dacmcbibs

Members
  • Content Count

    10
  • Joined

  • Last visited

Everything posted by dacmcbibs

  1. I had this challenge as well, and wanted to share my experience in case it helps others. My issue turned out to be the extension Ghostery. White listing the unraid server was not enough. The white screens wouldn't stop until I paused or disabled the add-in entirely.
  2. Thanks for the tip.. that would be unfortunate since i already replaced this RAM once (almost exactly a year ago) .. but i guess i will be running a memtest again Thanks for the pointer.
  3. I am starting to see errors on my cache drive pool (sample attached) cachedriveerrors.txt I suspect that one of the drives in the pool is starting to fail , but when i try to run smart tests on the drive nothing seems to happen (no feedback after the button click) The btrfs dev stats are not showing any errors: root@TheBeast:~# btrfs dev stats /mnt/cache [/dev/nvme0n1p1].write_io_errs 0 [/dev/nvme0n1p1].read_io_errs 0 [/dev/nvme0n1p1].flush_io_errs 0 [/dev/nvme0n1p1].corruption_errs 0 [/dev/nvme0n1p1].generation_errs 0 [/dev/nvme1n1p1].write_io_er
  4. that was the conclusion I eventually came to as well Thanks for your reply
  5. Thanks for the pointer. It took several 24 hour memtests before it actually occurred but i did finally find a bad memory DIMM I've replaced the faulty memory and ran a clean 24 hour memtest. Hopefully the system will be stable now. I appreciate the help!
  6. FYI - Unraid's build in memtest would not boot, but I created bootable media for memtest and it came back clean
  7. Attached are the diagnostic logs requested.. about to run a memtest unraid-diagnostics-20180325-1541.zip
  8. Thanks for the quick reply, here is the output from the dev stats command: [/dev/nvme1n1p1].write_io_errs 0 [/dev/nvme1n1p1].read_io_errs 0 [/dev/nvme1n1p1].flush_io_errs 0 [/dev/nvme1n1p1].corruption_errs 159 [/dev/nvme1n1p1].generation_errs 0 [/dev/nvme0n1p1].write_io_errs 0 [/dev/nvme0n1p1].read_io_errs 0 [/dev/nvme0n1p1].flush_io_errs 0 [/dev/nvme0n1p1].corruption_errs 159 [/dev/nvme0n1p1].generation_errs 0
  9. every few weeks i run into an issue with my cache drives where it ends up taking the system off line. The disk log shows the following: ar 24 10:21:42 TheBeast kernel: BTRFS error (device nvme1n1p1): unable to find ref byte nr 505982324736 parent 0 root 5 owner 5166944 offset 0 Mar 24 10:21:42 TheBeast kernel: BTRFS: error (device nvme1n1p1) in __btrfs_free_extent:7073: errno=-2 No such entry Mar 24 10:21:42 TheBeast kernel: BTRFS info (device nvme1n1p1): forced readonly Mar 24 10:21:42 TheBeast kernel: BTRFS: error (device nvme1n1p1) in btrfs_run_delayed_refs:3089: errno=-2 No suc
  10. I'm looking for a little help with Intel IGD pass-through. Every time i try to enable pass-through the VM refuses to boot and i find the following error in the logs: 2018-03-04T15:30:19.849395Z qemu-system-x86_64: -device vfio-pci,host=00:02.0,id=hostdev0,bus=pci.0,addr=0x2: Failed to mmap 0000:00:02.0 BAR 2. Performance may be slow I have tried the following: Set VNC as the default graphics card. when trying to connect it tells me that the guest has not initialized the display (yet) Turning the Hyper-V setting on and off Different combinations of Bios and m