veritas2884

DOMAINS='xxxxxx.hopto.me' This is what I have the config file set with (x's are replaced with my actual hostname) and I get this error in the logs every time I start the docker: Please enter your domain/group list in noip.conf Any help would be greatly appreciated! Thank you!

FYI: Read this might be a solution: Tried it, but got the attached

Hi, I ran the installer just fine and upon reboot I get the attached screen shot: UEFI Interactive shell. I selected "linux" as the VM type. I went through the installer the same way I've done on my bare metal Ubuntu Server 16.04 installs. Don't know where I am going wrong. Thanks for any help!

Thank you both for your help. Auto didn't work for me, but hard drive did. I am up and running! Thanks for pointing me to the issue.

Thank you for the reply. I have tried each of your suggestions. I have tried all usb ports on the motherboard. Same result. Any other place to turn?

I upgraded my motherboard, cpu and ram. I to a GA H-170-N Wifi. It is a board that I read others in the forum had no issues with. However, when I put the flash drive i've been using in to boot, after the bios splash page I just get a blinking cursor and it never fully boots. I tried the drive back in the old system and a in a virtualbox and it works fine. I believe it must be a setting I am missing in the bios, I disabled the UEFI and set the drive to FFD. I get the option in the boot menu to boot to UEFI:SANDISK and SANDISK. I make sure that SANDISK is set as the priority and I have manually selected to boot from it as well, same result. If I use UEFI one it goes straight back to the bios. The motherboard is fully functional as I have a windows drive I can boot and run form it without issue. Any help would be excellent!

Thank you for the reply and continued help CHBMB. I looked at the topics in there around dockerhub dockers, which I assume would be similar to getting a docker from github. I still am at a loss of how to actually import the file, where to place it and how to get unraid to recognize it. Sorry for being dense but I couldn't make the leap from that post to getting this to work. Did I look at the right ones?

Sorry if this has been asked and answered. Is there a step by step walk-through somewhere to add a docker to unraid without having a repository for it? I would like to install this: https://github.com/rogueosb/docker-plexrequestsnet I am not afraid to do it via SSH but I just need a guide for that. Any help would be greatly appreciated!

Awesome! Thank you!

I am playing with the Openflixer VM and when it is up and running it creates an IP address that you type in a browser to complete setup. In this case it is 192.168.122.72 displayed by the VM. However, all of the other IPs my router gives out are 192.168.0.xxx IPs. When I try 192.168.122.72 from another PC on my network it times out. Is there something I have to do to make that IP available to my network? My Windows 10 VM runs fine... Thanks for any help.

If I am understanding you correctly, you should be able to create a custom VM using any of the templates (say Linux) and set Primary vDisk Location Manual and point it to that IMG file. John That was it precisely. Sorry, I know it was a rookie question. Appreciate the assistance.

I have KVM.IMG that I would like to create a virtual machine around. I may be completely daft right now but I can only seem to find ways to make a VM with an installer image. If I have a preset KVM.IMG how can I set a VM to use that?

if that fixed it then you need to work out why the permissions were wrong in the first place or the problem is likely to re-occur. How was the file put there in the first place? Couchpotato does my movie sorting and Sonaar does my TV sorting. Could they not be granted the correct permissions?

Figured it out. I ran Tools - New Permissions and it worked!

Any other ideas I can try Trurl?

Thanks to you both for the speedy reply!

I have an rclone docker installed ( https://hub.docker.com/r/tynor88/rclone/ ) and have it pointed to the folder I want backed up. rclone says to configure it you have to run the command rclone config I have used to telnet to remote into my box but running that command gives me this: -bash: rclone: command not found How do I use a command prompt to run commands for a docker? Sorry I am linux newbi and don't know if I am asking the right questions.

Increase the docker size to 30GB and try it. That fixed it for me.

Here is my output... Phase 1 - find and verify superblock... Phase 2 - using internal log - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan (but don't clear) agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 1 - agno = 4 - agno = 2 - agno = 5 - agno = 3 - agno = 6 - agno = 7 No modify flag set, skipping phase 5 Phase 6 - check inode connectivity... - traversing filesystem ... - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify link counts... No modify flag set, skipping filesystem flush and exiting.

Running test now. I will let you know that even though I cannot access the folder via Windows networking. Plex, which is running in a docker in Unraid, can still play the file inside that folder without issue.

Hello All, Having an issue where some folders inside a share work great and other folders give me a "Network Error" pop up with the text "Windows cannot access \\server\share\folder" Then in smaller text it says " You do not have permission to access \\server\share\folder . Contact your network administrator to request access" Since that person is me, I am out of options :-) I will let you know that even though I cannot access the folder via Windows networking. Plex, which is running in a docker in Unraid, can still play the file inside that folder without issue. Any help would be awesome. carefreecfc-diagnostics-20160927-0906.zip

The most recent thing I installed was Plexrequests. But I have checked all of the paths for everything and they were valid. The closest thing I've found is a recommendation to have a file size of 15-20 gigs to start because the default 10 is never enough.

Thank you, that makes a lot of sense. Any way to track down the culprit? I have all of their cache files set outside the image.

So I increased my docker img file size to 50GB and restarted. It brought back that docker tab and now I have orphaned docker image files for some of my dockers. I deleted them and re-added them. What caused this issue? Why did my docker size need to be increased when I am running very few dockers? Thanks for any help

So I have been running all of my dockers (plex, sonarr, cp, nzbget, plex requests, headphones) with no issues for weeks now. This morning I did a clean shut down to replace an older power strip and when I booted back up and started the array, it shows that the docker is starting in the status text at the bottom during spin up, but the docker tab never comes up and none of dockers are running. I checked under Docker in plug ins and it shows active. I have rebooted twice and no luck. Please help I am desperate.