G Speed
-
Posts
280 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by G Speed
-
-
Is this a plugin issue or an unraid issue? Is it even a bug, or just my ocd
I'm on .18 and UD 2024.02.17, I just put in 2 drives to preclear.. Noticed the lower vs upper case - pre array start
once the array is started, They both become uppercase like everything else
-
23 minutes ago, ich777 said:
It sounds like you are trying this in the web browser correct?
Please try a native Plex app like Android or iOS, the web app is known to have issues when forcing a transcode and just display a black screen.
haha, yes I was just testing..
I tried my phone worked perfectly lol
Thanks
-
1
-
-
I just set plex up to transcode, but when I do it just gives me a black screen.. Nothing happens
If I revert back to direct play everything works fine
Not sure what i'm doing wrong
-
On 5/28/2022 at 10:58 AM, Hoopster said:
@DigDug5002 The information above from @G Speed should be taken into consideration. I have never used a Dell server for unRAID but the H310 works fine with my non-Dell hardware. If G Speed has problems with the H310, perhaps one of his other suggestions is a better choice.
What's funny my H310 in IT mode was not happy in my DELL server lmao, backplane got really pissed off lol
-
On 5/30/2022 at 2:42 PM, DigDug5002 said:
So if i flash my h710 mini mono to IT mode then I can use unraid to manage the drives?
Sorry for late response, I don't get notifications
honestly... does the mobo have 2 - Sff-8087 ports?
If so.... just buy 2 cables "they are dirt cheap" go from backplane direct to mobo
don't waste your time flashing anything
Disable the "raid card" and save some power too
-
6 hours ago, DigDug5002 said:
So the other day I bought a r720 and I am wondering what raid card would be best and what else I would need. I currently have a H710 mini mono. and I would like to use unraid to mange raid.
You can buy an HBA330 Mini, You can flash your H710 to IT Mode
You can buy an H730P Mini, and set to passthroughJust want to add..... when I tried my H310 with my R530 it didn't work and gave me a backplane error
-
Trying to troubleshoot Spinup Issues
-
You sharing your Plex with anyone?
are you using plex? Could be someone... deleting -
1 hour ago, G Speed said:
All perfect, did it yesterday...
5 minutes ago, trurl said:I understand your description just fine. The (tiny) screenshot in an earlier post seemed to show it being slow after 6 minutes, but the description in that screenshot also talks about pausing. Can you give a screenshot that shows it being slow after it has run continuously for several minutes?
-
5 minutes ago, trurl said:
That looks excellent (of course). Can you show us the problem after it has run for a while?
I think you missed the original issue, the above is me spinning up the drives and starting.. it will do the parity scan at full speed "according to the benchmarks" for the full duration.
On the other hand
When unraid starts parity, when disk are spundown
It won't hit over 60MB/s, 1min..40mins.. doesn't matter.. doesn't catch up.. doesn't slow down -
10 minutes ago, trurl said:
Why did you give us a screenshot showing it has run less than a minute? Demonstrate it is still happening after things settle.
Total size:6 TB
Elapsed time:44 minutes
Current position:525 GB (8.8 %)
Estimated speed:193.1 MB/sec
Estimated finish:7 hours, 53 minutes
Sync errors corrected: 0
Everything is 100% fine when I spin up drives
-
6 minutes ago, Squid said:
I have always seen this, on every server and every OS version/ For the first min it's slow and then gets up to speed. Doesn't bother me because it always picks up to the max and it's the average time and speed when it's done that's important.
First minute sure, not 16mins
26mins still same
Stop parity, try again same
Spin down, spin up
-
-
7 minutes ago, JorgeB said:
Try testing with the diskspeed docker, it might help identify the issue if it's just one disk/model, unless they are all the same.
All perfect, did it yesterday...
-
6 minutes ago, JorgeB said:
IIRC this happened before to someone else, i.e., disks being slower if woke by activity, don't remember if you found if the problem were the disks or the controller.
This is my concern..... Parity whatever..
I can spin up then start.
But what's odd is when parity is running, and I pause it.. and wait..
All drives are spun up, if I resume.. same slow speed.
If I spin down, then up again full speed!
-
1 hour ago, Squid said:
Have you let the parity check run for a couple of minutes (The snip shows it ran for 7 seconds)? What you're seeing is basically normal and the speed should be more or less identical after it all levels out and calms down.
I can try sure, but I have never seen this behavior on my other unraid systems
-
Downgraded to 6.9.2 same issue
-
So I'm testing a new server....
Using Version: 6.10.0-rc5
Here is what's happening...
Drives Spun Down... I click check parity, Drives spin up. I get 50-60MB/s per drive
I Cancel...
