milanp

Members
  • Posts

    16
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

milanp's Achievements

Noob

Noob (1/14)

1

Reputation

  1. Does this apfs-patched.efi work with Mojave ? Where to get it?
  2. @CHBMB Logged in just to say BIG thank you. Unraid DVB edition 6.6 for Digital Devices works perfect. Running for more than a day and no problems so far.
  3. @CHBMB Many thanks for the Digital Devices 6.5.2(GitHub) image, installed it a few hours ago, and so far it's working as expected.
  4. Opened a ticket at Digital Devices: Case Tracking ID: PQB-Q98-951V Lets see if they care about linux at all. It's a pity that Digital Devices cards once configured, run perfectly, but I had a long frustrating period with them when I was running them on Ubuntu.
  5. That's interesting, might want to report that to DD, sounds like the devices aren't getting correctly reset at reboot and need a complete power cut. Spoke too soon, the tuner cards are detected(4 DVB-T+4 DVB-C) , but will not tune any DVB-C channels. I thought that the drivers worked, but it was my trusty HDHomeRun 4DC that was streaming. I give up, this is the main system that I use all the time and wife and children complain when tv is not working. Went back to Unraid 6.5 where everything works.
  6. You are right, the quad tuner works. One small trick is required: - If I reboot the system after installation, only two tuners were reported. - If I powerdown the system after installation,and turn it on, all 4 tuners are reported. Tried the same procedure twice, with same results. Conclusion: Instead of rebooting the server, it's better to shut it down, then power it up. Could be my HP-Z620 that need complete shutdown, but I am on Unraid 6.5.1 stable and very happy that libreelec drivers support my tuners. Thanks a lot.
  7. Card Also can you post the exact model numbers of your tuners please. These are the cards that I use: 1. Quad tuner with dual CI: DD-DuoCT+OctTW Digital Devices DuoFlex CT (x2) + Octopus CI Twin - reported by your plugin as: STV0367 DVB-C DVB-T (DVB adapters 0-3), Last working version Unraid 6.5.0 , Unraid with libreelec 6.5.1 drivers detect only 2 tuners which work. I don't use the CI module slots..... 2. Dual tuner x2 : DD-CineCTV6 - I don't have access to this system at the moment. Currently using Unraid 6.3.5
  8. Thanks for the prompt info. I have two server installations of Unraid with digital devices tuners. First one is: Quad Digital Devices DVB-C/T tuner + HD Homerun. Second one is: 2 x Dual DVB-C/T tuner. I will check if the 2 x Dual works with the latest LibreElec, and report back. I believe the problem is the driver for quad Tuner, because only two tuners are detected, and that's something that Digital Devices should fix, not you.
  9. I've been running this plugin with tvheadend and digital devices quad tuner for quite a long time without any problems. (unraid stable 6.3.5 ,6.4.0,6.4.1), using tvheadend docker. Are there any chances to have an unraid 6.5.1 image with Digital Devices (Github version) driver? I also tried the libreelec 6.5.1 drivers, but those drivers detect only 2 of my 4 tuners.
  10. I have exactly the same functionality working, emby with tvheadend plugin. Two things are essential: 1. To have user defined in tvheadend (you can add a password to the user in configuration->users->passwords) 2. You have to add the ports for tvheadend to the emby docker (default 9981 and 9982)
  11. I already read the wiki, and read it several times. And instructions were the same as with any tvheadend , but the list of grabbers is much bigger,it seems that I could not see the grabber I needed, and I was 100% sure that Internal: XMLTV (tv_grab_file) is not on the list anymore.(Wondered why ?,thought I have to learn something new?) FINALLY FOUND THE GRABBER IN THE BOTTOM PART OF THE LIST ,SET EVERYTHING AS USUAL,AND IT WORKS. Thank you.
  12. I am also confused. I run two tvheadend servers in parallel, one on libreelec, and one on Unraid. After going to the web interface of the libreelec tvheadend server, strangely the tab with epg-grabber modules appeared. Seems something was wrong with the browser. I could run the grabbers from Anyways, I enabled the external xmltv grabbers from EPG Grabber tab->rerun internal tv-grabbers. On my libreelec tvheadend I run two grabbers: - External XMLTV - Internal: XMLTV (tv_grab_file).... This one is missing in the docker tvheadend configuration. And I just wget my tvguide.xml half and hour before the schedule of tvheadends schedule and I have never had a problem. I am completely new to dockers, and I am lost. Below are screenshots of my previous strange situtaion, first one without the EPG Grabber tab, second one with it, same machine, same adress, same server.
  13. Complete newbie to unraid. I installed 6.3.5 with TVHeadend docker and DVB Edition with drivers for Digital Devices (DVB-C tuners). Everything works expect I cannot find a way to import my file with tvguide. Under Configuration->Channel/EPG->Epg grabber modules, nothing is listed. The guide from DVB Grabber works, and some of the channels have program info. I tried to put my tvguide.xml in .xml folder, also epggrab, and manually rerun internal tv grabbers but no info from the file is shown. The same file works perfectly on Libreelec with TVHeadend plugin. Please help.
  14. Win 10 will be used sometimes for Office 2016,Chome. It will not be active most of the time. But when WIN10 is running it should not affect the performance of the other services,primarilly TVHeadnend must run smoothly.