Trynn

Hey, i needed to change my Mainboard / Stick and unfortunatley, couldn't get a new board with enough sata ports. So i've opted to use an ASM1064 Extension Card. It's a 7 drive (2 Parity) Setup. (Ziyituod 4-Port SATA-Karte, PCIe 3.0 zu SATA – Non-RAID, Systemstartfähig – Plug & Play – (ASM1064-Chipsatz)) The system runs now for 2 weeks again without problems, but due to higher power usage i wanted to optimize my system a bit. Using powertop --auto-tune does fix a lot of "Tunables" in my system from Bad to Good. But it seems, this is a major issue for the extension card. I've done this twice now, and without any load (overnight) the drives connected to the card get to a "disabled" state. Forcine me to rebuild. I've three drives connected to this card. (Both Partitys and one Datadrive) Last night, /dev/sdh failed. (HGST_HUS728T8TALN6L4_VDGG474D) Is in rebuild progress now again. Does not make me feel comfortable, knowning that there are 3 drives connected and potentially all three could get to this disabled state doing so :) As i said, without auto-tune it did work for 2 weeks. Activating auto-tune, resulted in this issue within 24hour twice now. This is the Tuneables Output without Auto-Tune. Bad Enable SATA link power management for host12 Bad Enable SATA link power management for host13 Bad Enable SATA link power management for host14 Bad Enable SATA link power management for host15 Bad Enable SATA link power management for host3 Bad Enable SATA link power management for host5 Bad Enable SATA link power management for host7 Bad Enable SATA link power management for host11 Bad Enable SATA link power management for host9 Bad Enable SATA link power management for host18 Bad Enable SATA link power management for host1 Bad Enable SATA link power management for host23 Bad VM writeback timeout Bad Enable SATA link power management for host16 Bad Enable SATA link power management for host17 Bad Enable SATA link power management for host10 Bad Enable SATA link power management for host19 Bad Enable SATA link power management for host21 Bad Enable SATA link power management for host22 Bad Enable SATA link power management for host28 Bad Enable SATA link power management for host26 Bad Enable SATA link power management for host20 Bad Enable SATA link power management for host29 Bad Enable SATA link power management for host8 Bad Enable SATA link power management for host27 Bad Enable SATA link power management for host2 Bad Enable SATA link power management for host4 Bad Enable SATA link power management for host6 Bad Enable SATA link power management for host24 Bad Enable SATA link power management for host25 Bad Enable SATA link power management for host30 Bad Autosuspend for USB device Flash Drive FIT [Samsung] Bad Autosuspend for USB device Back-UPS XS 650CI FW:892.R3 .I USB FW:R3 [American Power Conversion] Bad Autosuspend for USB device ITE Device [ITE Tech. Inc.] Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge Bad Runtime PM for port ata18 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata19 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata14 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata15 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for disk sdc Bad Runtime PM for disk sdh Bad Runtime PM for disk sdf Bad Runtime PM for disk sdg Bad Runtime PM for disk sde Bad Runtime PM for disk sdb Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge Bad Runtime PM for disk sdd Bad Runtime PM for disk sda Bad Runtime PM for port ata30 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 7 Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 5 Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge Bad Runtime PM for PCI Device Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983 Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Function Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] 500 Series Chipset USB 3.1 XHCI Controller Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 1 Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 3 Bad Runtime PM for port ata16 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata5 of PCI device: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset SATA Controller Bad Runtime PM for port ata6 of PCI device: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset SATA Controller Bad Runtime PM for port ata3 of PCI device: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset SATA Controller Bad Runtime PM for port ata4 of PCI device: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset SATA Controller Bad Runtime PM for port ata1 of PCI device: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset SATA Controller Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] 500 Series Chipset SATA Controller Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 2 Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge Bad Runtime PM for PCI Device Realtek Semiconductor Co., Ltd. RTL8852CE PCIe 802.11ax Wireless Network Controller Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Starship/Matisse Cryptographic Coprocessor PSPCPP Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 4 Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Starship/Matisse Root Complex Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 6 Bad Runtime PM for PCI Device Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller Bad Runtime PM for port ata17 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata12 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata13 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata10 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata22 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata28 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata2 of PCI device: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset SATA Controller Bad Runtime PM for port ata27 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata29 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata23 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata20 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata21 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata26 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata24 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata9 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata25 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata7 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for port ata8 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for PCI Device ASMedia Technology Inc. ASM1064 Serial ATA Controller Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 0 Bad Runtime PM for PCI Device Advanced Micro Devices, Inc. [AMD] Starship/Matisse IOMMU Bad Runtime PM for port ata11 of PCI device: ASMedia Technology Inc. ASM1064 Serial ATA Controller Good Wireless Power Saving for interface wlan0 Good Bluetooth device interface status Good Autosuspend for USB device Bluetooth Radio [Realtek] Common issue? Or can i do something against it? Can somebody understand, what is going on? Would like to reduce power usage, but not at this cost obviously :) unraid-diagnostics-20250726-0643.zip

For the GT710, are there any caveats like the "order" when a driver has to be installed? or can i simply switch around the "8 combos" and test, unless it works?

