snuffy47

Thanks for all the help much appreciated

Top Shelf that got her mounted. Bit unsure how to check recycle bin of drive though... What should the next step be to ensure all is running as it should

Do I use -L in the options or the command that was in another post on console xfs_repair -vL /dev/md1

Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... Log inconsistent (didn't find previous header) failed to find log head zero_log: cannot find log head/tail (xlog_find_tail=5) ERROR: The log head and/or tail cannot be discovered. Attempt to mount the filesystem to replay the log or use the -L option to destroy the log and attempt a repair. Well it would seem it asked to use -L tower-diagnostics-20230203-1348.zip

Hello, Well it seems I have myself in a pickle. Pretty sure Disk 7 is failing and when I was getting ready to change it out also noticed that Disk 1 is indicating that its unmountable. Did find a post on running a file check in maintenance mode but does not see to work. Phase 1 - find and verify superblock... - block cache size set to 1867992 entries Phase 2 - using internal log - zero log... Log inconsistent (didn't find previous header) failed to find log head zero_log: cannot find log head/tail (xlog_find_tail=5) - scan filesystem freespace and inode maps... sb_fdblocks 111061741, counted 113015432 - found root inode chunk Phase 3 - for each AG... - scan (but don't clear) agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - agno = 8 - agno = 9 - agno = 10 - agno = 11 - agno = 12 - agno = 13 - agno = 14 - agno = 15 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 1 - agno = 0 - agno = 3 - agno = 4 - agno = 5 - agno = 13 - agno = 14 - agno = 10 - agno = 7 - agno = 9 - agno = 8 - agno = 11 - agno = 2 - agno = 6 - agno = 15 - agno = 12 No modify flag set, skipping phase 5 Phase 6 - check inode connectivity... - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - agno = 8 - agno = 9 - agno = 10 - agno = 11 - agno = 12 - agno = 13 - agno = 14 - agno = 15 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify link counts... Maximum metadata LSN (8:394) is ahead of log (0:0). Would format log to cycle 11. No modify flag set, skipping filesystem flush and exiting. XFS_REPAIR Summary Fri Feb 3 13:28:28 2023 Phase Start End Duration Phase 1: 02/03 13:28:23 02/03 13:28:23 Phase 2: 02/03 13:28:23 02/03 13:28:24 1 second Phase 3: 02/03 13:28:24 02/03 13:28:26 2 seconds Phase 4: 02/03 13:28:26 02/03 13:28:26 Phase 5: Skipped Phase 6: 02/03 13:28:26 02/03 13:28:28 2 seconds Phase 7: 02/03 13:28:28 02/03 13:28:28 Total run time: 5 seconds Think I need to cross my fingers and figure out what is going on with Disk 1 before monkeying with Disk 7 tower-diagnostics-20230203-1328.zip

I plan to do something the 8TB and 2TB wasnt sure what but will preclear and see what happens Event: Unraid Parity check Subject: Notice [TOWER] - Parity check finished (0 errors) Description: Duration: 19 hours, 51 minutes, 6 seconds. Average speed: 112.0 MB/s Importance: normal The other 2 with UDMA CRC error count 30 and 21 will monitor Well it was a mess but with your help trurl and the UNRAID community looks like I am back to a healthy status

Well I decided to just replace Disk 2 Everything seems to be good now

Event: Unraid Parity sync / Data rebuild Subject: Notice [TOWER] - Parity sync / Data rebuild finished (0 errors) Description: Duration: 20 hours, 55 minutes, 4 seconds. Average speed: 106.3 MB/s Importance: normal Will try what you suggested for Disk 2 now

Me too 19hrs and we will know The items like the Pending Sector amount is there a Ok - Not ok but change very soon number that I can use to ensure I donnt get intot this agian Or I guess I am really asking when there is orange lines - When do I pull the trigger to replace though will likely be a moving target just looking for a best recommendation - lets say not critical data Not saving baby monkeys here - I do have critical data though hahaha

Disk 1 is rebuilding fingers crossed sad to see the 8TB go bye bye I posted my Disk 2 GUI for thoughts - I have drives now to replace it The other disks in the GUI have no orange lines except 2 with UDMA CRC error count 30 and 21.

Okie Dokie I still have a thumbs down on Disk 1 and before I had the crazy Disk 3 failure we were targeting Disk 2. Attached the display of disk 1. If I was ignoring things in the past need to understand better what I can acknowledge and what I should be proactive about. Alot of the 2GB are older for sure Really appreciate all the help

My bad tower-diagnostics-20210914-2209.zip

Extended test on remaining drives attached D1 tower-smart-20210913-0759.zip D2 tower-smart-20210913-0758.zip D4 tower-smart-20210913-0758.zip D5 tower-smart-20210913-0758.zip D6 tower-smart-20210913-0758.zip D7 tower-smart-20210913-0758.zip D8 tower-smart-20210913-0757.zip

I started that last night but forgot to shut spin down off. Will do an extended test on all remaining drives and post - though it will likely take a day

Well first drive replaced Now I am not sure which one to replace or if I should wait just happy the rebuild went okay tower-diagnostics-20210911-2131.zip