cstone94

Mmmmm, not sure on that. I had the 5014 working at one time, WebGui showed my 8TB drives, but I guess I should have just ran with Windows Server 2012 and set it up as a file server. I successfully flashed it again, and now I get raid adapter memory error check sdram... Edit: M5014 successfully flashed to 9260-8i, but UNRaid still shows no disks.

BUT; I just flashed the 5014, let it flash each sector; got to the end where it showed me Success. Shut down the LGA775 machine, installed it back into the x3650 server and got RAID Controller SBR Corrupt or Bad error.........

I got my hands on an LGA775 board. The 1015 still gives me No MR Controllers found. the 5014 on the other hand, I was able to find it, and go a clean flash on it. Will post back the result. Edit: Yes, the 5014 is flashable; https://www.servethehome.com/flash-ibm-serveraid-m5014-lsi-92608i-firmware/

Yes, I bought an IBM x3650 M1 for extremely cheap, and got these HBA's to make a NAS using UNRaid; but no disks were showing up. If I created an array, UNraid could see the whole array, but only as 1 disk. So now I am trying to flash 1 of these controller's I got; very close to building a unit.

1 of the Servers was a Dell that ran Windows Server 2003. I think it's a PowerEdge 2300?? No luck there either.

I've got an IBM M5015, M5014, and M1015; all of them are giving me errors. Sometime's they are PAL errors, sometimes they are No LSI adapter errors. I have tried putting them in 4 different Servers, and 3 different custom built PC's. 1 ASROCK z97 Extreme4, 1 ASUS X99-M WS, 1 ASUS Z10PE-D16 WS.

I tried removing all but 1 RAM disk and still get the memory error.

Can you elaborate? I assume, making a DOS USB with rufus, and then where does himem.sys come into play?

I'm also trying to flash an M1015 and am getting this error as well....