kenmaglio

Hey Beers, how big is your library? So what I found with this - is you have to configure and start with this from a clean image - you cannot change anything at all after install, so you have to get it 100% right off the bat. Also - my plex is in HOST mode not Bridge. I will say because my library is so large, I can't use this because it doesn't paginate ( break in to pages ) with large libraries.

I'm was having the same issue as many others, I changed the path in unraid from frontend to config - and still nothing. Then I deleted the entire app.. and during INSTALL of the application, i had to change the "frontend" to "config" - you cannot change it after the fact!! Hope this helps someone else!

I have more recently run into an very odd issue. Unraid's web gui will become unresponsive, however if I wait a minute or two, it will load. I get about 30seconds to 1min of use, then times out. Docker's won't update (timeout) sometimes - if I can get it to happen quickly. Have CrushFTP - timeouts trying to connect sometimes, again if it's in that working period it's okay. Attached diag's I don't know if I need to rebuild and start everything from scratch. But it's a real pain right now. unraid-diagnostics-20210708-0121.zip

Just to try, I deleted everything. and now installed the older tag: jasonbean/guacamole:0.9.14-4 Now that it installed correctly... I can login. unraid_docker_log.txt Then I went back in and removed tag... unraid_docker_log_upgrade.txt And... can still login with default 'guacadmin' It looks like something with the 1.0.0 release isn't building the image okay, rather the database.

Having issues getting this working with Unraid. I have simply used the Community Apps ( plugin ) to find and install the docker image. I have included the configuration, command, and catalina.out I get the UI to open, however 'guacadmin' does not work and any attempt is met with 'invalid login' unraid_docker_command.txt unraid_docker_xml.txt catalina.out unraid_docker_log.txt

