could this be a PSU thing? I feel like thats the only thing I have not changed over the years. Its a CoolerMaster G650M - and I would swap it in a heartbeat, if that could be the reason over the years, to the many errors. Thanks agian guys - you are all awsome as always, and I am so happy to be back on track (it seams)

Ill get right on it - thank you so much :) Hope it gets better this time around :)

Back from vacation - and ready to move on Started the server, paused the data-rebuild, made this diag: tdk-diagnostics-20260725-1455.zip Hope I did the right thing of pausing it, otherwise, I know you will let me know ;)

I will do so I just hit another vacation, so it wont be until next saturday. Until then, it has been turned off :)

Thanks! I have unplugged all connections, and now it went well Here is the diag: tdk-diagnostics-20260716-2059.zip

Yea, it makes no sence to me what so ever Newest diag:tdk-diagnostics-20260716-1608.zip I hate beeing this dumb to unraid, but on the otherhand, I feel like its a big thing to learn atm So I really appreciate all the help here.

Alright Then I am getting this, no matter how many times I press it:

Alright! I have done that, and here it is: tdk-diagnostics-20260716-1128.zip This is where I am at now: I have not pressed the FIX botton, just an FYI And agian, thank you so much for all you time and help here! <3

tdk-diagnostics-20260715-2155.zip When I started the array, it started the rebuild agian, from 0. I canceled that, and then made the diag. Hope thats ok. From what I can see, all the data that I had before, is still there to see. Cant see that something should be missing.

Sure thing! tdk-diagnostics-20260715-1600.zip

Damn I stopped it, and here is the smart: ST20000NM007D-3DJ103_ZVT5Y5ZN-20260715-1047.txt wich says nothing I cant seem to get that parity to spin up, no matter what I press, nothing happens. EDIT: I made a restart, and here is a SMART of the parity drive now: ST20000NM007D-3DJ103_ZVT5Y5ZN-20260715-1100.txt And how the dashbord looks: ( where disk 9 is the one that was emulated 'still is')

Follow the guide - and now this is what I got

Right - overlooked that agian - so sorry. I will look into that right away!

Damn, that was my only thought to be honest How do I get it to act normal agian ?

So, we are done, and this is the status update ST20000NM007D-3DJ103_ZVT5ZA0F-20260714-1519.txt From what I can tell, its all good? I have NOT changed the power to the disk yet, but I will if needed for sure! :) The sata cable for the drive was changed before the test was made. If I can do a rebuild, can I just click this: Just figure since I am not changing anything, that I can choose to preserve the current assignments? Thanks agian guys for all the help <3

Yes, can see its 'slow' :D Its all good - rather a good reason to do the right thing here, then a quickfix thats not the right one. I will let it run, and get back here when its done :)

Hi I will run the test right away! :)

Perfect. All I have done is swap the cable, nothing else. I can swap the power aswell, if that might make a difference aswell. Thanks so much :)

Hey all First of all, thanks for all the help so far I have a disk, now that I am back from holidays, thats made an error, or more. I have the smart and dia here: ST20000NM007D-3DJ103_ZVT5ZA0F-20260713-1127.txttdk-diagnostics-20260713-1121.zip I hope they will help. I have swapped the cable, and from what I see, the disk is fine? :) I am NOT the best at this, so I am very sorry if I have missed something or can seam a bit slow. Could I just run a new config and see how it goes? Thanks agian guys :)

Its all new cables, bu tI can try and swap between two disks(one of them that needs to be pulled anyways), and then I will try to run a check agian. Should I still have the Write corrections to parity - marked when I do this?

Sure thing - sorry I forgot that in the first place :)tdk-diagnostics-20250626-0907.zip

Hey guys So, first of, I have had some issues with my server: https://forums.unraid.net/topic/189864-disks-keep-on-dieing-but-only-in-unraid/page/1/ What I have done from here is to buy a new disk, box fresh, zero'ed and put it in the system. From there I have emptied my 3 x 8 TB disks onto the new 20TB disk. Al went well, all was good :) Then I decided to run a check, before taking all the 8 TB disks out, and just run with 2 x 20TB disks and a 20 TB parity drive. When I did this, I got errors on the new disk, and corrections to the parity: Question is - whats up with my server? Is this normal, or do I just have a bad parity or what? :D Let me know If I need to send anything, and ill do so. The system has NOT been rebooted after the check - so all data that you would need, should be there.

Perfect Then I can turn on the docker agian? dont know if I even use/need the VM? Or is there more to it now?