lostincable

Members
  • Posts

    66
  • Joined

  • Last visited

Everything posted by lostincable

  1. Just reposting this. Has anyone seen this error my log is full of it, switching to SMB it obviously works fine but with NFS shares setup it doesn't work. libnfs error: NFS: Lookup of /TV/SHOWNAME/.nomedia failed with NFS3ERR_NOENT(-2) Any help appreciated?
  2. Hi everyone, Just bought a new cpu to upgrade my unraid box. ark.intel.com/products/129937/Intel-Core-i5-8600-Processor-9M-Cache-up-to-4_30-GHz But I think my motherboard doesn't support it. www.gigabyte.com/Motherboard/GA-Z170MX-Gaming-5-rev-10 Anyone have any ideas? I think I need a 370 board? If this is the case anyone have any recommendations for a board if I need to change the board out? Thanks everyone....
  3. Getting a bunch of NFS errors on this docker as per the below. Anyone else using NFS shares having the same problem? SMB Is perfectly fine and there is nothing in my unraid syslog about this that would relate. libnfs error: NFS: Lookup of /MEDIA failed with NFS3ERR_NOENT(-2)
  4. Hi everyone just trying out playing hevc files of my unraid box and experience alot of buffering. Tv is a Sony 2018 Android tv and I am run kodi and spmc. The tv is connected via ethernet and the unraid box is hard wired as well. I have played the file directly on a PC not streaming from the unraid box and the file is ok. The drive it's on is a ST31500341AS which is quite old. Is it possible the drive is struggling to keep up and is there any tests you can run on the disk or CPU to see if it's struggling to keep up to eliminate them as the issue ?? Any help appreciated.
  5. Has anyone managed to add a share folder to piwigo? I believe you can symlink the relevant folder to the piwigo picture folder and re sync the album's. Has anyone done this? Or have an alternative photo management software.
  6. I have been using this docker for a while without issue. As of late I am getting the below entry in my sys log. I can't access the WebUi for kodi headless and in the options for the docker the web ui is not listed. Anyone else having this trouble? I have tried latest and krypton branches and also deleted the docker image but still no web ui option and can't access the panel. Any help appreciated. ____________ May 2 16:45:43 Tower kernel: docker0: port 1(vethee14e6e) entered disabled state May 2 16:45:43 Tower kernel: device vethee14e6e left promiscuous mode ____________
  7. Love the plugins thanks for the hard work! One question though any chance of a htpc manager plugin which support sonarr?
  8. Yes that's straightforward so I disconnected all switches connected to the board. It was up for 11 hours, competed a parity check and then had one stream going and I was deleting some files from the sever and it restarted twice in the space kg 5 minutes. I am at a bit of loss but in a last ditch attempt I am running a memtest and will see what happens. Failing that I'll try safe mode. The only thing I noticed was the CPU is quite high and often peaks to 100% when sabnzbd is working Is it possible if the CPU gets high that it would hard reset?
  9. Just to recap on this... Server specs are: Patriot 8GB DDR4 Ram Single Stick Intel BX80662G4400 Gigabyte H110M-H 4 Disks (1 Cache SSD, 1 Parity and 2 Storage drives) Here are the known symptoms: / Things happening 1) Server reboots randomly about every 4 - 10 hours 2) Its a complete hard unsafe reboot as nothing is logged in the syslog about it shutting down it seems to just be literally resetting (I have verified this by storing syslog temporarily on the cache drive) 3) I have swapped CPU, Memory, Motherboard, Power Supply and USB Stick 4) I have also changed the power board and power point the server is plugged into The only things I can think of to move forward and this where I need your help please - 1) Plugins (NOT SURE HOW???) - Currently have Phaze Sab, Sickbeard and Plex and Unassigned Devices, Powerdown Package, Fix Common Problems Dynamic Active Streams and Nerd Tools 2) Disks full (Would this cause a reboot?) - My two disks are 94% and 97% full 3) Bad RAM (Will run memtest tonight!) - RAM seems to be fine and not operating at full capacity 4) CPU Load (Not sure how to test this is there a way to log CPU to cache drive so I can check it?) - CPU Usage seems a bit high as everytime I restart the array it runs a parity check and Sab and Sickbeard kick in. Would CPU being high 90% + cause it to hard reboot for any reason? 5) Faulty reset switch on the case itself?
  10. No pets in the house and no haven't been able to see it happen unfortunately it's very random. No brown out's either the server is connected to a power board and I have swapped that to plus everything else is running fine. I have now removed the server from the power board and have plugged it direct into the wall. Is there a way to run a CPU load / heat test and log this to cache drive? Syslog is completely blank which indicates no hardware issues but I would like to log the state of the system and capture it when it reboots. Does anyone know how to do this?
  11. Ok so its not the power supply or the usb stick or the power cord, I repalced everything and its still rebooting. Nothing in syslog what test can i run like cpu load test or similiar?
  12. Hi everyone, My unraid server every 4 or 5 hours reboots for no reason. I managed to store my syslog on the cache drive temporarily so I could see if anything gets logged in the lead up to the reboot. But there is nothing in the syslog at all the only thing in it is when it reboots again so it seems like its just being hard reset hence the no logging of anything. Could it be the power supply and is there any load test or similar I could do on it? I have just recently replaced the motherboard, CPU and ram but it was doing this before that hence my suspicion on the power supply. Any help / ideas appreciated.
  13. lostincable

