snuffy47

Members
  • Posts

    145
  • Joined

  • Last visited

Everything posted by snuffy47

  1. Fair enough Look at new card Look at updating MB BIOS Monitor Thanks for the help
  2. Howdy Just received this message is there any call for alarm? Running 6.2.4 Your server has issued one or more call traces. This could be caused by a Kernel Issue, Bad Memory, etc. You should post your diagnostics and ask for assistance on the unRaid forums tower-diagnostics-20170207-2157.zip
  3. http://www.dd-wrt.com/phpBB2/viewtopic.php?p=686175 Okay I believe this suggestion has made it so I can see my server with host name and access it with a hostname. Have no idea why though I am still have some trouble with getting my one android box to update it libary. I really want to put a big thanks for all that replied at this point. Think we may say this is solved
  4. smb-extra.conf #Added from UNRAID post 20170128 domain master = yes preferred master = yes os level = 255 include = /etc/samba/unassigned-shares/ST9250320AS_5SW0BDWX.conf The domain master = yes was from another internet suggestion that did not seem to help Should I remove it? Turl I do have that App installed and it tells me Tower is master Hide "dot" files: ApplyDoneArray must be Stopped to change SMB Extras Samba extra configuration: #Added from UNRAID post 20170128 domain master = yes preferred master = yes os level = 255 include = /etc/samba/unassigned-shares/ST9250320AS_5SW0BDWX.conf Workgroup Settings Workgroup: WORKGROUP Local master browser: YES Monitor local master election: DISABLED Current elected master: TOWER is current local master browser I am really stuggling my on android box will not show me the love and connect to my maridb
  5. Did a full shut down and power back up as recomended no fixy My UNRAID server set to be master I am really struggling with this I do not understand how NSLOOKUP works but I can no t pint the hostname. ident.cfg # Generated settings: NAME="Tower" timeZone="America/New_York" COMMENT="Smiths Server" SECURITY="user" WORKGROUP="WORKGROUP" DOMAIN="" DOMAIN_SHORT="" hideDotFiles="no" localMaster="yes" USE_NTP="no" NTP_SERVER1="pool.ntp.org" NTP_SERVER2="" NTP_SERVER3="" DOMAIN_LOGIN="Administrator" DOMAIN_PASSWD="" SYS_MODEL="NA" SYS_ARRAY_SLOTS="24" SYS_CACHE_SLOTS="1" network cfg # Generated settings: IFNAME[0]="br0" BRNAME[0]="br0" BRSTP[0]="no" BRFD[0]="0" BRNICS[0]="eth0" DESCRIPTION[0]="Server Connection" USE_DHCP[0]="no" IPADDR[0]="192.168.1.28" NETMASK[0]="255.255.255.0" GATEWAY="192.168.1.1" DHCP_KEEPRESOLV="yes" DNS_SERVER1="192.168.1.1" DNS_SERVER2="0.0.0.0" DNS_SERVER3="0.0.0.0" MTU[0]="" SYSNICS="1" smb-extra.conf #Added from UNRAID post 20170128 domain master = yes preferred master = yes os level = 255 include = /etc/samba/unassigned-shares/ST9250320AS_5SW0BDWX.conf
  6. Howdy Scratching my head on this and need some guidance My DSL Modem/Router was replaced with a DSL Modem in bridge mode and we just installed a TPLink router For some reason I can no longer access my server smb shares via \\tower or the GUI setup I can how ever access stuff using the IP C:\Users\smiths>nslookup tower Server: DD-WRT Address: 192.168.1.1 Name: tower Address: 192.168.1.28 C:\Users\smiths>nslookup osmc Server: DD-WRT Address: 192.168.1.1 Name: osmc Address: 192.168.1.103 I am unable to ping the hostnames though This has cause some trouble as it somehow affects my access to my shares with my TV to set boxes and I no longer see Tower in Network places of my windows machine not sure why. Need some guidance on this one
  7. Thx for help Server been running great for so long crazy when it breaks
  8. Okay I pulled into and appdata2 and transmission worked I copied the settings.json file into my original appdata and reinstalled back there and it seems to be working What should I do to ensure all is well or was this wrong thnx
  9. 1- I used Community Applications - Previous Apps to reinstall yes 2- Yes my appdata was on my cache. My other dockers seem to be functioning okay after docker nuke and reinstall Diag attached tower-diagnostics-20161029-1116.zip
  10. Had some problems with my cache drive and had to nuke my docker.img Most dockers loaded up great but transmission is giving me 2016-10-28 23:06:20.620] transmission-daemon Error loading config file -- exiting. (daemon.c:693) My settings.json file appears to be empty any help appreciated
