Sledgehamma

My 3rd Seagate 10TB IronWolf: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 083 064 044 Pre-fail Always - 223599568 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 4 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 074 060 045 Pre-fail Always - 25261913 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 76 (206 164 0) 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 4 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2 190 Airflow_Temperature_Cel 0x0022 058 057 040 Old_age Always - 42 (Min/Max 32/43) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1200 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 5 194 Temperature_Celsius 0x0022 042 043 000 Old_age Always - 42 (0 22 0 0 0) 195 Hardware_ECC_Recovered 0x001a 008 008 000 Old_age Always - 223599568 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 114022791774283 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 19532873968 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 59745589152 == Using :Read block size = 1003520 Bytes == Last Cycle's Pre Read Time : 19:59:44 (138 MB/s) == Last Cycle's Zeroing time : 15:57:04 (174 MB/s) == Last Cycle's Post Read Time : 39:51:05 (69 MB/s) == Last Cycle's Total Time : 75:48:53 == == Total Elapsed Time 75:48:53 == == Disk Start Temperature: 32C == == Current Disk Temperature: -->42<--C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sda /tmp/smart_finish_sda ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 83 100 44 ok 223599568 Seek_Error_Rate = 74 100 45 ok 25261913 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 High_Fly_Writes = 98 100 0 ok 2 Airflow_Temperature_Cel = 58 68 40 near_thresh 42 Temperature_Celsius = 42 32 0 ok 42 Hardware_ECC_Recovered = 8 100 0 near_thresh 223599568 ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 044 Pre-fail Always - 609120 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 4 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 045 Pre-fail Always - 10455 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 0 (170 224 0) 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 4 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 068 068 040 Old_age Always - 32 (Min/Max 32/32) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 5 194 Temperature_Celsius 0x0022 032 040 000 Old_age Always - 32 (0 22 0 0 0) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 609120 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 94686849007616 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 192 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 608928 Unfortunately, I used a different enclosure for the 2nd HDD and therefore I wasn't able to get any SMART values. Since no sectors were pending I just assumed the disk is fine and installed it in the NAS.

I just ordered two a few days ago. Sadly amazon doesn't have a shipping date yet. Will post the preclear results once I got them.

Thanks for the response. Not really good news though I hope that more people will buy the drive to see if this is normal behavior for the drive or not. I'm planning to buy two more of those until the end of the year, but they are damn expensive^^

preclear is finished: ========================================================================1.15 == invoked as: ./preclear_disk.sh /dev/sdc == ST10000VN0004-1ZD101 ZA206B9L == Disk /dev/sdc has been successfully precleared == with a starting sector of 1 == Ran 1 cycle == == Using :Read block size = 1003520 Bytes == Last Cycle's Pre Read Time : 19:51:21 (139 MB/s) == Last Cycle's Zeroing time : 15:50:45 (175 MB/s) == Last Cycle's Post Read Time : 39:39:30 (70 MB/s) == Last Cycle's Total Time : 75:22:36 == == Total Elapsed Time 75:22:36 == == Disk Start Temperature: 33C == == Current Disk Temperature: -->43<--C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdc /tmp/smart_finish_sdc ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 83 100 44 ok 208480736 Seek_Error_Rate = 74 100 45 ok 25147894 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 High_Fly_Writes = 96 100 0 ok 4 Airflow_Temperature_Cel = 57 67 40 near_thresh 43 Temperature_Celsius = 43 33 0 ok 43 Hardware_ECC_Recovered = 9 100 0 near_thresh 208480736 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================

Results of the 10TB ironwolf drive: rpt: ========================================================================1.15 == invoked as: ./preclear_disk.sh /dev/sdc == ST10000VN0004-1ZD101 XXX == Disk /dev/sdc has been successfully precleared == with a starting sector of 1 == Ran 1 cycle == == Using :Read block size = 1003520 Bytes == Last Cycle's Pre Read Time : 19:51:21 (139 MB/s) == Last Cycle's Zeroing time : 15:50:45 (175 MB/s) == Last Cycle's Post Read Time : 39:39:30 (70 MB/s) == Last Cycle's Total Time : 75:22:36 == == Total Elapsed Time 75:22:36 == == Disk Start Temperature: 33C == == Current Disk Temperature: -->43<--C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdc /tmp/smart_finish_sdc ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 83 100 44 ok 208480736 Seek_Error_Rate = 74 100 45 ok 25147894 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 High_Fly_Writes = 96 100 0 ok 4 Airflow_Temperature_Cel = 57 67 40 near_thresh 43 Temperature_Celsius = 43 33 0 ok 43 Hardware_ECC_Recovered = 9 100 0 near_thresh 208480736 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ finish: Disk: /dev/sdc smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.1.18-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST10000VN0004-1ZD101 Firmware Version: SC60 User Capacity: 10,000,831,348,736 bytes [10.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 (unknown minor revision code: 0x006d) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Aug 21 08:27:28 2016 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 884) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 083 064 044 Pre-fail Always - 208480736 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 074 060 045 Pre-fail Always - 25147894 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 76 (90 57 0) 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 1 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 096 096 000 Old_age Always - 4 190 Airflow_Temperature_Cel 0x0022 057 056 040 Old_age Always - 43 (Min/Max 26/44) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 988 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 6 194 Temperature_Celsius 0x0022 043 044 000 Old_age Always - 43 (0 26 0 0 0) 195 Hardware_ECC_Recovered 0x001a 009 008 000 Old_age Always - 208480736 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 129063767244875 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 19533649576 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 59746352120 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. start: Disk: /dev/sdc smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.1.18-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST10000VN0004-1ZD101 Firmware Version: SC60 User Capacity: 10,000,831,348,736 bytes [10.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 (unknown minor revision code: 0x006d) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Aug 18 05:04:51 2016 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 884) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 044 Pre-fail Always - 2138040 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 045 Pre-fail Always - 88265 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1 (61 2 0) 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 1 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 067 067 040 Old_age Always - 33 (Min/Max 26/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 6 194 Temperature_Celsius 0x0022 033 040 000 Old_age Always - 33 (0 26 0 0 0) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 2138040 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 97654671409152 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 775800 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1362240 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. How does it look? Should I be worried about the "near threshold" values?

