ksculland

Members
  • Posts

    45
  • Joined

  • Last visited

Everything posted by ksculland

  1. Thanks, that takes this system out of the running. will focus on system #2
  2. I'm trying to make a basic NAS for a friend. They have two old systems to choose from. This is system 2 Intel Celeron J1900 2GHz 8GB ram I get one of two issues either I get a blinking cursor on boot with one USB stick or I get the loading screen with the options, but no matter which option I select, it just reboots the system
  3. I'm trying to make a basic NAS for a friend. They have two old systems to choose from. This is system 1. AMD Athlon 64 X2 Dual Core 4200+ 1024 MB Ram After doing a bios update I can boot from a USB stick. Now now matter what option I try, I get stuck here. Any suggestions.??? I have tried different USB sticks. same issue. (Will post about the System two in another post, different issues with it)
  4. could you post a pic as well like this?
  5. Need more information. Can you see it in the bios? Do you have Unassigned Devices installed? Motherboard model? NVMe model?
  6. i'm using a cheap Renesas Technology Corp. uPD720201 USB 3.0 Host Controller | USB controller like this https://www.amazon.ca/Sedna-Express-Adapter-uPD720202-Connector/dp/B00PERIIEE If I find my shipping invoice I'll update with exact.
  7. Thanks for the suggestion, but still have same issue. Did I do it correctly?
  8. Cannot get the webUI to display http://192.168.1.40:8097/#/client/c/Boinc Is there anything I do? Anything need be done on my router to allow this to work?
  9. Issue Solved!!! The issue seemed to be with the amd on board sata controller, as only the drives connector to it would have errors during the parity check which didn't happen before and I have had this system since 2018 ish. I did try unplugging the connectors and putting new ones in. Same issue. The parity issue only started happening after I was on UnRaid 6.8.3 so I restored the old version 6.8.2 Went to tools => new config carefully ensured all drives where in the correct slots (serial numbers and disk slot number) and was able to add each back to the array one at a time, with ZERO erros ! Steps I followed for new config as I wanted to remove the two new data drive and add each drive back one at a time. https://wiki.unraid.net/index.php/Shrink_array Make sure that the drive or drives you are removing have been removed from any inclusions or exclusions for all shares, including in the global share settings. Shares should be changed from the default of "All" to "Include". This include list should contain only the drives that will be retained. Make sure you have a copy of your array assignments, especially the parity drive. You may need this list if the "Retain current configuration" option doesn't work correctly Stop the array (if it is started) Go to Tools then New Config Click on the Retain current configuration box (says None at first), click on the box for All, then click on close Click on the box for Yes I want to do this, then click Apply then Done Return to the Main page, and check all assignments. If any are missing, correct them. Unassign the drive(s) you are removing. Double check all of the assignments, especially the parity drive(s)! Do not click the check box for Parity is already valid; make sure it is NOT checked; parity is not valid now and won't be until the parity build completes Start the array; system is usable now, but it will take a long time rebuilding parity Attached Image for things now working!!!
  10. Ok, weird that it would be an issue only now aftyer all this time. I also have many VMs on this system. Are you suggesting I temperately disable the IOMMU to get my new hard drive configuration to pass the 1st parity check, then turn back on? Or are you suggesting I turn it off permanently and not run VMs?
  11. Back story: I just upgraded my parity drives from 3tb to 4tb Then added the 2 old parity 3 tb drives as data drive to the array. Since then I have not been able to pass a parity check. Greatly appreciate any suggestions unraid-diagnostics-20200314-0940.zip
  12. Has anyone been able to find a way to either get MSI MysticLight and Unraid working in a windows 10 vm or have a way of setting it in UnRaid? I tried to install it in Windows 10 and it of course doesn't work in my VM. Does anyone have any suggestions, Thanks
  13. 1022:1457, IOMMU group 30:[1022:1457] , I believe is the on-board audio.
