Sledgehamma

Members
  • Posts

    72
  • Joined

  • Last visited

Everything posted by Sledgehamma

  1. There might be several reasons as to why repurpose the Qnap NAS. -Security. See for example here: https://www.techradar.com/news/qnap-raises-alarm-over-serious-vulnerability-in-nas-devices -Qnap depends on raid for redundancy and therefore all the drive are spinning for read write operations -While you can run Docker on Qnap fine, its clumsy to use and update -Qnap NAS are already build, no need to select the hardware yourself and build it. Just buy it, remove the DOM and you can run unRaid -Typically low power draw
  2. Shop: mindfactory.de valid until: 25.7. link: https://www.mindfactory.de/DAMN#minddeal_394 16TB Exos for 329€, 200 units remaining 18 TB Exos for 399€, 40 units remaining Prices are without shipping. I don’t know whether they ship outside Germany or not. keep in mind that the order is limited to 2 units per order. Great prices considering what’s currently going on (Chia, COVID, floods, …).
  3. Just those two NVMe drives for this purpose.
  4. I'm currently planing my next build and there is just one open question remaining. Relevant hardware would be as follows: AMD Ryzen 3600 or 5600X depending on price and availability ASROck Rack X570D4U-2L2T 2x 1TB Seagate FireCuda 530 (7.300MB/s read, 6.000MB/s write) My specific use case is remuxing (UHD) BDs to mkv with a makeMKV Docker. So the question is whether it's faster to read the full BD from one SSD and write to another one (cache of the array) or having both SSDs in raid 0 so that the Docker will simultaneously read and write from that cache drive. With the first method I will get the maximum read and write speed of that specific drive. I’m not sure whether there will be a bottleneck when there is simultaneous read and write to the SSDs as it’s the case for the raid 0 option. If not then it should be faster and I’m also more flexible in storage capacity. Thanks for any insights!
  5. I might have to considering current HDD prices :(
  6. I was super exited until I read that they use PCIe 3.0 Otherwise the GE series with its 35W TDP would be ideal for my next project.
  7. Would a USB DOM work? something like this: https://www.ebay.de/itm/2GB-Innodisk-USB-EDC-Flash-Modul-Vertical-DEUX-02GU51C1S-DOM-Pinheader-10-Pin/313361711768?hash=item48f5d04298:g:Bq4AAOSw~rpf6i-j
  8. I'm thinking about getting it myself. How did your tests go?
  9. Jap, bin auf github. Selber alias wie hier.
  10. Ich könnte auch noch helfen, falls Bedarf besteht.
  11. After investigating some more, here are my findings: Xpenology Docker is basically 3 years old. Not sure if it still works Xpenology as a VM seems to work, but you can't load your unRaid shares directly. You have to mount them via virtual network and the speed is not optimal Nextcloud Docker and external storage: You can directly mount your shares inside the Docker and move files via App or Webgui. So this is the best solution imho. Comes extremely close to apps for Qnap and Synology.
  12. I really don't understand the negativity against this feature. Why shouldn't the solution be pretty or even elegant? Just look at how awesome the current webui of unRaid looks in contrast to a few years. All the suggested solutions (MC, Dolphin, Krusader) are horrible and ancient to use if you ever used Qnap or Synology (even low cost WD offers this). Then there are people saying that unRaid is lightweight. Look at all the features that unRaid added over the years. That's not light anymore, either. But it's awesome that this OS offers so many features. I think the best solution for now is using XPEnology inside a VM (which is definitely anything but lightweight) and then using the webui or the apps for file management. Is anybody using is already for this exact purpose? Would love to hear your experience. I personally don't even need file management inside the webui, apps for tablets and smartphone would be enough.
  13. Not of everything. Just the most important stuff. This is the log: ############################################################################################################################ # # # unRAID Server Preclear of disk ZA20SNEN # # Cycle 1 of 1, partition start on sector 64. # # # # # # Step 1 of 5 - Pre-read verification: [14:49:38 @ 187 MB/s] SUCCESS # # Step 2 of 5 - Zeroing the disk: [14:52:22 @ 186 MB/s] SUCCESS # # Step 3 of 5 - Writing unRAID's Preclear signature: SUCCESS # # Step 4 of 5 - Verifying unRAID's Preclear signature: SUCCESS # # Step 5 of 5 - Post-Read verification: [14:59:28 @ 185 MB/s] SUCCESS # # # # # # # # # # # # # # # ############################################################################################################################ # Cycle elapsed time: 44:41:36 | Total elapsed time: 44:41:36 # ############################################################################################################################ ############################################################################################################################ # # # S.M.A.R.T. Status default # # # # # # ATTRIBUTE INITIAL CYCLE 1 STATUS # # 5-Reallocated_Sector_Ct 0 0 - # # 9-Power_On_Hours 2 47 Up 45 # # 184-End-to-End_Error 0 0 - # # 187-Reported_Uncorrect 0 0 - # # 190-Airflow_Temperature_Cel 31 38 Up 7 # # 197-Current_Pending_Sector 0 0 - # # 198-Offline_Uncorrectable 0 0 - # # 199-UDMA_CRC_Error_Count 0 0 - # # # # # # # # # ############################################################################################################################ # SMART overall-health self-assessment test