stradle

Can someone please point me to one of the older working ones please. I seem to have removed all the older ones. Thanks

Hi, I just tried it as a fresh install and changed the custom directory to something slightly different on my cache drive. But getting the same issue of it just trying to install forever. Then when I went to delete it, it was massive (GB's) Not sure if it something I have done or if same problem with the .conf file? I have used all your files (Sab, Sick, Couch) for the last year and always worked great, so would want to say thanks so far for those Keep up the good work.

Thank you. downloaded the conf file on first post, replaced the new details : # sabnzbd PACKAGE_URL http://sourceforge.net/projects/sabnzbdplus/files/sabnzbdplus/sabnzbd-0.6.14/SABnzbd-0.6.14-src.tar.gz/download PACKAGE_FILE SABnzbd-0.6.14-src.tar.gz PACKAGE_MD5 249dc97ed187065198bcb83acb04738b and : PACKAGE_VERSION_STRING 0.6.14 closed SAB, deleted all the old SAB stuff, config etc. Rebooted, remounted cache, went to unmenu installed SAB -> downloaded successfully, clicked install... waited... The page has frozen and I cant access unmenu now. I rebooted over telnet and retried x2 but same thing. Cant get it installed. Think I will have to do a reboot again and go backways I was trying to do the exact same thing today and also stuck on trying to install. When I click install, it just never finishes and crashed Unmenu. Cant say for sure what the problem is, but it isnt just you who is getting this. I feel I may have already dont some rash moves trying to fix it. Anyone know the issue?

Getting an error that says "Error: No data found! Ensure your drives are connected or use "Set Location". To re-download, remove the torrent and re-add it." On version 2.33 I have a watched folder setup and then a different download folder, this used to work. Thanks

It would be better if the array came online on boot, but that does not really matter. I need the disk /mnt point to exist... or I create it... which can be a problem... but one I don't plan on "working around" as it would be a lot of checking I do not want to really add to the package. Anyway, my install at the end does do a check to see if the mount points exist... but I will have to look into that if the array comes up in stopped mode and my package is set to re-install on reboot. Thinking about it now, the package might cause a slight issue if it is set to re-install on reboot and the array does not come online automatically. Will look at the package and upload another if I find anything. Is this a feature of 5.0 that the array doesn't come on automatically? I upgraded from 4.6 to 5.0-beta11 and this was one of the things that was different, but something I didn't necessarily want. I was thinking that I would just have to: Install the packages once - to my cache drive. Not enable on reboot. Then on reboot start the array. Then in Unmenu 'Start' the package But that seemed to then say that the /etc/rc.d/unraid.d/rc.unraid_sabnzbd didnt exist. Let me know if you think this might be where my issues are, I can always just go back to installing it all manually, but just liked the idea of these scripts, thanks for your help so far. EDIT: Do you know if 5.0-beta 11 - the array can be started automatically?

No problem, appreciate the change. I will try it again tonight. One question I did have was, am I meant to enable the package and the Couch Potato, Sickbeard packages to 'reinstall on reboot'? With UNRAID 5-beta 11, my array doesnt start automatically. I have to start it from within the Main screen, so the Cache drive isnt mounted yet. This seems to cause a whole world of trouble with restarting my server, none of the web apps are loading properly after a reboot. Thanks

Thanks for your reply on the other thread ProStuff - I looked a bit harder and hunted out all 3 packages that you modified, so I decided to start again. Managed the Sickbeard, Couch ones perfectly, but having trouble with the SAB. I have used the one posted in the 1st post here, replacing the one that is bundled in the 'Pkg Manager' of Version 5-beta 11. - this one looks out the more recent version 0.6.8. When I run it, it seems to get stuck. Here are the steps it does carry out: Downloads the SABnzbd-0.6.8-src.tar.gz file correctly. When I go to install my SAB location only has a 'proc' and an 'sbin' folder My browser is still processing the install /etc/rc.d/unraid.d/rc.unraid_sabnzbd stop and start are not appearing The Start and Stop buttons are not appearing in the User Scripts It just sits there hung. I have left it running for over 30 minutes thinking it might just kick in. While keeping an eye on the install directories for any movement. Any ideas?

Just used this after upgrading and tidying up the server. Worked brilliant, thanks a bunch for it. For some reason though, although Start and Stop scripts have been created in the file system, only buttons for: Start Couch Potato Start SABnzbd Stop SABnzbd Stop Sick Beard So I am missing.... Stop Couch Potato Start Sick Beard Does anyone know why this would be? Another question I had is a bit amateur I am sure, but before I had these starting up in my GO script, are you all just starting them manually from the User Scripts using the buttons now, or are you still doing something to kick them off when the server boots up? Thanks in advance, Martin EDIT: Now thinking it might be because I set the Packages to re-install on a reboot, so I disabled them all and rebooted. This time, I have only the Start, Stop for SABnzbd and none of the others showing up. When I try starting it, I also get this error "The rc.unraid_sabnzbd script does not exist, please try reinstalling the application" From that I take it I should be enabling it to reinstall from the package menu, but when I did this initially it booted in to the SABnazbd install wizard, Sick Beard had errors and Couch Potato just wouldnt load. Could it be because I changed the install path slightly for them all by editing the configuration variables in the Pkg Manager?

