Christo

Hi everyone I installed ruTorrent container and had some issues with port conflicts. Changed the port for the torrent client and may have stuffed up the entire thing. I removed the container from the command prompt and rebooted the server. Now if I go to the Unraid server address I get the torrent interface with Bad response from server: (0 [error,getplugins]) error. This happens on both port 443 and 80. All the other containers are operational and running no problem Is there a way to get the console back ?

Dont worry ... I managed to find someone to help me and fix it outside of this forum. I have learned now that a noobs don't deserve help from advanced users here... Thank you

So here is an interesting one I had a disk with bad sectors (Disk3). Replaced the physical disk with a new one. Had to use "new configuration" to get the system to see the disk and mount the array. Before replacing the disk I removed it from the shares so that mover can evacuate the data from the disk. This all worked well. While creating the new config I swapped disk 3 and 4 to get them to correspond to the correct slots in the server. ( Yes I do have really bad OCD) Now I need to add the disk back into the shares, but disk 4 (previously known as Disk 3 - the blank disk ) is already back in the shares but disk 3 with the data on is missing from the list when I want to add it back to shares... I am completely puzzled 🙂 ----- Edit ------ Did a new config again and moved disks back to where they were ... No matter where i move the empty disk, It cant be added to existing shares. Even if I try creating a new share, the blank disk is missing from the list I found the disk sitting under "disk shares" What the ......... ?

I am trying to replace a 3TB drive with bad sectors with a 2TB drive. Not running any parity. Can this be done ? If so ... How ? There are man y posts on here explaining something like this but I cant find anything that works. Keeps getting missing or wrong drive Sorry ... Still noob here trying to learn

Thank you ... Done and working

Can anyone please assist I am not a Linux guy by any stretch of the imagination so please be patient. I added IOTop from Nerdpack but get the following error trying to run it libffi.so.7: cannot open shared object file: No such file or directory To run an uninstalled copy of iotop, launch iotop.py in the top directory Can anyone point me in the right directions please ?

Can you please explain how to do this ?

Thank you

I am not a Linux guy by any stretch of the imagination so please be patient. I added IOTop from Nerdpack but get the following error trying to run it libffi.so.7: cannot open shared object file: No such file or directory To run an uninstalled copy of iotop, launch iotop.py in the top directory CAn anyone pint me in the right directions please ?

As requested mediaserver-diagnostics-20200515-2316v3.zip

Seems this problem is not only related to cache disks ... I had the same problem but removed the cache disk from the equation and now my Disk 1 (XFS) is taking a hammering Anyone experienced this ?

Removed the cache disk from the equation. Now Disk one takes a hammering. Disk 1 is XFS The above does not seem to be relevant

I see there is constant activity writing to cache disk... The log file mentions May 15 12:02:57 MediaServer kernel: ACPI Error: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20180810/power_meter-338) May 15 12:03:07 MediaServer kernel: ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20180810/exfield-390) Anyone seen this before ?

Thank you ... seems to work ... UI is back and its rescanning the disks to rebuild the DB Thank you for your help

I just deleted the container and re-installed Now removed the container and renamed the db file and then installing the container again Will feedback