  11. Well I went ahead and used the xfs_repair -L /dev/sdb1 The Shares seem to be back but there seems to be some issues with dockers so going to delete docker.img and go from there Few questions though 1. What pointed you to tell me to use the xfs_repair -v /dev/sdb1 command? 2. How do I tell how much data was lost if any using the -L 3. How do i stop this from happening again
  12. Want to make sure I am doing this right 1. Stop Array 2. Check Maintenance Mode 3. Start Array 4. Run Command xfs_repair -v /dev/sdb1 Restart the array and try once more If that doesnt work do the above steps but at step 4 run xfs_repair -L /dev/sdb1
  13. Have attached a diagnostics file For some reason my syslog will not open tower-diagnostics-20161028-0803.zip
  14. Well following this post https://lime-technology.com/forum/index.php?topic=51607.15 I did a scan disk on USB drive -- No errors found I deleted share.cfg and individual .cfg and restarted -- didnt do anything andserver didnt recreate share.cfg. Not sure here if I had to turn shares off and turn them back on . Would like to do this But not sure how to run the Docker Safe New Permissions -- Found this in tools and it did not have any affect on my problem Also just set my cache only shares to use cache drive "no" and received this error Event: Fix Common Problems Subject: Errors have been found with your server. Description: Investigate at Settings / User Utilities / Fix Common Problems Importance: alert **** Default docker appdata location is not a cache-only share **** **** Share appdata set to not use the cache, but files / folders exist on the cache drive **** **** Share downloads set to not use the cache, but files / folders exist on the cache drive **** **** Community Applications not set to auto update **** **** This plugin (Fix Common Problems) not set to auto update **** Kinda freaking out Update Not sure if this helps move in a direction to fix but when I select disk shares to yes they all show up as exportable shares. I can access all five of my disks without a password but when I try to access my cache drive if prompts for a password an will not allow me to access. The cache drive is where all my app data is and docker image
  15. Hello All Just got home from a trip and my spouse mentioned that she could not see movies in Kodi When I logged into the server all the dockers where stopped and in my Shares there where none Running 6.2.1 I believe and server was running Restarted and Rebooted still no Exportable Shares present When I explore the disks in the array I can see the share folders. Also on the flash drive I can find the .cfg files for each share folder
  16. Was thinking of using a Rassberry PI that I have sitting idle to replace the headless version Do I just take the advancesettings.xml and source file from the headless UNRAID docker and plop them in the in Kodi instance?
  17. Roger Dogger in holding pattern And really you haven't fixed it yet hehehehe
  18. Opps been caught a few times being lazy this week my bad again I do not seem to have the addonupdate in my guisettings. Should I add it?
  19. Hello Going through some hicups with my setup and noticed an Error in the log after start up Its repeating every few seconds Oct 1 08:07:30 Tower kernel: kodi.bin[12111]: segfault at 7a8 ip 000055e25a7dc277 sp 00002b5c95e9f750 error 4 in kodi.bin[55e25a060000+201c000] Just wondering if I need to action this or not.
  20. Squid think you got me again Update: Installed new Gbps NIC and disabled onboard NIC Plugged everything back into orginal DLink GB switch and router and poof all is well Still not sure why onboard NIC would work with 100Mbps switch and not the orignal Gbps switch just like that. Not sure if it is actually a V6.2 upgrade bug or not
  21. The switch being used is D-Link DS-1008D Update: I had a Cisco 100Mbs small business switch and swapped out the original D-Link and the Server communicates fine thru it This is making me scratch my head
  22. Not sure if this will help but with the Server conected to the router and working properly on the network the screen is reporting Device "eth1" does not exist. Havent had a screen on this thing for sometime so not sure when that started
  23. In BIOS it tells me that my MAC suppose to be 00:30:18:AA:AD:73 In Network Settings in UNRAID it says it is for ETH0 00:30:18:AA:AD:73
  24. Here is the log with server attached to the router dircectly tower-diagnostics-20160929-1744.zip