I know this is an older thread, but I was looking to upgrade from 4.6 to the latest 5.0 beta 11. When you say "just upgrade the flash drive to the 5.0beta7 version of unRAID" Do you just have to clear all your current custom files off and then copy the ones you want back on, reinstalling the packages? Or is there a better way to do it? I would quite like to clear out a lot of stuff and tidy it up.

Thanks for help guys. Got it going now, issues were the '/' instead of '\' and the case was wrong on movies needed to have capital 'M' movies. It's now working through a backlog.

Couchpotato is meant to move Movie downloads from the Downloads folder (my cache drive) to my Movies folder, but I cannot get it working. I have tried telling it to more from the following: \mnt\cache\downloads\complete\movies to \mnt\user\movies \\ipaddress\downloads to \\ipaddress\movies Both these paths work when I browse from my Windows machine, also top works in Sickbeard and in Sabnzdb, just cannot get it to pick up in CP. Anyone got this working or have an issue with it? Also any pointers on other options for folder paths would be great. TIA

Hi, no the HDD's are not showing up, but neither is a seperate hard drive that I connected completly outwith the backplane which is strange. Would this be the cause of it not allowing me to use the 'mkdir' command? I will need to check the VT-d support, not sure about that, but the hard drives are functioning currently in my Unraid setup just not when I use ESXi. I look forward to trying your guide out, but any other ideas until then I would appreciate, cant believe how early in the current guide that I am stumped.

Hi, I have finally managed to install ESXi 4.1 on to a USB drive (needed to use the NIC drivers modified ISO as my NIC is Realtech as mentioned in this link http://engwar.com/post/392) When I go to step 2 of the guide on the first page, I hit some stumbling blocks. My hardware setup is: Antec Nine Hundred Two Case Intel Core i3 540 3.06G s1156 Asus P7H55-M/USB3 - Motherboard CAIR 650W CMPSU-650TXUK CORSAIR 4GB XMS3 PC3-10666MHz 5x 2Tb HDD (3x Western Digital, 2x Samsung) # Identify your disks fdisk -l | grep '^Disk' ... Disk /dev/disks/t10.ATA_____ST3160812AS_________________________________________5LS3P8SB Disk /dev/disks/t10.ATA_____WDC_WD1600JS2D75NCB3__________________________WD2DWCANM7450414 Disk /dev/disks/t10.ATA_____WDC_WD1600JS2D75NCB3__________________________WD2DWCANM7453963 ... mkdir /vmfs/volumes/datastore1/UnRAID cd /vmfs/volumes/datastore1/UnRAID vmkfstools -a lsilogic -z /vmfs/devices/disks/t10.ATA_____ST3160812AS_________________________________________5LS3P8SB mydisk1.vmdk vmkfstools -a lsilogic -z /vmfs/devices/disks/t10.ATA_____WDC_WD1600JS2D75NCB3__________________________WD2DWCANM7450414 mydisk2.vmdk vmkfstools -a lsilogic -z /vmfs/devices/disks/t10.ATA_____WDC_WD1600JS2D75NCB3__________________________WD2DWCANM7453963 mydisk3.vmdk # NOTE: you we're using /vmfs/devices/disks here ... not /dev as above! -------------------------------------------------------------------------------- fdisk -l | grep '^Disk' This is only showing up USB drives, none of my 3 bay SATA backplane drives are showing up which I use in UnRaid http://www.scan.co.uk/products/jou-jye-st-3051ss-525-(3-bay)-backplane-for-5x-35-sas-sata-hdd Anyone know why this is? The next issues I have is that whenever I try and make a directory (mkdir /vmfs/volumes/datastore1/UnRAID) It is also stopping me from creating this. login as: root [email protected]'s password: You have activated Tech Support Mode. The time and date of this activation have been sent to the system logs. VMware offers supported, powerful system administration tools. Please see www.vmware.com/go/sysadmintools for details. Tech Support Mode may be disabled by an administrative user. Please consult the ESXi Configuration Guide for additional important information. ~ # fdisk -l | grep '^Disk' Disk /dev/disks/mpx.vmhba33:C0:T0:L0: 3170 MB, 3170893824 bytes ~ # mkdir /vmfs/volumes/datastore1/UnRAID mkdir: cannot create directory '/vmfs/volumes/datastore1/UnRAID': No such file o r directory ~ # it seems everyone else is having trouble in this thread after getting the initial setup complete without any hitches. Any help on these topics would be appreciated.

After it has been working for a 48hours now. Whenever I login I get a messagebox: "Error" with the messagebox title "Error on Webpage" It managed to load the catalog but does not show the right hand side menu which would normally show what other users have been listening too, wondering if there is some way to reset that or if anyone has any ideas of what I should try? Even if I play songs, the right hand side does not show up with myself as the user and the track I am playing. Thanks, Martin EDIT: After looking in to this a bit more, it seems I have a player which although removed from the "Players" in the settings is still existing in the "Status" menu. It is also for an artist that has since been removed from the music catalogue. The logging screen is constantly giving this error: [1/29/11 10:54:54 AM GMT] WARN FileUtil Failed to list children for /mnt/user/music/Nine Inch Nails/Year Zero/

Love the way this works with sickbeard got all my downloads going to my 'cache' drive. Has anyone managed to create processing scripts for other category types such as music? Would love a scheduled script that would order music and move from cache - music folder as Artist\Album (year) Was also looking to schedule the Sickbeard script to only move TV eps weekly or something. If anyone knows of anything like this, let me know.