    Switch

    Hey all, I have been running unraid for a long time and know getting the house hard wired for ethernet as I am sick of cable rolling around the house and buffering 1080p over wireless. We are getting around 3 -4 hard wired ethernet outlets in each of our rooms all of which are being wired back to a 24 port patch panel in a 6RU cabinet. I am looking for some recommendations for the following - 1) A decent quality switch. Don't want to spend a fortune but also don't want junk. Its going in a 6RU cabinet? 2) For the standard home setup will have the unraid server + all home devices connected to the one switch degrade performance both internally and externally to the LAN? Any help appreciated!
  14. Hi all, I have had to move my unraid box and a windows machine from my office whilst it is renovated. There is no way I can get ethernet cables into the room I have both these boxes in now and it is only temporary. With the windows box I have a wireless dongle which is picking up internet wirelessely obviously the unraid box can not accept a wireless dongle as it doesn't have the drivers for it. What I wanted to know if there is a way to connect my Unraid box to the windows box via ethernet and use Internet Connection Sharing to give the unraid box internet access and if so what ip's etc would need to be assigned to do this? To summarise - PC 1 - Windows 7 Wireless dongle providing internet connection Ethernet port connected to the unraid machine PC 2 - Unraid Server Ethernet cable connected to the windows machine Any help appreciated....
  15. Just bumping this thread up... Been offline for a while and have had the server switched of. I have the server back on now but this problem exists. Any ideas or is the data well and truly gone? Thanks!
  16. No go on the rebuild tree ! ************************************************************* ** If you are using the latest reiserfsprogs and it fails ** ** please email bug reports to [email protected], ** ** providing as much information as possible -- your ** ** hardware, kernel, patches, settings, all reiserfsck ** ** messages (including version), the reiserfsck logfile, ** ** check the syslog file for any related information. ** ** If you would like advice on using this program, support ** ** is available for $25 at www.namesys.com/support.html. ** ************************************************************* Will check consistency of the filesystem on /dev/md1 and will fix what can be fixed without --rebuild-tree Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes ########### reiserfsck --fix-fixable started at Thu Dec 13 10:51:59 2012 ########### Replaying journal: Done. Reiserfs journal '/dev/md1' in blocks [18..8211]: 0 transactions replayed Checking internal tree.. Bad root block 0. (--rebuild-tree did not complete) Aborted
  17. Not looking good I removed the drive and parity simulated the disk but it shows up as unformatted (this is to be expected) So I ran the reiserfsck command reiserfsck --rebuild-tree /dev/md1 And this is the response - reiserfsck --rebuild-tree started at Tue Dec 11 17:21:06 2012 ########### Pass 0: ####### Pass 0 ####### Loading on-disk bitmap .. ok, 486978519 blocks marked used Skipping 23115 blocks (super block, journal, bitmaps) 486955404 blocks will be read 0%block 8867145: The number of items (47) is incorrect, should be (1) - corrected block 8867145: The free space (816) is incorrect, should be (0) - corrected left 478001968, 23499 /sec The problem has occurred looks like a hardware problem. If you have bad blocks, we advise you to get a new hard drive, because once you get one bad block that the disk drive internals cannot hide from your sight,the chances of getting more are generally said to become much higher (precise statistics are unknown to us), and this disk drive is probably not expensive enough for you to you to risk your time and data on it. If you don't want to follow that follow that advice then if you have just a few bad blocks, try writing to the bad blocks and see if the drive remaps the bad blocks (that means it takes a block it has in reserve and allocates it for use for of that block number). If it cannot remap the block, use badblock option (-B) with reiserfs utils to handle this block correctly. bread: Cannot read the block (9112578): (Input/output error). Aborted Looks like I may have lost my data?
  18. Ok thanks again to summarise.... 1) Power down server 2) Disconnect drive power 3) Re power server with drive disconnected 4) Check if drive is being simulated by parity 5) If drive is being simulated by parity run the reiserfsck with rebuild tree and hopefully it completes 6) Shut down server, reconnect drive and power back up Whilst all this is going on plug the disk into windows and see if Yareg or something else can read the disk. Ill give this a shot shortly and thanks again for following this through!