Thanks for all the additional input. I'm not really into this game, and this give me lots of topics i can read / google into. But basically, i just wanted W11 for simple Office/Coding tasks to be smooth. And for whatever reason, it is not via RDP on LAN. (W10 was for me) So i figured, i give that task-bar a bit of GPU support with the old 710 lying around. Probably also an option to migrate to an iGPU for AM4 (5700G) or even switching to a newer Plattform? I would preferably keep a GPU out of my Unraid for power reasons. And i do not have any need for workstation workloads like rendering/encoding/gaming.

hey, maybe you can help me out. My WIN11 VM is terribly slow compared to my old WIN10 system. Therefore, wanted to passthrough my GT710 aswell. But i'm unable to fix the code 43 issue. So far, i've tried to optize my kvm settings to "hide vm existance". Wanted to not touch Bios :/ Would love if you can help me out, what you did with bios etc. Or any link to a Guide would help me out big time. Can give you Feedback if it did accelerate anything on my side.

switched from virtio-win-0.1.126_stable to virtio-win-0.1.185.iso. Installed with now included "virtio-win-gt-x64.msi" installer. Network improved now to Vm-To-Host: 9.x GBit/s Host-To-VM: 7.x GBit/s so issue solved by driver updates and got a really good improvement too. Issue solved for me.

any ideas?

thank you very much. <3 that should proof pretty much that i'm on the right track and it's not normal behaviour.

can anyone may test the those iperf benchmarks on their maschine? couldn't find any reverse-test so far, and would be good to know if the speeds should be faster.

Hi guys, I think i do need a little help to further trace my current network issues. Details Unraid-OS: Version: 6.8.3 Network-Settings on Unraid HOST: Bonding: no Bridging: yes Bridging-Members: eth0 IPv4 Only All IPs / gateways are static Local DNS Server on Router. MTU: 1500 Vlans: no Where i'm coming from In summary, i do host a database as docker on my unraid machine. Storage is on the cache NVME drive. Now i have a bunch of operations that should take around 20 seconds to execute. Now i wanted to excess this docker-container from within a a Win10-VM running on the same Unraid Host, which took about 15 minutes. Accessing the same docker-database from an external workstation, it takes the estimated 20 seconds. So from my point of view, it's not: - the storage / hardware ressources - the docker container - the database system After some searching, i do think it is related to the network. So i tested the connections speeds with iPerf. Unraid-Host: 192.168.1.10 VM: 192.168.1.200 .\iperf3.exe -c 192.168.1.10 Connecting to host 192.168.1.10, port 5201 [ 4] local 192.168.1.200 port 60584 connected to 192.168.1.10 port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 433 MBytes 3.63 Gbits/sec [ 4] 1.00-2.00 sec 422 MBytes 3.54 Gbits/sec [ 4] 2.00-3.00 sec 444 MBytes 3.72 Gbits/sec [ 4] 3.00-4.00 sec 436 MBytes 3.66 Gbits/sec [ 4] 4.00-5.00 sec 426 MBytes 3.57 Gbits/sec [ 4] 5.00-6.00 sec 440 MBytes 3.69 Gbits/sec [ 4] 6.00-7.00 sec 439 MBytes 3.68 Gbits/sec [ 4] 7.00-8.00 sec 445 MBytes 3.74 Gbits/sec [ 4] 8.00-9.00 sec 428 MBytes 3.59 Gbits/sec [ 4] 9.00-10.00 sec 449 MBytes 3.76 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth [ 4] 0.00-10.00 sec 4.26 GBytes 3.66 Gbits/sec sender [ 4] 0.00-10.00 sec 4.26 GBytes 3.66 Gbits/sec receiver iperf Done. .\iperf3.exe -c 192.168.1.10 -R Connecting to host 192.168.1.10, port 5201 Reverse mode, remote host 192.168.1.10 is sending [ 4] local 192.168.1.200 port 60587 connected to 192.168.1.10 port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 22.8 KBytes 187 Kbits/sec [ 4] 1.00-2.00 sec 25.7 KBytes 210 Kbits/sec [ 4] 2.00-3.00 sec 20.0 KBytes 164 Kbits/sec [ 4] 3.00-4.00 sec 21.4 KBytes 175 Kbits/sec [ 4] 4.00-5.00 sec 20.0 KBytes 164 Kbits/sec [ 4] 5.00-6.00 sec 20.0 KBytes 164 Kbits/sec [ 4] 6.00-7.00 sec 21.4 KBytes 175 Kbits/sec [ 4] 7.00-8.00 sec 20.0 KBytes 163 Kbits/sec [ 4] 8.00-9.00 sec 20.0 KBytes 164 Kbits/sec [ 4] 9.00-10.00 sec 20.0 KBytes 164 Kbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 328 KBytes 269 Kbits/sec 50 sender [ 4] 0.00-10.00 sec 211 KBytes 173 Kbits/sec receiver iperf Done. As you can see, the network speeds from VM => Host are totally fine with 3.66Gbit/sec. But the reverse-Connection Host => VM is utterly garbage. And i'm kind of stuck now and out of ideas how to trace this further and what could possibly be the issue here. Any advice is heartly welcome. PS: Please just let me know if you need more informations. i'll provide whatever i can.