flake

Thanks, that resolved the issue

I added the docker yesterday and continually get disconnected every minute with the following entry in the log. I'm using SWAG. From reading the FAQ if I set the use self cert to no then the coder server becomes unavailable, if I set it to yes then I can access the code server as normal but experience this issue. [2022-02-22 11:23:35.735] [remoteagent] [error] [172.19.0.5][028827a7][ExtensionHostConnection] Unknown reconnection token (seen before). [2022-02-22 11:23:35.744] [remoteagent] [info] [172.19.0.5][0242f291][ManagementConnection] The client has disconnected gracefully, so the connection will be disposed. [2022-02-22 11:30:07.315] [remoteagent] [info] [172.19.0.5][de3cee2d][ManagementConnection] New connection established.

Apologies, but I have to concur with Brit here, scrolling is for browsers.

needo, i've installed your docker for sabnzbd. can you confirm a "bug" with the port setting? If you change the port from anything other than 8080 the alternative port isn't written to the sabnzbd.ini, the port is always written to the ini as port 8080. I've stopped the docker, manually edited the ini to port 8085 and restarted the docker, the port is written back to the ini as 8080. If you edit the docker port setting from the webui, while the docker is running, and apply the new port, port 8080 is still written to the ini regardless of what port you've set in the webui.

Hey all, wouldn't it make sense to split the plugins section into 2 separate sections, 32bit and 64bit?

OK guys, so I've resolved the issue! I had totally ignored the Settings/Share Setting options. I had included disk1,disk2. Once I'd removed that and restarted the array, disk3 is now included.

Thanks all, I'm currently at work and will post a screen shot when I get home. Although I don't think this is a simpleFeatures issue as I've since removed simpleFeatures and from memory the current Include and Exclude settings on all my shares are empty. I'll post a screen shot once home.

I removed disk3 from my case, attached it to my main PC and used Partition Magic 8 to remove any partitions etc. I then reinstalled it in the unRaid box. unRaid detected it required formatting and I then selected the format option. One the disc was formatted it was allocated to the array. Unfortunately It still doesn't display as part of the array. It's now 1am and I need my beauty sleep. Does anyone have any other suggestions?

Yes, disk3 has been added to the array. I've also remove Simple Features now and back to using the stock webGUI and adding the disk to the array still doesn't add it.

So, after running preclear for 9hrs on the 3TB that wasn't being added to the array initially, the disk is still not being added to the array. ================================================================== 1.13 = unRAID server Pre-Clear disk /dev/sdc = cycle 1 of 1, partition start on sector 1 = = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = Step 7 of 10 - Setting partition 1 to precleared state DONE = Step 8 of 10 - Notifying kernel we changed the partitioning DONE = Step 9 of 10 - Creating the /dev/disk/by* entries DONE = Step 10 of 10 - Verifying if the MBR is cleared. DONE = Disk Temperature: 35C, Elapsed Time: 9:05:37 ========================================================================1.13 == WDC WD30EZRS-00J99B0 WD-WCAWZ0049737 == Disk /dev/sdc has been successfully precleared == with a starting sector of 1 ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdc /tmp/smart_finish_sdc ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Temperature_Celsius = 117 120 0 ok 35 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. root@Tower:/boot# root@Tower:~# df -h Filesystem Size Used Avail Use% Mounted on tmpfs 128M 128M 0 100% /var/log /dev/sda1 7.5G 366M 7.2G 5% /boot /dev/md1 2.8T 2.8T 23G 100% /mnt/disk1 /dev/md2 2.8T 2.7T 127G 96% /mnt/disk2 shfs 5.5T 5.4T 150G 98% /mnt/user /dev/md3 2.8T 33M 2.8T 1% /mnt/disk3 Does anyone have any other suggestions?

I haven't mapped any shares to the PC as at the moment I'm simply backfilling the unRAID box with my media on my Drobos. From reading a few threads in the forums there seems to be a possible issue with adding new disks that aren't pre-cleared and the stock GUI has been replaced with Simple Features. I'm currently moving the media off disk3 again and once this is complete I'll pre-clear it to see if that helps. One thing to note I guess is that the first 2 discs, my initial array didn't have this problem, but Simple Features wasn't installed at that time.

All my shares are set to Allocation method: High-Water Split level: Not set - split function not used Included disk(s): All Excluded disk(s): None I had started to move some data from an old machine to disk3 which is why it is showing a % used. I've added another 1TB as a test, it was formatted from the GUI (Simplefeatures) and assigned to disk4 when formatted, it also has a green ball beside it but it isn't showing towards the total free space (shfs stats) either.

The drive is assigned as disk3, it has been formatted, and there is indeed a green ball beside it

Hi All, I've added another 3TB disk to my array and it doesn't show up as added free space. Is this normal behaviour? Should new drives show as free space once assigned or do they not show until unRAID has started to write to them? I'm using the High Water allocation method. http://pastebin.com/vi3VeRH8