vlad1966

So I've recently set up a new server for UNRAID that has 4 4TB Seagate IronWolfs & a 500GB WD M.2 NVMe SSD. I'm using the latest version of UNRAID, 6.9.2 & trying to add the M.2 drive as a cache drive, however I'm not seeing any options anywhere on the page where you add drives/set up pools to add a cache drive. I thought it was supposed to be the last option in the drives list but it's nowhere on the page. Thanks

I just downloaded this plug-in. Looks great, except that I can't use it because it won't let me un-check Dry Run, so can't move any files. I'm using FireFox, latest version. Tried MS Edge, same issue. Will try Google Chrome next . . . Same issue in Chrome. Am I missing something????

Thanks RobJ, Actually, it's working now - seeing all 4 HDDs. Guess it was a bad flash, though it seemed to go OK doing it on one of my newer PCs in EFI mode. I pulled out my old workhorse from my closet - and Athlon II X4 640 based PC, mobo with PCIE 2.0 x16 slot & was able to flash using the instructions here: http://www.vladan.fr/flash-dell-perc-h310-with-it-firmware/ Happy Camper

OK - no go with the new cable. It looks like unRAID is recognizing the controller, but no drives still. I'm attaching the diagnostics log. Hopfully someone can look at it & let me know why unRAID isn't recognizing drives when they're connected to the H310? syslog.txt

I bought a new cable off NewEgg yesterday, a Coboc brand, for $10, and should receive it tomorrow. I'll report back once I get it. also, mu unRAID server has an ASRock H110 based mobo, and my PC has a Gigabyte. Hope that won't be the issue.

OK, after much difficultyI finally managed to flash the PERC H310 I recently bought on eVay to IT mode, but its not recognizing any of the 4 SATA DRIVES I connect to it. Firmware is P16 version, but I didn't flash a Bios since I wanted a faster boot time and thought the BIOS isn't needed if using the H310 in IT mode. The SFF8087-to-4SATA CABLE I bought off eBay also for $8 was advertised as a forward breakout cable and appears to be in good shape. Neither my unRAID server or my regular PC is recognizing any drives when connected to the card/cable. In my unRAID SERVER I can see it recognize the card during boot and also the drives I think, but drives are not found by the web GUI. In my PC, again, device manager can see the card with no issues, driver loaded automatically by Win 8.1 but no drives are seen. One of the metal brackets around the SAS connectors has come loose from one side but I can plug the cable into both connectors securely and Ive tried the cable in each connector. I'm suspecting the SFF8087 cable is bad unless I'm missing something else. I might go to my local Frys to try another SFF8087 cable, but I'm not looking forward to paying $35 for it. Any ideas?