Anyone that can help, would be appreciated. I have a disk, which I want to reformat and use as a second parity disk. However, any attempt to format through Unraid doesn't work. I use the unassigned devices plugin and tried to mount the disk with the following log, just repeating indefinitely. Aug 3 20:38:23 Unraid kernel: ata20: SATA max UDMA/133 abar m2048@0xfe810000 port 0xfe810280 irq 40 Aug 3 20:38:23 Unraid kernel: ata20: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 3 20:38:23 Unraid kernel: ata20.00: NCQ Send/Recv Log not supported Aug 3 20:38:23 Unraid kernel: ata20.00: ATA-9: ST5000DM000-1FK178, W4J0RD50, CC48, max UDMA/133 Aug 3 20:38:23 Unraid kernel: ata20.00: 9767541168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA Aug 3 20:38:23 Unraid kernel: ata20.00: NCQ Send/Recv Log not supported Aug 3 20:38:23 Unraid kernel: ata20.00: configured for UDMA/133 Aug 3 20:38:23 Unraid kernel: sd 20:0:0:0: [sdo] 9767541168 512-byte logical blocks: (5.00 TB/4.55 TiB) Aug 3 20:38:23 Unraid kernel: sd 20:0:0:0: [sdo] 4096-byte physical blocks Aug 3 20:38:23 Unraid kernel: sd 20:0:0:0: [sdo] Write Protect is off Aug 3 20:38:23 Unraid kernel: sd 20:0:0:0: [sdo] Mode Sense: 00 3a 00 00 Aug 3 20:38:23 Unraid kernel: sd 20:0:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Aug 3 20:38:23 Unraid kernel: sdo: sdo1 Aug 3 20:38:23 Unraid kernel: sd 20:0:0:0: [sdo] Attached SCSI disk Aug 3 20:38:35 Unraid emhttpd: ST5000DM000-1FK178_W4J0RD50 (sdo) 512 9767541168 Aug 3 20:38:35 Unraid kernel: mdcmd (30): import 29 sdo 64 4883770532 0 ST5000DM000-1FK178_W4J0RD50 Aug 3 20:38:35 Unraid kernel: md: import disk29: (sdo) ST5000DM000-1FK178_W4J0RD50 size: 4883770532 Aug 3 20:38:39 Unraid emhttpd: shcmd (47): /usr/local/sbin/set_ncq sdo 1 Aug 3 20:38:39 Unraid root: set_ncq: setting sdo queue_depth to 1 Aug 3 20:38:39 Unraid emhttpd: shcmd (48): echo 128 > /sys/block/sdo/queue/nr_requests Aug 3 20:38:40 Unraid emhttpd: writing GPT on disk (sdo), with partition 1 byte offset 32K, erased: 0 Aug 3 20:38:40 Unraid emhttpd: shcmd (50): sgdisk -Z /dev/sdo Aug 3 20:39:11 Unraid kernel: ata20.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Aug 3 20:39:11 Unraid kernel: ata20.00: failed command: READ DMA EXT Aug 3 20:39:11 Unraid kernel: ata20.00: cmd 25/00:20:88:d9:30/00:00:46:02:00/e0 tag 11 dma 16384 in Aug 3 20:39:11 Unraid kernel: ata20.00: status: { DRDY } Aug 3 20:39:11 Unraid kernel: ata20: hard resetting link Aug 3 20:39:11 Unraid kernel: ata20: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 3 20:39:11 Unraid kernel: ata20.00: NCQ Send/Recv Log not supported Aug 3 20:39:11 Unraid kernel: ata20.00: NCQ Send/Recv Log not supported Aug 3 20:39:11 Unraid kernel: ata20.00: configured for UDMA/133 Aug 3 20:39:11 Unraid kernel: ata20.00: device reported invalid CHS sector 0 Aug 3 20:39:11 Unraid kernel: ata20: EH complete Aug 3 20:39:11 Unraid kernel: sdo: sdo1 Aug 3 20:39:42 Unraid kernel: ata20.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Aug 3 20:39:42 Unraid kernel: ata20.00: failed command: WRITE DMA Aug 3 20:39:42 Unraid kernel: ata20.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 8 dma 20480 out Aug 3 20:39:42 Unraid kernel: ata20.00: status: { DRDY } Aug 3 20:39:42 Unraid kernel: ata20: hard resetting link Aug 3 20:39:42 Unraid kernel: ata20: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 3 20:39:42 Unraid kernel: ata20.00: NCQ Send/Recv Log not supported Aug 3 20:39:43 Unraid kernel: ata20.00: NCQ Send/Recv Log not supported Aug 3 20:39:43 Unraid kernel: ata20.00: configured for UDMA/133 Aug 3 20:39:43 Unraid kernel: ata20.00: device reported invalid CHS sector 0 Aug 3 20:39:43 Unraid kernel: ata20: EH complete Aug 3 20:40:14 Unraid kernel: ata20.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Aug 3 20:40:14 Unraid kernel: ata20.00: failed command: WRITE DMA Aug 3 20:40:14 Unraid kernel: ata20.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 9 dma 20480 out Aug 3 20:40:14 Unraid kernel: ata20.00: status: { DRDY } Aug 3 20:40:14 Unraid kernel: ata20: hard resetting link Aug 3 20:40:14 Unraid kernel: ata20: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 3 20:40:14 Unraid kernel: ata20.00: NCQ Send/Recv Log not supported Aug 3 20:40:15 Unraid kernel: ata20.00: NCQ Send/Recv Log not supported Aug 3 20:40:15 Unraid kernel: ata20.00: configured for UDMA/133 Aug 3 20:40:15 Unraid kernel: ata20.00: device reported invalid CHS sector 0 Aug 3 20:40:15 Unraid kernel: ata20: EH complete Aug 3 20:40:46 Unraid kernel: ata20: limiting SATA link speed to 3.0 Gbps Aug 3 20:40:46 Unraid kernel: ata20.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Aug 3 20:40:46 Unraid kernel: ata20.00: failed command: WRITE DMA Aug 3 20:40:46 Unraid kernel: ata20.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 10 dma 20480 out Aug 3 20:40:46 Unraid kernel: ata20.00: status: { DRDY } Aug 3 20:40:46 Unraid kernel: ata20: hard resetting link Aug 3 20:40:46 Unraid kernel: ata20: SATA link up 6.0 Gbps (SStatus 133 SControl 320) Aug 3 20:40:46 Unraid kernel: ata20.00: NCQ Send/Recv Log not supported Aug 3 20:40:46 Unraid kernel: ata20.00: NCQ Send/Recv Log not supported Aug 3 20:40:46 Unraid kernel: ata20.00: configured for UDMA/133 Aug 3 20:40:46 Unraid kernel: ata20.00: device reported invalid CHS sector 0 Aug 3 20:40:46 Unraid kernel: ata20: EH complete

#thumbsup

Any update on this - being able to have encryption - or being able to roll our own would be great.