Lappen

Hi, Installs the docker, but can't login with admin@example, admin...??? /Lappen

Great - it's working beautifully. Thanks, Lappen

The "??" is when your mp3 files is tagged in v2.3. When tagged in v2.4 the titles and albums is shown correctly. /Lappen

That sounds great...looking forward to hear from you later this week if you can find the time Tia/Lappen

Got it running using the template made by mgworek and Capt.Insan, but as the rest of you fails scanning any files. I have tried different filenaming, different directory structure, different tags, different ID3-versions (2.3 and 2.4 and both)...but really can't get the scanning working properly. When adding one album containing multiple files, often one of the files gets scanned and the rest don't ending in sql errors. Would really love to hear from anyone who has success getting the scanning working properly. Tia/Jacob

Would love to hear how you got it running. /tia Lappen

Personal Music Streaming server Koel is looking great and I was hoping that someone could make a Docker for it or help me out getting it running on my UnRAID? https://github.com/phanan/koel Tia/Jacob

I've tried the 2 LAN ports and same result. The 3rd LAN port is dedicated to IPMI I believe? /Lappen

Hi, thx for your advice. I've started this thread about my problem: http://lime-technology.com/forum/index.php?topic=41104.msg390577#msg390577 I'll try to run a memory test to see if there is a problem with my ram. Didn't knew that memory could cause problems with network dropouts. If everything looks ok i'll try with an add-on NIC. /Lappen

Thx for your input. Hmmmm.....it looks very very nice, but i think its expensive, at least in Denmark it is.... Any other options a little less pricey? /Lappen

Hi, Having a lot of trouble with my existing setup. I am having lots of network dropouts and I have tried about everything to figure out whats wrong - with no luck. Therefore, i would like to buy a new motherboard, CPU and ram. But what should I buy? I would love to have some input from you guys. My rig is shown in my signature and the main use is as fileserver but also Plex, Nzbget, music-server. Thanks in advance Lappen

Thank you. Any ideas what I can do next to solve the problem?

Does it look ok?

# ifconfig docker0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.17.42.1 netmask 255.255.0.0 broadcast 0.0.0.0 ether 06:93:44:9d:1a:8f txqueuelen 0 (Ethernet) RX packets 2370 bytes 187315 (182.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3654 bytes 1385433 (1.3 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.10 netmask 255.255.255.0 broadcast 192.168.1.255 ether 00:25:90:72:2e:ea txqueuelen 1000 (Ethernet) RX packets 235495 bytes 127725156 (121.8 MiB) RX errors 0 dropped 741 overruns 0 frame 0 TX packets 209690 bytes 127817251 (121.8 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 16 memory 0xdf900000-df920000 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 loop txqueuelen 0 (Local Loopback) RX packets 31792 bytes 3736564 (3.5 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 31792 bytes 3736564 (3.5 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 veth40d6fd5: flags=67<UP,BROADCAST,RUNNING> mtu 1500 ether 06:93:44:9d:1a:8f txqueuelen 0 (Ethernet) RX packets 2240 bytes 211155 (206.2 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3518 bytes 1369749 (1.3 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 veth59829ed: flags=67<UP,BROADCAST,RUNNING> mtu 1500 ether 7a:d8:1d:32:8a:18 txqueuelen 0 (Ethernet) RX packets 10 bytes 748 (748.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1290 bytes 112301 (109.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 veth828a21c: flags=67<UP,BROADCAST,RUNNING> mtu 1500 ether 46:d3:19:bb:dc:ae txqueuelen 0 (Ethernet) RX packets 120 bytes 8592 (8.3 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1400 bytes 123057 (120.1 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 vethc84e494: flags=67<UP,BROADCAST,RUNNING> mtu 1500 ether 2a:40:82:6e:05:91 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1279 bytes 110757 (108.1 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 vethddc42f9: flags=67<UP,BROADCAST,RUNNING> mtu 1500 ether 82:f9:a0:44:0b:1a txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1281 bytes 111371 (108.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 # ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: off (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes

I'm really out of ideas... To eliminate any switch or router, I connected my laptop directly to my Unraid box with a crossover cable. Ran some speedtests and still getting 40 Mbps write to the cache drive and 450 Mbps read. On the Unraid GUI I can see some network drops when receiving. Could it be the onboard NIC on my motherboard thats faulty? Can I do some other tests to narrow down the problem. Tia/Lappen

Thanks for your replies. I'm writing directly to the cache drive and not a share. I'll try to make some tests writing to different disks and shares with and without cache enabled...just to see the differences. I'll try another source...but sourcedrive is also ssd. I'm wondering if it could be the onboard NIC? What's the prober way to measure transfer speeds? tia/Lappen

Thank you for your reply...i'll get back with my test results asap. /Lappen

Hi, I'm wondering if my Unraid box is performing as it should. I have measured my speed when copying to my cache drive to 30 Mbps. This is a 1Gb wired Macbook Pro to my unraid box where cache drive is SSD. Is it a fair transfer speed? Or could someone guide me in performing some other tests to see if my setup is in perfect condition. Tia/Lappen

Hi, I'm afraid that my network speed between my unraid server and my clients is not optimal. Could someone guide me through how to test the speed? It looks like i'm connected with 1000Mb/s, but the LED indicators on my switch indicates that it's only 100Mb/s??? Furthermore I can see that I have som network drops. I should be noted that i'm using Cat6 cables between router and Unraid server and the distance between router and switch is 20 meters. Tia/Lappen

I'm in the process of organizing my collection, and i'm using Yate from http://2manyrobots.com for tagging and organizing. Yate is truly powerful and once you get to know the strength of it's "actions" it makes tagging and organizing quick and easy. The developer is very helpful and devoted. I'm creating symlinks to files and folders based on the tags. In that way I can access my music in a lot of ways depending on my needs, and without moving and reorganizing the files in itself. Yate is OSX only.

Thx switchman The end objective is to be able to access the files in a share just like if the files were on my local harddrive (i.e. mounted volume), and if possible that up to 5 different users can access the files each from their own client. Can someone help in setting up the OpenVPN solution for unraid and guide me to my end goal? Tia/Lappen

Hi, been a long time Unraid user and very happy about it, but I need some help. I want to access my shares when abroad and not home. I suppose I need to use some sort of VPN-solution (OpenVPN?), but I need help setting my client and server up? Or is it possible that there might be other solutions than VPN? Tia/Lappen

Hi, I use the same setup, and I used to have the same scripterror, but not anymore. The reason I am using NZBtomedia, is that I had a lot of trouble with files being cut-off, when NZBDrone moved files from download folder. I now use the NZBtoNzbdrone script and it is working perfectly. I had some trouble with the NzbDrone API key, so make sure its the right key. /Lappen

Hi, I'm also having some difficulties with my permissions and moving files around. Sparklyballs (feels funny writing that), could you share how you got NZBGET up and running in the VM? Tia/Lappen

Best practice? Hi, first of all, a big "thank you" to ironicbadger for all the hard work you put into this. Your guides and posts have helped me a lot in understanding all the possibilities in the unraid6/XEN solution. Beeing a novice in all of this, I have some questions. When running applications (i.e. PMS, nzbget) do you store the libraries, transcoding-files and configuration files in the vm or outside the vm? (Of course the media files in itself are stored in the unraid array) Is there any performance difference in or out the vm? How do you choose the right amount of vcpus, ram, imagesize? Of course, it depends on what you want to do with your VM When do you choose to make another VM instead of fitting it all into one VM? Sorry if any of these questions already have been answered somewhere else. Again, i'm all new to this and trying to learn the basics of do's and don'ts regarding VMs. Tia/Lappen