Talsit

They're back!

Works again, don't know why...

Dev/sda1 is still wanting fsck... Without the cache drive things from that share are moving to the array. I used mover on another share with cache drive enabled and didn't have a problem.

That looks like where I was trying to move files from a Windows machine to the array. I'm chasing several problems now. I might have a corrupted disk on my Windows machine, all of the directories that I move files from are now showing as corrupt/unreadable, running chkdsk on them HDDs. I've disabled the cache drive for the affected share and files are going on to the array, or appear to be. (Moving from an alternate location to the array). Once chkdsk finishes, I'll re-enable the cache and see what happens.

I'll check for the line concerning the flash drive this evening. I ran reiserfsck against the cache and all hard drives with no corrective action required. It wouldn't be impossible that the cache drive is failing, I've had that problem before.

That didn't work either. I can manually move files in MC but automatic mover still isn't working from cache to the array. After emptying the cache, I can move files from my Windows machine to the cache drive. I think the next step will be to disable the cache on that share.

I will give that a try. The error has been occurring for a while, I just hadn't noticed because files were building up on the cache drive.

I'm on 5.0.5 Pro with 20TB total space, 11ish TB free. When I try to move files to my array from the cache drive using mover, I'm getting the No Space Left on Device error. When I move them from my Windows machine to the array the move just errors out. I adjusted the split level on the share (Movies) that I know it isn't working on, made the split level 25, disk to most-free, etc and I'm still getting the error. The GUI says I have 300GB free of 500GB on my cache drive and I do have one disk that is 100% full in my array, I've excluded that disk from my Movie share. I've run the new permissions script (though I've been on version 5 since 3TB drives became reasonably priced). The only addon I had running besides the stock WebGUI was CrashPlan, I can't seem to disable the WebGUI but the syslog should be without CrashPlan installed. Any ideas on what to try? syslog.txt

HP PROLIANT DL180 G6 STORAGE SERVER 2 x SIX CORE L5639 8GB RAM $399, sure it isn't 24 bays but if you don't need that much room (this is 14 bay) this might be just what the doctor ordered. It is a server so it might be louder than you want in a frequently used space, reports are that the noise level is only obscene on start up and then it idles back down to desktop noise levels. This would also be a great virtualization platform though I'm not 100% sure on the ability to passthrough the HBA to unRAID.

Thanks, worked like a champ. I have about half locking and half non-locking, he hit 8 of the 10 non-locking, now the home office is locking... Thanks for the replies!

Apparently, my toddler pulled 8 disk out of my unRAID server at some point in the last six days. When I noticed the removable trays askew I logged into the the GUI and all drives showed green and spun down. I think that means there has been no activity on the drives since they got pulled out. What should be my next step, last parity check was six days ago. Reseat drives, start it up and... ? version 5 rc 11 Thanks in advance.

Thanks for the replies. The G2 is about twice the price of the G3 and harder to find I just wanted to confirm that it would work and reading through some of the replies it became quite confusing... Thanks again.

My flash drive has apparently died I'm looking to replace it with an SD card reader and everyone says the MobileLite G2 has its own unique GUID. Does anyone know if the G3 does as well? I would assume it does but was looking for anyone with experience with the reader.

SeaSonic X Series X-850 (SS-850KM Active PFC F3) 850W ATX12V v2.3 / EPS 12V v2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Full Modular Active PFC Power Supply] $109.99 after $20 rebate and code and code EMCXTXM25, ends 10 March 2013.

Thanks for the post! i used stourwalks. http://chunkhost.com/r/Talsit

Really haven't had much luck with this one. I've reinstalled Crashplan, redone permissions, etc, etc... When I watch the boot process it tells me Crashplan is started. This is an improvement, before changing perms it would fail to start. When trying to connect using the GUI from my desktop, it fails to find Crashplan. When I go to the Crashplan directory and request the status of Crashplan (via Putty) it says that Crashplan is stopped. Back to it next weekend I guess. Luckily, Crashplan is the alternate backup plan.

I'll give that a shot. That sounds like what happened since it isn't finding Crashplan.

After I upgraded to RC10 and re-installed my plugins, Crashplan doesn't work anymore. I upgraded from RC8. At the same time, the email notifications plg started sending hourly status updates on the server, I had set that to daily and according to the settings, that is still what it should be doing. This isn't so much a call for help (yet), just trying to see if anyone else has had this issue with Crashplan. Full scale troubleshooting will begin this weekend.

NZXT HALE82 HALE82-750-M 750W ATX12V / EPS12V SLI Certified CrossFire Ready 80 PLUS BRONZE Certified Modular Power Supply Single rail, modular, Seasonic internals. $59.99 after MIR, normally $119.99, best deal besides the Egg is $99.99, Bronze certified rather than Gold, but seems pretty solid based on reviews. 53A on the 12V rail so... 24 green drives, 16 7200's

CORSAIR Enthusiast Series TX750 V2 750W ATX12V v2.31/ EPS12V v2.92 80 PLUS BRONZE Certified Active PFC High Performance Power Supply $69.99 after code EMCNENJ22 and MIR.

I had the same problem using EUFI bios. It would say it the card would enter configuration after initialization then go to the bios on my NICs, back to the system bios and then boot. I CTRL+C'd for the card, then F8'd to configure bios and it opened the card configuration before it opened the bios. Worked for me, YMMV.

RockDog, mine had the same sticker. Right or wrong I used the instructions for the M1015 and SAS2008 chipset. Worked like a champ! I used the P10 download.

Madburg, thanks for a fantastic guide! I got a new pulled M1015 from EBay, plugged it in, attempted to flash, swapped mobo's, flashed, reinstalled, viola! The motherboard in my UNRAID is an Asus P8B WS with the 0805 BIOS, it recognized the card and let me erase it but I got the notorious PAL error when I tried to flash the BIOS. I pulled the card and put it into my desktop machine with an ASUS M4A89GTD PRO/USB3 mobo and it flashed with no issues. I reinstalled the card in my UNRAID machine, upgraded to 5.0B11 and it's doing a parity check at about 120MB/SEC. SBR attached and again, thanks for the outstanding work! IBM_M1015.zip