G Speed

Got This Dec 31 09:43:45 Servo shfs: share cache full Then noticed it was moving files to the appropriate disk, Not all files just the file that was extracting that would have made the disk full? I'm assuming it's designed this way?

Rebooted.. No Change.. Tried to play the file I can't move.. FAIL <-okay no problem Tried to delete the file.. it's actually reading/writing to parity and disk?!

Maybe next year.. 983 out of about 7448 chunks balanced (984 considered), 87% left 20 hours... or so 31.3 MB/s.. then stalls to.. 2MB/s Then back up.. going to cancel it reboot server

Correct, when I look directly in my Cache Drive it shows a folder 4K Movies That's Empty The file that's trying to move over is in my appdata/sabnzbd/incomplete I'm at work, not sure.... It was going super slow, it's an SMR drive, that is almost full, each file is on average 40-50gb So speeds are all over the place

Mixed I think it's a good idea, but on the other hand.. I feel like Unraid is "parity,disk+cache"

Yes, I was downloading some big files "so my cache wasn't able to keep up" so I disabled it for the time being to write directly to disc " I see nothing in my 4k Movies Folder on the Cache drive" What needs to transfer over though hasn't been extracted yet, so it won't make difference here is what's happening Sabnzbd Movie Failed - Write Error etc.. etc.. Files are currently on the cache drive, "incomplete" as they haven't extracted yet <- which is how I set it up When I hit retry - Sabnzbd starts unpacking <- which starts writing to Disc 3 "4k Movies" I can see in Sabnzbd 20/2XX unpacked If I go to my Disc 3, I can see the movie size growing....500mbs, 1gb, 1,3gb etc.. Until it just stops somewhere and goes back to Write Error

Sorry! - Corrections It's called 4k Movies All drives set to fill up Problem 1 Cache to 4k Movies "Disk 3" Problem 2 4k Movies Disk 3 to Disk 3 I'm not trying to copy or overwrite I'm just trying to move it within the same Disk As for almost full, I have an empty 10tb "disk 4", which I will add to 4k movies But I don't want to leave 300gb wasted

Done Please note: I'm currently running a Balance on problem disk servo-diagnostics-20201217-0925.zip

Problem 1 Downloaded something The file is in Cache right now, but it won't extract to disk Sab shows ERROR: write error Unpacking failed, write error or disk is full? Somewhere during extraction - Last I checked it was around 30gb extracted to drive It's not a Sab or Cache problem 294 GB Free on Drive Min Free Space is set to 100GB - 8tb hd File is 120GB Problem 2 Disk Structure Disk 3 Folder - 4k Movies Folder - Random Movie For some reason, I cannot drag and drop the movie in random movie folder into the main folder? All I can see is the drive is reading.... reading.. I see it start transferring "in windows 10" Then when it finishes.. no new file, movie still in folder No Smart Errors btrfs filesystem df: Data, single: total=7.26TiB, used=6.99TiB System, DUP: total=8.00MiB, used=880.00KiB Metadata, DUP: total=8.00GiB, used=7.39GiB GlobalReserve, single: total=512.00MiB, used=0.00B Issues are on the same Disc..

I assumed that, but I wasn't sure Thanks!

Something is wonky with one of my disk Anywho, it's part of my 4k movies share.. I'd rather keep the drive in the array, even if it will fail.. It's not critical data.. and I'm only losing 150gb... My 4k share is set to fill to 80gbs Is this a bad idea on a 8tb disk.. using btrfs? If it is let me know, if not.. how can I stop data from getting transferred to that drive 'disk 2", but keep it in the 4k share? Hope this makes sense?

Hello, Got 2 10tb Seagate expansion drives "Barracuda Pro" Before I Shuck them just want to make they are all okay, did 1 cycle on the binhex-preclear Took about 49 hours Attached is both smart reports THanks in advance! preclear_finish_ZA2BGYZ7_2019-12-01 preclear_finish_ZA2BV108_2019-12-03

So I scrubed all my drives 0 Errors...

Everything else is fine, doing a non correcting parity check now.. 2TB left; no errors so far..

Correct, but that happened previously and no increase. So why can't I move files over? Back to the same problem.. bug with the rc?

Did I mess something up? Drive is FINE? SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 5588 - smart.txt

Hmmm disk is spun down.. but it seems to be working? Offline data collection status:0x00OOfflinedatacollection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status:243Self-test routine in progress... 30% of test remaining.

This is correct? === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 972 minutes for test to complete. Just to confirm, I can't see anything on the unraid server.. as in that disk is Spun down

Might as well just do extended smart then Is this correct? smartctl -t long /dev/sdc followed by smartctl -a -A /dev/sdc >/boot/smart.txt

Can I do a parity check on a single disk?

Thanks for catching that I will fix that up, but trying to figure out the disk issue more so One thought, when I "scrub" it's only reading existing data.. not free space. So the whole disk is not being read. Should I do an extended smart? At least the whole disk will be read... On that note, what comand do I use for that + logging?

It is IT mode? H310 Flashed Even on boot it shows 6 - Non-Raid

First things first - how come I can't click SMART on any of my disks? Extended test short everything is greyed out

It was still running Error summary: csum=231 Corrected: 0 Uncorrectable: 0 Unverified: 0 Diagnostic attached, after it finished Should I scrub with repair enabled? servo-diagnostics-20191125-0844.zip

So I removed all the corrupted files, and replaced them with the same... So I was exactly at 158gb again, then tried to move that 64gb file again "I also redownloaded" I'm doing another scrub, to see if any new files etc. messed up I looked at diagnostics, Disk 2 no "new" errors or issues? servo-diagnostics-20191124-1511.zip