cstone94

Members
 View Profile  See their activity

  • Posts

    9

  • Joined

  • Last visited

 Content Type 

Everything posted by cstone94

  1. cstone94
    Mmmmm, not sure on that. I had the 5014 working at one time, WebGui showed my 8TB drives, but I guess I should have just ran with Windows Server 2012 and set it up as a file server. I successfully flashed it again, and now I get raid adapter memory error check sdram... Edit: M5014 successfully flashed to 9260-8i, but UNRaid still shows no disks.
  2. cstone94
    BUT; I just flashed the 5014, let it flash each sector; got to the end where it showed me Success. Shut down the LGA775 machine, installed it back into the x3650 server and got RAID Controller SBR Corrupt or Bad error.........
  3. cstone94
    I got my hands on an LGA775 board. The 1015 still gives me No MR Controllers found. the 5014 on the other hand, I was able to find it, and go a clean flash on it. Will post back the result. Edit: Yes, the 5014 is flashable; https://www.servethehome.com/flash-ibm-serveraid-m5014-lsi-92608i-firmware/
  4. cstone94
    Yes, I bought an IBM x3650 M1 for extremely cheap, and got these HBA's to make a NAS using UNRaid; but no disks were showing up. If I created an array, UNraid could see the whole array, but only as 1 disk. So now I am trying to flash 1 of these controller's I got; very close to building a unit.
  5. cstone94
    1 of the Servers was a Dell that ran Windows Server 2003. I think it's a PowerEdge 2300?? No luck there either.
  6. cstone94
    I've got an IBM M5015, M5014, and M1015; all of them are giving me errors. Sometime's they are PAL errors, sometimes they are No LSI adapter errors. I have tried putting them in 4 different Servers, and 3 different custom built PC's. 1 ASROCK z97 Extreme4, 1 ASUS X99-M WS, 1 ASUS Z10PE-D16 WS.
  7. cstone94
    I tried removing all but 1 RAM disk and still get the memory error.
  8. cstone94
    Can you elaborate? I assume, making a DOS USB with rufus, and then where does himem.sys come into play?
  9. cstone94
    I'm also trying to flash an M1015 and am getting this error as well....