result: PASSED # ############################################################################################################################ The pre-fail stats worry me, but apparently this is normal for these Seagate drives.... Some more: 1 Raw read error rate 0x000f 084 076 044 Pre-fail Always Never 226590880 3 Spin up time 0x0003 097 097 000 Pre-fail Always Never 0 4 Start stop count 0x0032 100 100 020 Old age Always Never 2 5 Reallocated sector count 0x0033 100 100 010 Pre-fail Always Never 0 7 Seek error rate 0x000f 072 061 045 Pre-fail Always Never 17769826 9 Power on hours 0x0032 100 100 000 Old age Always Never 47 (27 139 0) 10 Spin retry count 0x0013 100 100 097 Pre-fail Always Never 0 12 Power cycle count 0x0032 100 100 020 Old age Always Never 2 184 End-to-end error 0x0032 100 100 099 Old age Always Never 0 187 Reported uncorrect 0x0032 100 100 000 Old age Always Never 0 188 Command timeout 0x0032 100 100 000 Old age Always Never 0 189 High fly writes 0x003a 086 086 000 Old age Always Never 14 190 Airflow temperature cel 0x0022 066 060 040 Old age Always Never 34 (min/max 31/40) 191 G-sense error rate 0x0032 100 100 000 Old age Always Never 1334 192 Power-off retract count 0x0032 100 100 000 Old age Always Never 0 193 Load cycle count 0x0032 100 100 000 Old age Always Never 6 194 Temperature celsius 0x0022 034 040 000 Old age Always Never 34 (0 31 0 0 0) 195 Hardware ECC recovered 0x001a 009 009 000 Old age Always Never 226590880 197 Current pending sector 0x0012 100 100 000 Old age Always Never 0 198 Offline uncorrectable 0x0010 100 100 000 Old age Offline Never 0 199 UDMA CRC error count 0x003e 200 200 000 Old age Always Never 0 200 Multi zone error rate 0x0023 100 100 001 Pre-fail Always Never 0 240 Head flying hours 0x0000 100 253 000 Old age Offline Never 44 (255 171 0) 241 Total lbas written 0x0000 100 253 000 Old age Offline Never 19532877856 242 Total lbas read 0x0000 100 253 000 Old age Offline Never 39065775616
  14. Sorry for my late reply. Thank you very much! My fourth IronWolf is preclearing now. This time I'm using the preclear plugin. Will post results once I get them Here are the SMART reports of my three drives after using them for a few months. They have been on 24/7 and with the purchase of my third drive the setup is Raid5. I hope this is not considered as offtopic.
  15. My 3rd Seagate 10TB IronWolf: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 083 064 044 Pre-fail Always - 223599568 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 4 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 074 060 045 Pre-fail Always - 25261913 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 76 (206 164 0) 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 4 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2 190 Airflow_Temperature_Cel 0x0022 058 057 040 Old_age Always - 42 (Min/Max 32/43) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1200 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 5 194 Temperature_Celsius 0x0022 042 043 000 Old_age Always - 42 (0 22 0 0 0) 195 Hardware_ECC_Recovered 0x001a 008 008 000 Old_age Always - 223599568 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 114022791774283 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 19532873968 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 59745589152 == Using :Read block size = 1003520 Bytes == Last Cycle's Pre Read Time : 19:59:44 (138 MB/s) == Last Cycle's Zeroing time : 15:57:04 (174 MB/s) == Last Cycle's Post Read Time : 39:51:05 (69 MB/s) == Last Cycle's Total Time : 75:48:53 == == Total Elapsed Time 75:48:53 == == Disk Start Temperature: 32C == == Current Disk Temperature: -->42<--C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sda /tmp/smart_finish_sda ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 83 100 44 ok 223599568 Seek_Error_Rate = 74 100 45 ok 25261913 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 High_Fly_Writes = 98 100 0 ok 2 Airflow_Temperature_Cel = 58 68 40 near_thresh 42 Temperature_Celsius = 42 32 0 ok 42 Hardware_ECC_Recovered = 8 100 0 near_thresh 223599568 ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 044 Pre-fail Always - 609120 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 4 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 045 Pre-fail Always - 10455 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 0 (170 224 0) 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 4 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 068 068 040 Old_age Always - 32 (Min/Max 32/32) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 5 194 Temperature_Celsius 0x0022 032 040 000 Old_age Always - 32 (0 22 0 0 0) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 609120 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 94686849007616 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 192 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 608928 Unfortunately, I used a different enclosure for the 2nd HDD and therefore I wasn't able to get any SMART values. Since no sectors were pending I just assumed the disk is fine and installed it in the NAS.
  16. I just ordered two a few days ago. Sadly amazon doesn't have a shipping date yet. Will post the preclear results once I got them.
  17. Thanks for the response. Not really good news though I hope that more people will buy the drive to see if this is normal behavior for the drive or not. I'm planning to buy two more of those until the end of the year, but they are damn expensive^^
