-
Posts
16,167 -
Joined
-
Last visited
-
Days Won
65
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by JonathanM
-
-
Have you looked at Spaceinvader One's youtube channel? He has a comprensive list of Unraid videos.
-
The syslog will show the sector number, but there is no way to know which disk is wrong. It's also a very difficult problem to determine which file (or free space) on each disk is being used by that sector.
-
On 5/1/2024 at 3:31 PM, Thunderhead said:
The wifi works in every other aspect but this.
Can you please explain what you mean? The only way to use wifi with Unraid's base OS is to attach a wifi to ethernet bridge and utilize the ethernet port on the Unraid pc.
-
or
-
-
1 hour ago, elibosley said:
Light mode theme should be fixed
That was the first thing I noticed, it wouldn't toggle to the light side.
Working now, but it got me thinking. Do you have statistics on dark vs. light usage? They would be skewed to the dark side, since that's the default, but I'd be curious what the statistics say.
-
7 hours ago, serpro said:
If there are any good guides you could recommend me to follow - that would be appreciated.
Have you discovered Spaceinvader One on youtube yet?
-
1
-
-
Question is, was the shirt sourced from existing wardrobe, or issued as part of the onboarding package from Limetech?
🤣
Welcome, looks like you are fitting in quite well!
-
15 hours ago, Atvaark said:
With Minecraft now using java 21, how do i go about adding it to MineOS again?
Are you able to run 1.20.5 or 1.20.6 after doing this?
-
6 hours ago, docbillnet said:
I am just a few days into my 30 day trials, and I have already decided to purchase. But I am thinking if I wait until the trial expires, then that essentially grants me additional time where I can receive free updates. Now reading this, I'm wondering if I should also do the two 15 day trial extensions before purchasing?
Sure, we want people to be as satisfied as possible before committing. If it's worth your time to extend the trial, go right ahead. That's what the trial extensions are for, to be absolutely positive before you pull the trigger.
-
1
-
-
5 minutes ago, nedpool said:
No, I'm assigning an IP to the container on a dedicated interface.
Port mapping only applies to bridge. All ports are open when you assign an IP. Port changes must be made in the application itself.
-
12 hours ago, HomerJ said:
the power was cutoff to our house. 10 seconds later it all came back on,
A properly set up UPS would have avoided all that drama.
Unraid really doesn't like having the power cut, you are lucky more didn't go wrong.
-
On 4/28/2024 at 9:24 AM, YaSo said:
After the script had run,
How long did that take? Writing zeroes to the entire capacity of the drive and simultaneously updating parity takes a LONG time. Many, many hours.
-
12 hours ago, digity said:
then physically add it to the Unraid server to replace the smaller drives one at a time?
If you are rebuilding the smaller drives to the new ones there is no need for them to be clear. It's only when you add new data slots to an already parity protected array that the disk must be clear.
-
This is a contentious subject, as in normal operation the parity drive is the last to flush writes, meaning it's way more likely for the parity disk to be the one that needs to be changed if there is a sync error. The defaults have been switched back and forth a few times.
Non-correcting is obviously my preference, but the longer a sync error stays around, the greater the chance a failed drive will happen before it's corrected, and have corruption as a result on the rebuilt disk. It's not completely black and white.
-
1
-
-
4 hours ago, Devotee said:
At that point I had a corrupted file in that drive and doing a correcting Parity-Check just made things worse as parity errors were found and "corrected" when, in fact, the parity was fine. Had I done a non-correcting parity check after the second data drive rebuilt and catching the corrupted file might have been solved by just rebuilding the data drive again
This is why automatic parity checks should always be non-correcting. If errors are found, there should be an investigation and a probable cause found before action is taken.
-
1
-
-
3 minutes ago, naddel81 said:
folders are called shares in linux?
Not universally.
In Unraid, the root folders on each disk or pool can be exported as user shares.
I recommend watching spaceinvader one's Unraid videos on youtube, he has a load of very informative content.
-
1
-
-
Short answer, no, each array drive is a single volume using all available space.
Long answer, Unraid is linux based, and the paths are going to be completely different between a windows and linux install of plex.
Disclaimer, I am an emby user, so I don't have first hand experience with this, but here is supposed to be a guide of sorts.
https://support.plex.tv/articles/201370363-move-an-install-to-another-system/
-
1
-
-
55 minutes ago, itimpi said:
That will not allow you to change the scheduling as Unraid is still responsible for starting the checks. However the standard scheduling can handle quarterly.
Yes, but I had a hard time understanding the OP question, it was clear on one part, but the "whenever I add files parity runs" had me questioning what was really intended or desired. I figured more reading would help the OP get where they wanted to go.
-
8 minutes ago, Pjrezai said:
Should I take the CMOS backup battery on the motherboard out as well?
No. This is just a test to see if the motherboard is not resetting properly.
-
The basic storage functions will transfer fine, as long as both the old and new boards pass the drive ID's through identically. The only issue there is hardware RAID or drive enclosures that can modify the ID's.
Any hardware that was passed through directly to VM's or containers will no longer be present and cause errors.
-
1
-
-
2 minutes ago, Pjrezai said:
Or just flipping the switch on the PSU on and off?
Turn PSU off, press power button on tower to drain residual power, turn PSU on, wait a beat to allow the motherboard to wake up, then press the power button.
4 minutes ago, Pjrezai said:Also, since it gets fixed by just taking the USB out and putting it back in, it doesn't have anything to do with the USB itself?
Probably not the USB stick, but the motherboard USB controller.
-
1 hour ago, Pjrezai said:
on reboot it won't give the ability to enter bios (and the screen stays black),
That sounds more like a motherboard issue. If it happens again try a cold boot, actually remove power from the motherboard with a power switch on the PSU or removing the AC supply.
-
1 hour ago, ximian said:
I imagine If I need to reset the unraid as if new, I need to format the flash drive ?
No, the only changes made to the flash would be in the config folder. Replacing that folder with default files and adding your specific key file that belongs with that GUID will reset everything to new.
-
1
-
[Support] Clowrym's Docker Repository
in Docker Containers
Posted
I guess I'll try again, but it wouldn't start my world with the 1.20.6 jar and profile. It acted the same before and after I updated the Java version.