helio

Could also be your DNS settings Yeah I tried that already but no luck... until 6th time it just worked.. go figure Thanks for you help

Looks like you're correct. If I turn a VPN on I CAN get to https://index.docker.io/v1/repositories/balloob/home-assistant/images ... Turn it off, timeout... Gah.. Stupid ISP.

Nah - just plain old straight through ADSL... Australia based...

Weird. Net seems to be working fine for everything else. rebooted everything cant seem to find a problem

Hi Balloob, Thanks for this - looks interesting.. was gonna give it a go but I get the following error on install after dling about 140MB? Unable to find image 'balloob/home-assistant:latest' locally Post http:///var/run/docker.sock/v1.19/images/create?fromImage=balloob%2Fhome-assistant&tag=latest: EOF. Are you trying to connect to a TLS-enabled daemon without TLS? The command failed. Any ideas?

Thanks BRiT. I am assuming I need the following cables "SAS to SATA Reverse Breakout Cable" ref# http://lime-technology.com/forum/index.php?topic=7003.0 Thing is I am also assuming I can't just plug some of the SATA plugs in and leave others empty right? So I would need to make sure that the MOBO had 8 SATA ports if I wanted to use only 6 HDD... if I didn't want to buy a Supermicro AOC-SAT2-MV8 8-Port SATA II Controller Card just yet anyway (not a problem I would have had with the 4020). Also - do you know if using 2 SATA II and 2 SATA III MOBO ports on the same Breakout Cable would be a problem? Thanks

Ahh - sorry, I understand now On a side note - looks like the 4020 I ordered is being change to a 4220 due to stocking issues - so I guess I should be looking at SAS not SATA... more $$ to shell out... Thanks for your help.

Sorry - what would the benefit of that be from a speed perspective? Is unRAID a little slower or would I be able to use Dual Lan outside the array?

It might not be the bottleneck you are concerned with. How are you planning on using unRAID? For home use. As a general NAS and for use with a distributed Media centre. I am using LinuxMCE http://linuxmce.org/ and currently have 2 media directors that may be drawing HD content from it at the same time. That should all be fine with a single Gbit connection though. Mainly I wanted Dual LAN just to make transferring large files / ISOs across a little quicker....

Fair point. I guess I'll go back to the drawing board. Considering Dual LAN / Teaming isn't going to work it might not have been worth it anyway. Is there anyway to do some kind of LAN bridge that you are aware of? Seems that this is the bottleneck currently. I was hoping this might help me side step it... Thanks for your help Helio.

Thanks queeg. I noted that in the other post I referred to above, but assumed this could be turned off in BIOS. I guess I better make sure that is the case. If it was off in BIOS - this shouldn't be an issue right?

Hi All, Looking at building an UnRaid server with a Norco 4020 (recently purchased). To begin I will only be using the 6-8 onboard SATA connections. After 6 months I will start to expand with PCIe for extra SATA connections as required (up to 20). Key decision now seems to be the MOBO. I am in Aus and a few that have been suggested are either old, unavailable or rather expensive. This one seems to have the key things I want: MOBO: Gigabyte GA-890FXA-UD5 AMD http://www.centrecom.com.au/catalog/product_info.php?sort=3a&products_id=46315 That is: Dual LAN 2 x Realtek 8111D chip (10/100/1000 Mbit) Support for Teaming Support for Smart Dual LAN 6-8 on board SATA 2 x SATA 3Gb/s connectors 6 x SATA 6Gb/s connectors Only reference I found on the forums was for the Gigabyte GA-890GPA-UD3H - which is similar but lacks the Dual LAN: http://lime-technology.com/forum/index.php?topic=6745.0 Anyone have any comments/suggestions or feedback on this board? Will Dual LAN/Teaming work with UnRaid? I am not set on AMD. Intel are ok too.... Mainly depends on the MOBO. Many Thanks! Helio EDIT: LAN teaming doesn't work apparently :-( http://lime-technology.com/forum/index.php?topic=3751.0