nicecube

Disc 6 is good, I got confused with disk 5 I was not at home when I wrote the message, Disk 5 was tester on another PC with another sata cable definitely dead, I will test it tomorrow at work but I have little hope that it works again 2017-09-04 15:21:16 Model Number: ST3000DM001-1ER166 Serial Number: Z5011Z4Y Firmware Revision: CC25 Fix All Long - FAIL 2017-09-04 15:51:21 SeaTools Test Code: F369AACB All the data on the array was good, but i dont have another 30Tb for the backup

How i can copy my data if i cant start the array ?

I ll follow the recommandation, i dont want to loose data anymore 3tb is enough

Disk 5 was defect i run the Seagate tools on 2 other computer and the drive was not responding also tested with 1 other sata cable. I ll backup the data from disk 2 and 12 on my pc Ll

What i need to do now, i removed the bad drive, i cant no longer start the array

I cancel the Check because in less than 5 min i have now more than 2015 errors on this disk so i dont want to check it i want to remove it Someone can tell me the best way to copy my data to another disk and removed the defective disk from my array After a reboot the drive is now missing Tested it with Seagate tool and the drive failed all test

Im pretty sure this drive is about to die, i dont realy trust this seagate drive anyway i just rebooted the server and started the array in maintenance mode now my drive is mounting fine but im scare i want to copy my data to my new WD red and remove the probably faulty drive Im running i file systeme check right now, How long it normally takes *Again sry for my english

I ll make a backup with crashplan is cheap and unlimited storage i have 100mbs upload so if it take 1 or 2 month to upload it its better than nothing

yeah i know but when you have 30 tb its prety hard to backup lol I migrating from windows to have a bit of parity anyway its movie and tv show not precious picture or memory so if i loose it i can d/l it again

No, i dont tested each disk before adding it to the array it was my bad So i want to remove the bad drive from my array, i ll reboot the server to see if it can mount again. If its the case could you show me the best way to copy my data and remove it to my array i hope it ll mount again the time i ll copy my data

I was migrating from Windows so i created a new array with a new 6TB drive emtpy my original drive added it to my adday rince and repeate to add all my drive. But now my drive 5 is unmontable so i think is dead.

Here is my tower-diagnostics also i think i have a third drive defect ;( tower-diagnostics-20170904-0906.zip I started my Array and now my disk 5 is unmontable

Ty vm for you help and your advice, i ll wait before doing anything. ll post my diagnostic as soon as possible.

Im not at home right now but in the error section i got more than 2k of error and in the main tab i got a triangle in front of this drive. Also my unraid web gui stop responding so i think theses drives are defect. When i ll be at home i ll start Tools -> Diagnostics Meanwhile I did research and i think the best way to process would be: 1: Edit my share and remove/exclude thes 2 drives from my movies share 2: Using Krusader copy data from /mnt/disk2 to /mnt/User/Movies 3: Using Krusader copy data from /mnt/disk6 to /mnt/User/Movies 4: Use New Config to unassign removed from the array 5: Assign new parity drive and lets rebuit Correct me if im wrong i dont want to make a error and loose my data

Hi, im new to unraid i have a big problem and i dont know what to do, sry for my english this is not my mother thong I have finished the migration of my data to my new array. I added a parity disk and started the process, the problem is that there seems to be 2 defective disks and the parity would take 2356 days to complete ... I would like to copy the data from my 2 defective drives and removed them from the array and then add my parity disk. Someone can tell me the best way to do it without loosing my data. If I exclude the 2 disks in my shares and I copy the data of the drives with Krusader it will work? I hate Seagate drive, it's the 4th that falls defective, Western digital is really better ...

Hi, i just started to move all my data to Unraid, im using Krusader to copy all my files. This morning i started a copy of all my Tv show to the array but my progress bar disapered, How i can see if my files was copied. How i can display the progress bar i dont want to stop my array if the transfert was not finish.

Hi, im new and i want to copy my media to my new unRaid Array - I have installed Unassigned Devices plugin - I Have installed Krusader and set /mnt/disks/ - It not showed up in krusader and im unable to mount any drive what i'm doing wrong Edit: I managed to mount my drive but it look empty i can't see my files someone can help me Edit: I have restarted Krusader and its work !

Another quick question, what is the best way to store my media /Media /Movies movie01.mkv movie02.mkv movie03.mkv /TV Shows Game of thrones /Season 01 s01e01.avi s01e02.avi s01e03.mp4 /Season 02 s02e01.avi s02e02.mkv s02e03.m4v or creating multiple share like this /movie movie01.mkv movie02.mkv movie03.mkv /TV Shows Game of thrones /Season 01 s01e01.avi s01e02.avi s01e03.mp4 /Season 02 s02e01.avi s02e02.mkv s02e03.m4v This way i can use split level 2 for movie and split lever 3 for tv show For a plex server what is the best allocation method High-water, Most-free or Fill-up I dont care about where are my media movie on disk 2,3,4 and tv show 4,5,6 bla bla bla What is the best way to configure unraid for a Plex Server need some advice !

Thank you very much to both of you, I understand better now, I will start my migration tomorrow, I hope that all goes well!

Thank you for your valuable advice, what I also wanted to know is if one of my disks fail the parity will re synchronize the data on a new disk. If i loose 2 drive in the same time will i lose all my data, In a raid 5 i can loose 1 drive what happen if i lose 2 drive in the same time Sry for my english im using google translate im french

Hello, I am new to Unraid and I have some questions. I currently have a Windows server with 13 hard disks that I use mainly as a Plex Server. My hard drives are all different I'd like to create an array with Unraid. I wanted to know how much disk I can lose in the pool with the following configuration: What is the best way to transfer my data, my drives are in NTFS I listened to some video and I think the best way is to install UD and Krusader. Create an array and copy my data then repeat the procedure by enlarging my array I wonder if krusader will see my data in NTFS i dont want to copy over my network (Parity) 1X 6TB WD Red (Array) 1X 6TB WD Red 1X 4TB WD Red 4X 3TB Seagate 5X 2TB WD Green 2X 1TB WD Black (Cache) 2X 120Gb Kingston If you have suggestions this would be appreciated