nealbscott

Figured it out! Needed "--runtime=nvidia" in the extra parameters. The 'new' docker didnt mention that, but the old one did.

I just setup my 2nd Unraid box with Folding at home, and they both have the same NVidia card. Yet the cards are detected slightly differently, "Tower1" is working fine, "Tower2" is not. In fact "Tower2" reports the card is unsupported. Yet, "Tower1" is happily folding away. Note the working machine says "NVIDIA GeForce GTX 1660 SUPER" the broken one says "TU116 [GeForce GTX 1660 Super" Both boxes should be using the same versions of everything ... and yet *something* is different.

Currently running Machinaris v0.6.8 on my cache drive, /mnt/user/appdata/machinaris, which is spinning rust. I get plenty of good connections. 8 pages of them in fact. Problem is after a few hours, maybe 4 to 8 hours, more and more of them decide to get an 'SB Height' of 0 when they certainly don't start out that way. Whether they just 'go' to zero, or good connections drop to be replaced with bad... who knows? I havent even begun to actually make new plots. I just wanted to farm the plots I copied from my Windows machine. So may have to get an SSD anyway. I fully expect that running all this on spinning rust is sub optimal. But come on, I expect that the only penalty should be slowness, not failure. I see a bunch of this: "It took 10.17s to apply 816 additions and 10 removals to the coin store. Make sure blockchain database is on a fast drive" I know the blockchain database is not on a fast drive. Heck the wallet is not either. I know my system is older-ish, but 32gb ram, 1gb service from Verizon Fios, and an i5 going 3.4mhz should be enough, right? Sure smells like someone did not develop Chia while on spinning rust or they would have seen this problem. Why do my plots go to an 'SB Height' of 0? My system only shows 10% ram used. Is there any way to tell this docker, or sqllite to go ahead and use more to speed things up? My unraid 6.9.2 system: Model: N/A M/B: Gigabyte Technology Co., Ltd. Z87X-UD5H-CF Version x.x - s/n: To be filled by O.E.M. BIOS: American Megatrends Inc. Version 10c. Dated: 06/12/2014 CPU: Intel® Core™ i5-4670K CPU @ 3.40GHz HVM: Enabled IOMMU: Disabled Cache: 256 KiB, 1 MB, 6 MB Memory: 32 GiB DDR3 (max. installable capacity 32 GiB) Network: eth0: 1000 Mbps, full duplex, mtu 1500 eth1: interface down Kernel: Linux 5.10.28-Unraid x86_64 OpenSSL: 1.1.1j Uptime:

6 days ago I had GPU folding working great. Today I see: 2:58:36: GPU 0: Bus:1 Slot:0 Func:0 NVIDIA:7 TU116 [GeForce GTX 1660 SUPER] 02:58:36: CUDA: Not detected: cuInit() returned 804 02:58:36: OpenCL: Not detected: clGetPlatformIDs() returned -1001 so therefore my GPU folding is broke and flagged as disabled. I deleted/reinstalled the docker (keeping and reusing the FAH appdata folders) and it made no difference. So I am left wondering, did UNRAID NVIDIA stop working when they pulled the plug on it? I didnt think that was supposed to happen? If the only fix here is to install the unraid beta w/the new nvidia plug in, then is the beta ok to install on top of nvidia unraid?

YES!!! No more black screen! Many many thanks!

Unraid 6.2.2 here, brand new install of the Crashplan Docker using the Community Apps plugin. Black screen. If it helps any: *** Running /etc/my_init.d/00_config.sh... Current default time zone: 'Etc/UTC' Local time is now: Sun Oct 23 00:27:33 UTC 2016. Universal Time is now: Sun Oct 23 00:27:33 UTC 2016. groupmod: GID '0' already exists usermod: UID '0' already exists usermod: no changes *** Running /etc/my_init.d/01_config.sh... *** Running /etc/rc.local... *** Booting runit daemon... *** Runit started as PID 53 _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/Tower1:1 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 _XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created. Xvnc TigerVNC 1.7.0 - built Sep 8 2016 10:39:22 Copyright © 1999-2016 TigerVNC Team and many others (see README.txt) See http://www.tigervnc.org for information on TigerVNC. Underlying X server release 11400000, The X.Org Foundation Initializing built-in extension VNC-EXTENSION Initializing built-in extension Generic Event Extension Initializing built-in extension SHAPE Initializing built-in extension MIT-SHM Initializing built-in extension XInputExtension Initializing built-in extension XTEST Initializing built-in extension BIG-REQUESTS Initializing built-in extension SYNC Initializing built-in extension XKEYBOARD Initializing built-in extension XC-MISC Initializing built-in extension XINERAMA Initializing built-in extension XFIXES Initializing built-in extension RENDER Initializing built-in extension RANDR Initializing built-in extension COMPOSITE Initializing built-in extension DAMAGE Initializing built-in extension MIT-SCREEN-SAVER Initializing built-in extension DOUBLE-BUFFER Initializing built-in extension RECORD Initializing built-in extension DPMS Initializing built-in extension X-Resource Initializing built-in extension XVideo Initializing built-in extension XVideo-MotionCompensation Initializing built-in extension GLX Sat Oct 22 20:27:33 2016 vncext: VNC extension running! vncext: Listening for VNC connections on all interface(s), port 4239 vncext: created VNC server for screen 0 Warning: could not find self.pem Using local websockify at /opt/novnc/utils/websockify/run Starting webserver and WebSockets proxy on port 4280 Oct 22 20:27:34 Tower1 syslog-ng[61]: syslog-ng starting up; version='3.5.6' WebSocket server settings: - Listen on :4280 - Flash security policy server - Web server. Web root: /opt/novnc - No SSL/TLS support (no cert file) - proxying from :4280 to localhost:4239 Navigate to this URL: http://Tower1:4280/vnc.html?host=Tower1&port=4280 Press Ctrl-C to exit Openbox-Message: Unable to find a valid menu file "/var/lib/openbox/debian-menu.xml" ERROR: openbox-xdg-autostart requires PyXDG to be installed /opt/startapp.sh: line 21: /config/log/desktop_output.log: Permission denied DownstairsPC.home - - [22/Oct/2016 20:27:48] 192.168.1.4: Plain non-SSL (ws://) WebSocket connection DownstairsPC.home - - [22/Oct/2016 20:27:48] 192.168.1.4: Version hybi-13, base64: 'False' DownstairsPC.home - - [22/Oct/2016 20:27:48] 192.168.1.4: Path: '/websockify' DownstairsPC.home - - [22/Oct/2016 20:27:48] connecting to: localhost:4239 Sat Oct 22 20:27:48 2016 Connections: accepted: 127.0.0.1::57556 SConnection: Client needs protocol version 3.8 SConnection: Client requests security type None(1) VNCSConnST: Server default pixel format depth 24 (32bpp) little-endian rgb888 VNCSConnST: Client pixel format depth 24 (32bpp) little-endian rgb888 Sat Oct 22 20:28:31 2016 Connections: closed: 127.0.0.1::57556 (Clean disconnection) EncodeManager: Framebuffer updates: 2 EncodeManager: Tight: EncodeManager: Solid: 2 rects, 786.592 kpixels EncodeManager: 32 B (1:98324.8 ratio) EncodeManager: Bitmap RLE: 1 rects, 160 pixels EncodeManager: 68 B (1:9.58824 ratio) EncodeManager: Total: 3 rects, 786.752 kpixels EncodeManager: 100 B (1:31470.4 ratio)