  18. preclear is finished: ========================================================================1.15 == invoked as: ./preclear_disk.sh /dev/sdc == ST10000VN0004-1ZD101 ZA206B9L == Disk /dev/sdc has been successfully precleared == with a starting sector of 1 == Ran 1 cycle == == Using :Read block size = 1003520 Bytes == Last Cycle's Pre Read Time : 19:51:21 (139 MB/s) == Last Cycle's Zeroing time : 15:50:45 (175 MB/s) == Last Cycle's Post Read Time : 39:39:30 (70 MB/s) == Last Cycle's Total Time : 75:22:36 == == Total Elapsed Time 75:22:36 == == Disk Start Temperature: 33C == == Current Disk Temperature: -->43<--C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdc /tmp/smart_finish_sdc ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 83 100 44 ok 208480736 Seek_Error_Rate = 74 100 45 ok 25147894 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 High_Fly_Writes = 96 100 0 ok 4 Airflow_Temperature_Cel = 57 67 40 near_thresh 43 Temperature_Celsius = 43 33 0 ok 43 Hardware_ECC_Recovered = 9 100 0 near_thresh 208480736 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================
  19. Results of the 10TB ironwolf drive: rpt: ========================================================================1.15 == invoked as: ./preclear_disk.sh /dev/sdc == ST10000VN0004-1ZD101 XXX == Disk /dev/sdc has been successfully precleared == with a starting sector of 1 == Ran 1 cycle == == Using :Read block size = 1003520 Bytes == Last Cycle's Pre Read Time : 19:51:21 (139 MB/s) == Last Cycle's Zeroing time : 15:50:45 (175 MB/s) == Last Cycle's Post Read Time : 39:39:30 (70 MB/s) == Last Cycle's Total Time : 75:22:36 == == Total Elapsed Time 75:22:36 == == Disk Start Temperature: 33C == == Current Disk Temperature: -->43<--C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdc /tmp/smart_finish_sdc ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 83 100 44 ok 208480736 Seek_Error_Rate = 74 100 45 ok 25147894 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 High_Fly_Writes = 96 100 0 ok 4 Airflow_Temperature_Cel = 57 67 40 near_thresh 43 Temperature_Celsius = 43 33 0 ok 43 Hardware_ECC_Recovered = 9 100 0 near_thresh 208480736 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ finish: Disk: /dev/sdc smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.1.18-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST10000VN0004-1ZD101 Firmware Version: SC60 User Capacity: 10,000,831,348,736 bytes [10.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 (unknown minor revision code: 0x006d) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Aug 21 08:27:28 2016 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 884) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 083 064 044 Pre-fail Always - 208480736 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 074 060 045 Pre-fail Always - 25147894 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 76 (90 57 0) 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 1 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 096 096 000 Old_age Always - 4 190 Airflow_Temperature_Cel 0x0022 057 056 040 Old_age Always - 43 (Min/Max 26/44) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 988 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 6 194 Temperature_Celsius 0x0022 043 044 000 Old_age Always - 43 (0 26 0 0 0) 195 Hardware_ECC_Recovered 0x001a 009 008 000 Old_age Always - 208480736 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 129063767244875 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 19533649576 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 59746352120 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. start: Disk: /dev/sdc smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.1.18-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST10000VN0004-1ZD101 Firmware Version: SC60 User Capacity: 10,000,831,348,736 bytes [10.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 (unknown minor revision code: 0x006d) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Aug 18 05:04:51 2016 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 884) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 044 Pre-fail Always - 2138040 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 045 Pre-fail Always - 88265 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1 (61 2 0) 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 1 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 067 067 040 Old_age Always - 33 (Min/Max 26/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 6 194 Temperature_Celsius 0x0022 033 040 000 Old_age Always - 33 (0 26 0 0 0) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 2138040 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 97654671409152 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 775800 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1362240 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. How does it look? Should I be worried about the "near threshold" values?
  20. Got the drive today, running the preclearing now. Will report back when it is finished. See you in a few months
  21. I just ordered one. I don't have an unRaid server anymore, but I still got a spare license. Will hook it up to my Laptop via USB docking station and will post preclear results. how much did that cost you? I ordered it on Amazon.de (had some coupons left) where it is 469€. Lowest price in Germany is around 440€ at the moment. It fell pretty fast after launch, but it seems to be stable at this price for now.
  22. I just ordered one. I don't have an unRaid server anymore, but I still got a spare license. Will hook it up to my Laptop via USB docking station and will post preclear results.