Got the drive today, running the preclearing now. Will report back when it is finished. See you in a few months

I just ordered one. I don't have an unRaid server anymore, but I still got a spare license. Will hook it up to my Laptop via USB docking station and will post preclear results. how much did that cost you? I ordered it on Amazon.de (had some coupons left) where it is 469€. Lowest price in Germany is around 440€ at the moment. It fell pretty fast after launch, but it seems to be stable at this price for now.

I just ordered one. I don't have an unRaid server anymore, but I still got a spare license. Will hook it up to my Laptop via USB docking station and will post preclear results.

Just want to let you know that version v1.10.1 (10.8.2016) is out. Changelog: Improved support for BD-Java discs. Still works reliably only when opening the original disc or encrypted backup (not a decrypted backup). Added support for DD+ dependent streams, previously DD+ 7.1 extension streams were incorrectly identified as independent 4.0 audio MakeMKV now saves additional metadata information when making a full-disc backup, to preserve all BD-Java related info Bug fixes:Mac OS X: Program could hang in "Please install Java" dialog, even if Java was installed

Thanks for the information and explanation! I will have a look at the docker file and will see if I can get the needed information from it.

I'm sorry if this question has been asked already, but I couldn't find anything helpful. I installed the CA and turned on additional search results on Docker Hub Searching. I want to install the docker explorer by cloneme (https://hub.docker.com/r/cloneme/explorer/). The installation went fine, but I don't have the option to start the webGUI when going to the docker section on unraid. I guess this is most likely due to the fact that there are no port or volume mappings setup. So I guess I have to set it up manually. Unfortunately, I don't really know how to start. The only thing that would seem right is the port 4859, but that's about it. Would appreciate any help to point me in the right direction.

That sounds really terrible. Not many users here are using this case, but the few threads on it are largely positive. I'm planning an unraid server with that case, after reading your post I'm not so sure anymore.

It was updated 7 days ago Thanks! I didn't see a changelog in your second post and I didn't look further.

Just fyi: Makemkv has been updated. MakeMKV v1.9.10 (17.4.2016 ) Added support for AACS v60 Small miscellaneous improvements and bugfixes

Yes I installed it. I found an option "Wait for all downloads to be fninished:" , this was "on". So I tunred it off, but nothin changes. Later I will reboot my server, maybe this helps After reboot: "ExtractArchive: Check package XXXX" And that's it, nothing happens

Yeah really? Mine not -.- It says: "....queued for later extracting" Even with small files....damn it! Did you changed something in the settings for extraction?

Okay I did so. Version is fixed. Thanks!

I can not download with pyload anymore... /etc/rc.d/unraid.d/rc.unraid_pyload version gives me: /etc/rc.d/unraid.d/rc.unraid_pyload: line 52: /mnt/cache/.pyload/pyLoadCore.py: Permission denied Pyload logs says: Couldn't connect to host or connection reset, waiting 1 minute and retry. But I have an internet connection. Tried it with different hosters, same result.

The new .conf file is attached to the first post. You will probably have to grab it from there until it can be updated in unMenu itself. Me idiot...Thanks for your help! It's now working.

Done That was fast! I updated unmenu, restarted it, but no version 0.4.9. What am I doing wrong here? Yes! The old one was very bad. I hope this one works better.

A new Version is out 0.4.9. Please udate it at unmenu.

Same problem here. It works with files below 2gb fine. But bigger files does not work. Its known by the pyload team but they do not do anything about it. Some use a script. Just look at the forum. I think it has something to do with ram or cpu usage. Maybe unrar does not get the ressources it needs.

There is a new version available. Can u integrate it in ummenu?

Thanks! So i have to buy a new PSU to expand my array:(

Yeah forgot that to write. At the beginning I never thought that I will have so many HDDs! So add HDDs is expensive for me because of the Power supply and a cage Can you estimate how many drives it can handle? Can I add one more without problems? Thanks for your comment, very appreciated The USB stick is a good point, I think I have to use one of the back ports.