MrBrac

no more errors on disk 1(10) with older cable swapped.

Disk 1 as Dev 1 smart test keeps saying I interrupted it which is a lie. I think the disk is old and dead. BTW what do you think of my Ethernet options should I upgrade? swapped cables for all disks on sas and now disk 10 is now disk 1 lets see

I bought some nice power splitters off amazon the Y types and I got cables off amazon. My PSU is EVGA brand I trust them. What about running a memory test?

I know disk 9 and 10 are healthy well IO errors happen on 9 when parity starts. Disk 1 is really old but has passed smart stats. I think i will pull that disk. I replaced the sas cables before I can reswap the old cables. There standard blue cables from amazon.

gonna swap disk 1 and 10 after parity is fixed.

I mean I dont really know at this point , I checked disk 10 its good empty disk. at the moment I am just trying get back my parity and save disk 9. It seems crazy that I got this much disk issues.

I never did a rebuild , I formated it and said screw the rebuild I moved data off emulated disk and formatted it. I also formated 11. I then did parity check and somehow I got 5.6 GB speed instead of my usual 143 mb speed. ... This was a parity check. I ran extended smart test on 9 10 11 , so far 9 and 10 came back 100% good. Ok Idk anymore Took out DIsk 1 and 10. 10 had a good smart health. I think 1 is old and dropping out. Now it says my parity is X Says disk 9 has errors but I ran xfs repair and nothing I cant sleep with this crap , so I redid parity in maintenance its now doing a parity sync. Before it was trying to do a check but I removed 2 disks so that would cause confusion right? so the parity is totally invalid and has be redone. + the disk is brand new I can not believe I have this many disks with issues. I keep running xfs repair on so called issue disks and it has no problems. bracservultra-diagnostics-20221021-0258.zip

I got the new sas attempting to redo parity , I formated 10 and 11. Right now 10 is btrfs and rest are xfs is that okay? I went to switch disk 10 back to XFS , need format it . But then the parity is going insanely fast roughly 6gbs a second and its almost done. bracservultra-diagnostics-20221019-1446.zip Oct 19 12:59:30 bracservultra kernel: Buffer I/O error on dev md10, logical block 1953506608, async page read Oct 19 12:59:30 bracservultra emhttpd: shcmd (197): mkfs.xfs -m crc=1,finobt=1 -f /dev/md10 Oct 19 12:59:30 bracservultra root: mkfs.xfs: pwrite failed: Input/output error Oct 19 12:59:30 bracservultra root: libxfs_bwrite: write failed on (unknown) bno 0x3a3812948/0x100, err=5 Oct 19 12:59:30 bracservultra root: mkfs.xfs: Releasing dirty buffer to free list! Oct 19 12:59:30 bracservultra root: found dirty buffer (bulk) on free list! forget everything said and lets just look at current daigs , cuz stuff is running good. Somehow parity was done in 45 mins . bracservultra-diagnostics-20221019-1446.zip

I tried everything I can not rebuild disk without it freezing , tried do it in maintenance. bracservultra-diagnostics-20221016-1354.zip

I am buying a new SAS , at dont trust this sas , just swapped it back. disk 10 back to being a jack. ITs using same cables the 7 other disks are using , all other disk issues non sas are not issue with my swap back.

so I swapped my sas card to pci slot 2 and now I got massive errors everywhere ? bracservultra-diagnostics-20221015-0613.zip

checked cables and then ran xfs_repair all good on disk 10 rebuild now.

I have gigabit internet , I get poor download speeds , You think it could be my tp link pci ethernet card? the eth0 on mobo died. Right now doing rebuild on disk 11 with bad sectors. But disk 10 has crc issues and now i Can tell its i/o error and now it needs to have its XFS fs cleaned again bracservultra-diagnostics-20221014-0127.zip

Is this normal for replacing a readable disk with a new healthier disk? ITs doing the rebuild now.

the only thing I can think off , I can never get /mnt/cache to unmount so i got reboot to get it to work. I try stop and its stuck for 30 minutes. diag from the rebuild. bracservultra-diagnostics-20221010-1210.zip

No crashes at all, its really odd. I have not run a mem test. its rebuilding now I got no idea whats gonna happen. If it will go back to disk 1 when I did parity about month ago. This is old disk and its mostly inactive.

Lost ton of data bracservultra-diagnostics-20221008-1615.zip

Disk 1 is now corrupt and said its emulated but its saying unmountable root@bracservultra:~# mkdir tmpxfs root@bracservultra:~# mount /dev/md1 /tmpxfs mount: /tmpxfs: mount point does not exist. dmesg(1) may have more information after failed mount system call. root@bracservultra:~# mkdir /tmpxfs root@bracservultra:~# mount /dev/md1 /tmpxfs mount: /tmpxfs: can't read superblock on /dev/md1. dmesg(1) may have more information after failed mount system call. Even when I take the disk out and its says not installed it says unmountable. My parity has the disk1 safe from a month ago. Not much data changed on disk 1. So I got amazon sending me a new disk by 10th. I can just rebuild the parity? bracservultra-diagnostics-20221008-1615.zip

I just reformatted and I am gonna pre clear.

So did I waste my time to rebuild the disk 2

after the rebuild do i format ?

data rebuild starting now on new disk

I am getting hard drives to replace disk 2 and 11 today. Disk 2 is emulated and has about tb on it. When I rebuild disk 2 I will get my data back?

I did extended smart test on this disk

Ok I stand corrected. so do disk 2 and 10 out and rebuild then you want a diagnostics.