jang430
-
Posts
1491 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by jang430
-
-
I'm trying to learn docker. Unraid makes this pretty easy. Though I'd like to learn it via console, and typing the commands. Is this possible? Is docker compose possible as well?
Currently, I'm running Unraid with 3 drives, all in the array. No cache drive. Is it still possible to use docker via console?
-
Hi guys! Running out of hope
-
Hi. I have an old HP Microserver, currently with Unraid running. Due to super low specs, it can no longer run plenty of docker containers. When Sab unpacks, CPU reaches 100%. While Sab downloads, also reaches almost 100%. I decided to put docker on an Intel NUC I have. I installed Ubuntu Server, Portainer, also installed CIFS-Utils. So far, I was successful in mounting a share I created in Unraid. While creating a new container (Sab), and choosing this volume as location for config, I get this error.
In order to create network volume in Portainer, I also used the jtest:password credentials, as it is needed while creating a CIFS volume.
The share I created in Unraid was setup as Private, and user jtest was given permission. I also tried setting it to public, and result is the same. Any tips?
-
I plan to install docker onto an Intel NUC instead, Ubuntu and portainer. What's the best way to this Intel NUC to Unraid NAS? SMB?
Are there other alternatives?
-
Cannot use the built-in wireguard in Unraid to connect to Sophos site to site?
-
@dgaglioni Sorry I wasn't able to see your message earlier. I'd like to keep the resource usage to as low as possible. Isn't this possible with Unraid's wireguard?
Is Vyos a VM or does it have a docker container?
-
I know not a lot are using Sophos firewall. But I hope someone who's knowledgeable can share some info. Sophos f/w will be my server, and Unraid will connect to the server.
-
Anyone interested with Truenas Mini E+ and Mini XL+ case?
If I'm going mini-itx, this will be my ultimate case
I know this is Ablecom brand, but cannot be purchased anywhere. I've been looking for this case for the longest time. If it's a vertical form factor, this is the best looking case for me. Although I also have a thing for horizontal form factor, such as Synology 8 bays.
-
Hello. I've successfully connected my NAS to Cloudflare tunnel, hence I can access Unraid GUI. The network where Unraid is at is behind CGNAT. How do I remote to the XRDP desktop on the remote Unraid when it's behind CGNAT?
-
This happened to me again, and I just thought I should share the solution to the problem. It turned out that I made some changes to my Unraid's IP address. Since the IP address is new, I can access deluge and sabnzbd using it's new IP ADDRESS. Accessing the container via dashboard, selecting webgui gives me the problem "about:blank#blocked."
-
I mainly use the webgui to install docker apps. Is there a way to check docker container sizes to see which container is filling up? I can't find any wrong volume mappings, but I'm sure something is not right.
-
You're right, I don't want to do that
Once the service is up, the gui isn't responding. Any more ideas before I do the worst scenario?
-
Currently, I have gluetun setup. But because of changing things back and forth, my last revision caused the gui to freeze. Reboot doesn't fix the problem. I started Unraid in safe mode, and disabled docker, and started the array, and it works. Now, how do I disable or delete a container in docker? Once I start docker, array will freeze.
-
I installed Gluetun, and have deluge and sabnzbd pass through it. I have everything working. Leaving it overnight, and right now, I see "unversioned API: requested URI not found" when accessing webui of Gluetun, and when accessing both deluge and sabnzbd, I see "about:blank#blocked". All other docker images seem fine, and still working. What could be the problem?
-
The upgrade can be done manually. First download the ZIP file for the version that you want. Shut the server down. Put the boot drive in your PC. Make a backup copy of that drive!!! Then follow the instructions in this post:
https://forums.unraid.net/topic/97574-upgrading-from-635-how-to-manually-upgrade/#comment-900096
Yes. This has been how I do it before. I just noticed that this isn't just a single version upgrade issue, in fact, it has been ongoing for several version upgrades already. That's why I realized there's a problem.. Thanks
Sent from my iPhone using Tapatalk -
For each upgrade download, it never finishes. It just so happens I have another Unraid server here with me, under the same network, and that unit downloads, and upgrades without any glitch. All finished within a matter of minutes.
What could be the cause for my own nas not to finish download of unraid all the time? To think this is a fresh installed unraid USB. Restarted from scratch. Download stops at 16%, and extracts. But fails due to not being complete. Could it be my memory is only 2 GB, and currently, it shows 64% used?
-
Hello. Can anyone give some ideas how to do this?
I read about a lot of instructions using Cloudflare Argo tunnels. Is that the way to go?
-
Thank you trurl. I will look into it.
-
-
Hello. Can someone help see why I'm having this problem? Is the generated diagnostics giving meaningful information?
-
-
Hi. I did plug a keyboard and monitor onto it, and I can login as root. Though I don't know how to generate diagnostics from the console.
I later recreated Unraid on a new USB, doing new config, doing everything all over again (lucky there isn't any content of importance, and I also want to redo it). This seemingly has been consistent already, at least for now.
I then have another system, also Unraid, also experiencing the same problem, can login when keyboard and monitor is plugged, but not accessible via web gui. Before I updated the My Server plugin, it seems to work fine. Could the old My Server plugin, when upgraded to the latest, possibly cause this problem of not being accessible in web gui?
To test my theory, what can I remove from my USB to remove the recently upgraded My Servers plugin?
-
Hello. Anyone? I've since replace my USB to a new one, replaced the license. I've deleted all the contents of config except for the license key. Up to now, access to web gui is intermittent. But right now, it's totally inaccessible.
I've connected a monitor and keyboard to it. I can see that it's assigned an IP address. But heading to that IP address via browser doesn't give me the web gui. Pinging still works. Running out of ideas of how to troubleshoot.
-
Hello. Without a proper port forwarding set up, can I still remote access this server if signed into My Servers plugin?
Once the service is up, the gui isn't responding. Any more ideas before I do the worst scenario?
Is it possible to run install/ run docker not using the gui?
in Docker Engine
Posted
Thanks @primeval_god. I already get what I need with Unraid, simple Docker implementation. The purpose now is indeed to learn the basics. I'll use another system so that it doesn't affect Unraid.