I spin drives down.. then I spin drives up
Start parity, I get 200MB/s per drive
Cancel.. Spin Down..
Click Parity... 50-60MB/s
I can replicate this every timeLog SHOWS nothing
May 3 21:24:47 Tower2 emhttpd: read SMART /dev/sdb May 3 21:24:48 Tower2 emhttpd: spinning up /dev/sdh May 3 21:24:52 Tower2 emhttpd: read SMART /dev/sdh May 3 21:24:52 Tower2 emhttpd: read SMART /dev/sdd May 3 21:24:53 Tower2 emhttpd: spinning up /dev/sdi May 3 21:24:57 Tower2 emhttpd: read SMART /dev/sdi May 3 21:24:58 Tower2 emhttpd: read SMART /dev/sde May 3 21:24:58 Tower2 emhttpd: spinning up /dev/sdc May 3 21:25:10 Tower2 emhttpd: read SMART /dev/sdc May 3 21:25:10 Tower2 emhttpd: read SMART /dev/sdf May 3 21:25:10 Tower2 emhttpd: read SMART /dev/sdg May 3 21:25:11 Tower2 emhttpd: read SMART /dev/sdh May 3 21:25:11 Tower2 emhttpd: read SMART /dev/sdi May 3 21:25:11 Tower2 emhttpd: read SMART /dev/sdc May 3 21:25:20 Tower2 kernel: mdcmd (46): check May 3 21:25:20 Tower2 kernel: md: recovery thread: check P Q ... May 3 21:25:27 Tower2 kernel: mdcmd (47): nocheck Cancel May 3 21:25:27 Tower2 kernel: md: recovery thread: exit status: -4 May 3 21:25:38 Tower2 ntpd[1526]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized May 3 21:26:30 Tower2 emhttpd: spinning down /dev/sdh May 3 21:26:30 Tower2 emhttpd: spinning down /dev/sdg May 3 21:26:30 Tower2 emhttpd: spinning down /dev/sdd May 3 21:26:30 Tower2 emhttpd: spinning down /dev/sde May 3 21:26:30 Tower2 emhttpd: spinning down /dev/sdb May 3 21:26:30 Tower2 emhttpd: spinning down /dev/sdf May 3 21:26:30 Tower2 emhttpd: spinning down /dev/sdc May 3 21:26:30 Tower2 emhttpd: spinning down /dev/sdi
It's a Dell R530, with an H730 set to HBA <- Yes it's a proper IT Mode, full disk pass to OS, Smart Etc...This is when unraid calls for a spinup for parity check
I will cancel the above.. SPIN DOWN the array.. then SPIN UP.. Start parity check..
-
3 hours ago, Maxrad said:
I refer you to my post here: Search of SMB shares not working (MacOS client)
This this solution improved my experience on macOS working with files on Unraid. I too experienced much frustration shifting away from AFP to SMB as the experience seemed much slower. However, with the right configuration changes (both client-side and server-side) I discovered SMB can be as good, if not superior, to AFP. I hope it helps you out.
Thanks! going to try the fixes right now the kb on 45 drives got updated as well for bigsur -
Hey everyone,
Quick thanks to the girls and guys on discord!
so I'm having some crazy issues and I have no idea how to fix them, I'm brand new to Mac wanted to try something different
First thing I noticed was I can't search my unraid server, not command + space.. but just a regular folder search. I did get it working very shortly, but it caused the server to unmount and need to be reconnected every time I left finder.
aka I would click on share, it would load an empty folder, then kick me back out to main... then would need to reclick to login in again.
Second Issues, unraid created a folder/file "torrent"..for some reason I can't see the directory on the Mac... I can view it on windows and the webgui
I went into unraid and enabled MacOs Operatbility thing under SMB, and guess what it worked!! I could see the directory....but no files in it...
So I wanted to try something, so I created a new folder within.. and it gave me an error code 43
Some google searching hit me with thisNo idea how to replicate this in unraid...
Thanks in advance -
I didn't even know they did youtube lol
-
I'm planning on putting together a new server, If I set it up with the 30 day trial.
Can I move over my actual unraid license afterwards?
It will probably take a few days to get everything setup and running -
I may have 2.....
-
actually it's just an i3 on one of my rigs
xmrig off
total used free shared buff/cache available Mem: 15884 1906 2546 738 11431 12931 Swap: 0 0 0Xmrig on
total used free shared buff/cache available Mem: 15884 4268 197 738 11418 10571 Swap: 0 0 0
Unassigned Devices - Managing Disk Drives and Remote Shares Outside of The Unraid Array
in Plugin Support
Posted
alright perfect