  19. Thanks for the continued help. I tried that and it failed again see the attached screen shot..... I am guessing the hard drive is not happy? Whilst working on this issue is it safe to have the mover moving stuff to the array? I am worried whilst I am working on this issue for the last few days when new files are added to the server it could have a negative affect to the possibility of rebuilding the drive with parity? Is it also possible to plug this into windows and try to rescue the data that way?
  20. Okay tried that and got this - ########### reiserfsck --check started at Tue Dec 11 09:11:31 2012 ########### Replaying journal: Done. Reiserfs journal '/dev/md1' in blocks [18..8211]: 0 transactions replayed Checking internal tree.. Bad root block 0. (--rebuild-tree did not complete) Aborted Should I try the --rebuild-tree option again or it stuffed ?
  21. Tried rebooting and the disks comes up as unformatted Syslog attached these are the filtered errors - Dec 11 04:53:05 Peanut kernel: ata3.00: HPA detected: current 488395055, native 488397168 (Errors) Dec 11 04:53:06 Peanut emhttp: disk1 mount error: 32 (Errors) Dec 11 04:53:06 Peanut kernel: REISERFS error (device md1): vs-5150 search_by_key: invalid format found in block 0. Fsck? (Errors) Dec 11 04:53:06 Peanut kernel: REISERFS error (device md1): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [1 2 0x0 SD] (Errors) Dec 11 04:53:28 Peanut sshd[3085]: error: Could not get shadow information for root (Errors) And when you try and manually mount the disk you get - mount: mount point /mnt/disk1 does not exist Any ideas? syslog-2012-12-11.txt
  22. Thanks for getting back to me I ran the command as suggested. This is the output I get - root@XXXXX:~#dd if=/dev/sdc count=195 | od -c -A d | sed 30q 195+0 records in 195+0 records out 99840 bytes (100 kB) copied, 8.37546 s, 11.9 kB/s 0000000 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 * 0000448 \0 \0 203 \0 \0 \0 ? \0 \0 \0 q 210 340 350 \0 \0 0000464 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 * 0000496 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 U 252 0000512 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 * 0097792 016 021 034 035 016 021 034 035 \0 \0 \0 \0 022 \0 \0 \0 0097808 \0 \0 \0 \0 \0 \0 \0 \0 004 \0 \0 241 333 8 q 0097824 204 003 \0 \0 036 \0 \0 \0 \0 \0 \0 \0 \0 020 314 003 0097840 R 002 002 \0 R e I s E r 2 F s \0 002 \0 0097856 003 \0 \0 \0 377 377 9 : 002 \0 \0 \0 6 325 \a \0 0097872 001 \0 \0 \0 323 355 \a 024 336 274 G 232 231 z 307 Q 0097888 R X 263 240 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 0097904 \0 \0 \0 \0 005 \0 036 \0 232 025 274 P \0 N 355 \0 0097920 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 * 0097984 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 001 \0 \0 \0 0098000 376 031 \0 \0 \0 032 \0 \0 005 032 \0 \0 006 032 \0 \0 0098016 317 033 \0 \0 321 033 \0 \0 322 033 \0 \0 323 033 \0 \0 0098032 325 033 \0 \0 354 033 \0 \0 355 033 \0 \0 361 033 \0 \0 0098048 362 033 \0 \0 371 033 \0 \0 372 033 \0 \0 373 033 \0 \0 0098064 374 033 \0 \0 375 033 \0 \0 376 033 \0 \0 024 034 \0 \0 0098080 027 034 \0 \0 034 \0 \0 ! 034 \0 \0 ' 034 \0 \0 0098096 ( 034 \0 \0 ) 034 \0 \0 * 034 \0 \0 = 034 \0 \0 0098112 ? 034 \0 \0 E 034 \0 \0 F 034 \0 \0 T 034 \0 \0 0098128 U 034 \0 \0 \ 034 \0 \0 ] 034 \0 \0 y 034 \0 \0 0098144 z 034 \0 \0 215 034 \0 \0 216 034 \0 \0 263 034 \0 \0 0098160 264 034 \0 \0 362 034 \0 \0 364 034 \0 \0 032 035 \0 \0
  23. Thanks for the help again it is appreciated! Just had a look - Partition format: MBR: unaligned Any ideas? If the data is lost then I would like to move on but if there is any way of retrieving any files from it I would like to try!
  24. Thanks.... Unfortunately I cannot remember how it was formatted I used pre clear but I have another drive which is the parity drive that is exactly the same as the one I am having issues with is there a way to check this one for how it is formatted or does parity not have a file system or such? This is a summary of what happened - 1) Disk was mounted as "Read Only" 2) As per instructions on the wiki tried to check the disk for errors reiserfsck --check /dev/md1 3) Suggested to run rebuild tree option reiserfsck --rebuild-tree /dev/md1 4) Rebuild tree option failed with the first mentioned errors at the top of the post 5) Server was rebooted 6) Disk is showing as "Unformatted" obviously because of the "rebuild tree" failed I have looked at the sys log since the reboot and its pretty much empty but when I try and remount the disk with the wiki instructions I get this. Using username "root". Linux 2.6.32.9-unRAID. root@...:~# mount /dev/md1 /mnt/disk1 mount: mount point /mnt/disk1 does not exist root@....:~# So any ideas on how to proceed? Cheers!
  25. Okay thanks for the help it makes sense!! In dgaschk's instructions it is mentioned I should save as much data of the disk as possible prior to following the instructions provided.