Talsit

They're back!

Works again, don't know why...

Dev/sda1 is still wanting fsck... Without the cache drive things from that share are moving to the array. I used mover on another share with cache drive enabled and didn't have a problem.

That looks like where I was trying to move files from a Windows machine to the array. I'm chasing several problems now. I might have a corrupted disk on my Windows machine, all of the directories that I move files from are now showing as corrupt/unreadable, running chkdsk on them HDDs. I've disabled the cache drive for the affected share and files are going on to the array, or appear to be. (Moving from an alternate location to the array). Once chkdsk finishes, I'll re-enable the cache and see what happens.

I'll check for the line concerning the flash drive this evening. I ran reiserfsck against the cache and all hard drives with no corrective action required. It wouldn't be impossible that the cache drive is failing, I've had that problem before.

That didn't work either. I can manually move files in MC but automatic mover still isn't working from cache to the array. After emptying the cache, I can move files from my Windows machine to the cache drive. I think the next step will be to disable the cache on that share.

I will give that a try. The error has been occurring for a while, I just hadn't noticed because files were building up on the cache drive.

I'm on 5.0.5 Pro with 20TB total space, 11ish TB free. When I try to move files to my array from the cache drive using mover, I'm getting the No Space Left on Device error. When I move them from my Windows machine to the array the move just errors out. I adjusted the split level on the share (Movies) that I know it isn't working on, made the split level 25, disk to most-free, etc and I'm still getting the error. The GUI says I have 300GB free of 500GB on my cache drive and I do have one disk that is 100% full in my array, I've excluded that disk from my Movie share. I've run the new permissions script (though I've been on version 5 since 3TB drives became reasonably priced). The only addon I had running besides the stock WebGUI was CrashPlan, I can't seem to disable the WebGUI but the syslog should be without CrashPlan installed. Any ideas on what to try? syslog.txt

HP PROLIANT DL180 G6 STORAGE SERVER 2 x SIX CORE L5639 8GB RAM $399, sure it isn't 24 bays but if you don't need that much room (this is 14 bay) this might be just what the doctor ordered. It is a server so it might be louder than you want in a frequently used space, reports are that the noise level is only obscene on start up and then it idles back down to desktop noise levels. This would also be a great virtualization platform though I'm not 100% sure on the ability to passthrough the HBA to unRAID.

Thanks, worked like a champ. I have about half locking and half non-locking, he hit 8 of the 10 non-locking, now the home office is locking... Thanks for the replies!

Apparently, my toddler pulled 8 disk out of my unRAID server at some point in the last six days. When I noticed the removable trays askew I logged into the the GUI and all drives showed green and spun down. I think that means there has been no activity on the drives since they got pulled out. What should be my next step, last parity check was six days ago. Reseat drives, start it up and... ? version 5 rc 11 Thanks in advance.

Thanks for the replies. The G2 is about twice the price of the G3 and harder to find I just wanted to confirm that it would work and reading through some of the replies it became quite confusing... Thanks again.

My flash drive has apparently died I'm looking to replace it with an SD card reader and everyone says the MobileLite G2 has its own unique GUID. Does anyone know if the G3 does as well? I would assume it does but was looking for anyone with experience with the reader.

SeaSonic X Series X-850 (SS-850KM Active PFC F3) 850W ATX12V v2.3 / EPS 12V v2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Full Modular Active PFC Power Supply] $109.99 after $20 rebate and code and code EMCXTXM25, ends 10 March 2013.

Thanks for the post! i used stourwalks. http://chunkhost.com/r/Talsit