  14. I have manage to get everything I want to work with my setup except on board audio passthrough. Has anyone been able to do it? ASC overide enabled. Am I missing something? append vfio-pci.ids=144d:a808,1022:43ba,1b21:2142,1022:1457,8086:2526 pcie_acs_override=multifunction isolcpus=3-15,19-31 initrd=/bzroot,/bzroot-gui IOMMU group 0:[1022:1452] 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge IOMMU group 1:[1022:1453] 00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge IOMMU group 2:[1022:1453] 00:01.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge IOMMU group 3:[1022:1452] 00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge IOMMU group 4:[1022:1452] 00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge IOMMU group 5:[1022:1452] 00:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge IOMMU group 6:[1022:1452] 00:07.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge IOMMU group 7:[1022:1454] 00:07.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B IOMMU group 8:[1022:1452] 00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge IOMMU group 9:[1022:1454] 00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B IOMMU group 10:[1022:790b] 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 59) [1022:790e] 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51) IOMMU group 11:[1022:1460] 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 0 [1022:1461] 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 1 [1022:1462] 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 2 [1022:1463] 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 3 [1022:1464] 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 4 [1022:1465] 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 5 [1022:1466] 00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 6 [1022:1467] 00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 7 IOMMU group 12:[1022:1460] 00:19.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 0 [1022:1461] 00:19.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 1 [1022:1462] 00:19.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 2 [1022:1463] 00:19.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 3 [1022:1464] 00:19.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 4 [1022:1465] 00:19.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 5 [1022:1466] 00:19.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 6 [1022:1467] 00:19.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 7 IOMMU group 13:[1022:43ba] 01:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] X399 Series Chipset USB 3.1 xHCI Controller (rev 02) IOMMU group 14:[1022:43b6] 01:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] X399 Series Chipset SATA Controller (rev 02) IOMMU group 15:[1022:43b1] 01:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] X399 Series Chipset PCIe Bridge (rev 02) IOMMU group 16:[1022:43b4] 02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) [1b21:2142] 03:00.0 USB controller: ASMedia Technology Inc. ASM2142 USB 3.1 Host Controller IOMMU group 17:[1022:43b4] 02:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) [1b4b:9215] 04:00.0 SATA controller: Marvell Technology Group Ltd. Device 9215 (rev 11) IOMMU group 18:[1022:43b4] 02:03.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) [8086:2526] 05:00.0 Network controller: Intel Corporation Wireless-AC 9260 (rev 29) IOMMU group 19:[1022:43b4] 02:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) IOMMU group 20:[1022:43b4] 02:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) IOMMU group 21:[1022:43b4] 02:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) [8086:1539] 08:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03) IOMMU group 22:[1022:43b4] 02:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) [8086:1539] 09:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03) IOMMU group 23:[1002:67df] 0a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] (rev c7) IOMMU group 24:[1002:aaf0] 0a:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] IOMMU group 25:[1022:145a] 0b:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Zeppelin/Raven/Raven2 PCIe Dummy Function IOMMU group 26:[1022:1456] 0b:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Platform Security Processor IOMMU group 27:[1022:145f] 0b:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] USB 3.0 Host controller IOMMU group 28:[1022:1455] 0c:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Zeppelin/Renoir PCIe Dummy Function IOMMU group 29:[1022:7901] 0c:00.2 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51) IOMMU group 30:[1022:1457] 0c:00.3 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller IOMMU group 31:[1022:1452] 40:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge IOMMU group 32:[1022:1453] 40:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge IOMMU group 33:[1022:1452] 40:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge IOMMU group 34:[1022:1452] 40:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge IOMMU group 35:[1022:1453] 40:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge IOMMU group 36:[1022:1452] 40:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge IOMMU group 37:[1022:1452] 40:07.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge IOMMU group 38:[1022:1454] 40:07.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B IOMMU group 39:[1022:1452] 40:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge IOMMU group 40:[1022:1454] 40:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B IOMMU group 41:[144d:a808] 41:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981 IOMMU group 42:[10de:104a] 42:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) IOMMU group 43:[10de:0e08] 42:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1) IOMMU group 44:[1022:145a] 43:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Zeppelin/Raven/Raven2 PCIe Dummy Function IOMMU group 45:[1022:1456] 43:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Platform Security Processor IOMMU group 46:[1022:145f] 43:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] USB 3.0 Host controller IOMMU group 47:[1022:1455] 44:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Zeppelin/Renoir PCIe Dummy Function IOMMU group 48:[1022:7901] 44:00.2 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51) CPU Thread Pairings Pair 1:cpu 0 / cpu 16 Pair 2:cpu 1 / cpu 17 Pair 3:cpu 2 / cpu 18 Pair 4:cpu 3 / cpu 19 Pair 5:cpu 4 / cpu 20 Pair 6:cpu 5 / cpu 21 Pair 7:cpu 6 / cpu 22 Pair 8:cpu 7 / cpu 23 Pair 9:cpu 8 / cpu 24 Pair 10:cpu 9 / cpu 25 Pair 11:cpu 10 / cpu 26 Pair 12:cpu 11 / cpu 27 Pair 13:cpu 12 / cpu 28 Pair 14:cpu 13 / cpu 29 Pair 15:cpu 14 / cpu 30 Pair 16:cpu 15 / cpu 31 USB Devices Bus 001 Device 001:ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002:ID 046d:c337 Logitech, Inc. Bus 001 Device 003:ID 046d:c539 Logitech, Inc. Bus 002 Device 001:ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001:ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002:ID 0461:4de2 Primax Electronics, Ltd Bus 003 Device 003:ID 051d:0002 American Power Conversion Uninterruptible Power Supply Bus 004 Device 001:ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 002:ID 0951:1666 Kingston Technology DataTraveler 100 G3/G4/SE9 G2 SCSI Devices [0:0:0:0]disk Kingston DataTraveler 3.0 /dev/sda 15.4GB [1:0:0:0]disk ATA Samsung SSD 850 2B6Q /dev/sdb 250GB [2:0:0:0]disk ATA Samsung SSD 850 3B6Q /dev/sdc 250GB [3:0:0:0]disk ATA WDC WD30EFRX-68N 0A82 /dev/sdd 3.00TB [4:0:0:0]disk ATA WDC WD30EFRX-68E 0A82 /dev/sde 3.00TB [5:0:0:0]disk ATA WDC WD30EFRX-68E 0A82 /dev/sdf 3.00TB [6:0:0:0]disk ATA WDC WD30EFRX-68E 0A82 /dev/sdg 3.00TB [7:0:0:0]disk ATA WDC WD30EFRX-68N 0A82 /dev/sdh 3.00TB [8:0:0:0]disk ATA WDC WD30EFRX-68E 0A82 /dev/sdi 3.00TB [10:0:0:0]disk ATA WDC WD20EADS-11R 0A80 /dev/sdj 2.00TB [11:0:0:0]disk ATA WDC WD20EARX-00P AB51 /dev/sdk 2.00TB
  15. https://www.reddit.com/r/unRAID/comments/49isga/optical_drive_passthrough/ I found this reddit post. So the answer is edit you windows VM xml, find where it says <devices> then insert the xml from below: <controller type='scsi' index='0' model='virtio-scsi'/> <hostdev mode='subsystem' type='scsi'> <source> <adapter name='scsi_host5'/> <address type='scsi' bus='0' target='0' unit='0'/> </source> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </hostdev> SCSI Devices (found under Tools => System Devices)[9:0:0:0] cd/dvd HL-DT-ST DVDRAM GH22NS50 TN03 /dev/sr0 Since my cdrom is listed as [9:0:0:0] scsi_host5 needs to be change to scsi_host9 Then save and launch your vm. Go to device manager, you should now have a new device, SCSI Controller, update its driver by pointing it to the virtio-win. Once completed, your cdrom device will now be usable.
  16. I'm trying to have a windows vm as my daily driver. I can't find the video or forum link I found months ago that showed how to add a cdrom by editing the xml ( or by any other simple way). IOMMU group 26: [1b4b:9172] 09:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11) SCSI Devices [9:0:0:0] cd/dvd HL-DT-ST DVDRAM GH22NS50 TN03 /dev/sr0 I have the drive connected with a sata pcie 4 port card and is listed as a scsi device. Can someone please advise me of the next steps Thanks
  17. If my board doesn't support this feature, then that information is helpful.
  18. I have read there maybe a bios setting on the google, any thoughts to what it would be call and maybe located in the bios on my gigabyte: GA-890GPA-UD3H board #NotAnAsusMotherboard.
  19. I check my system info: IOMMU is disabled, and from what I have read, this need to be enabled to allow this function. Motherboard:Gigabyte Technology Co., Ltd. - GA-890GPA-UD3H CPU: AMD Phenom™ II X6 1090T @ 3200 How do I enable this feature?
  20. /mnt/cache/VMs/libvirt.img Done. Now works Thanks.
  21. There no longer is an image to select. How do I create a new libvirt.img?