IGHOR

Thats nice, but is there a chance you may not be able to do it some times? I mean we could get long delays in some reasons. Can you make build fully automated once new version released without your interaction?

Logitech Webcam C170 I mean can I install single driver for my device from libreelec and another single webcam driver from DigitalDevices? Hm, as I remember while used 6.9.0 I had kernel version 5.10.21, so with updating to 6.9.1 no kernel version changed. Maybe I'm mistaken, but anyway 6.9.1 working fine for me with that DVB plugin (libreelec) right now.

My DVB card works fine with Libreelec, but WebCam doesn't Also with Digital Devices WebCam works fine, but DVB not. Is there a way to install selected drivers only? PS: by the way, updated to 6.9.1, since kernel version is the same, everything works fine as before for my card Hauppauge WinTV-dualHD DVB (except webcam of course).

+1

Is there a way to install Logitech Webcam C170 driver in to the unRAID?

I had some problems with HDD, so I got lots of UDMA CRC errors. It is visible in the UI. Then i have replaced SATA cable and HDD become work again as usual, so the problem was in the bad SATA cable. Unraid status for the HDD shows "error" now, even if I'm sure it was false alarm. Is there a way to ignore that error (save current CRC error count as normal) and make Unraid to show status "healthy" again? It would be useful since if there will be more real UDMA CRC errors, I'll see no difference in the UI, since it will be "error" just like before.

Looks like your file /boot/config/plugins/speedtest/speedtest.xml is corrupted. You can just remove it, it is the history of speedtest. It will create new one.

Also I can't stop the array, it stuck on the message "Array Stopping•Retry unmounting user share(s)..."

I can't do it since my PC is at home, and I far away from there. One more I can tell, that plugins disappearing on reboot, for example Preclear Disk, so I have to install it again on each reboot. Also Nerd Pack persists, but its modules not being installed on reboot, but settings are saved and enabled for the packages I need.

No changes. ps aux | grep emhttp - not found and the web interface is not accessible until I manually start that script

Thanks for the answer, here it is julynas-diagnostics-20200625-1524.zip

I do have problem. unRAID stopped to start after some hard reset, electricity problems. I notice that /boot/config/go being ignored and if I execute it via SSH, unRAID starts as usual. I tried to add as first command of the go file 'echo asdf > /test_boot' that confirmed, file not existed after reboot, but appeared when I manually start the go file. So /boot/config/go is completely ignored at boot. How can I debug and fix it? Running unRAID Version: 6.8.3

Read-only file system, looks like without modifying bzmodules file there is no way

I got it already. And I understand, I would just add script that doing it to my config at boot. So it may work? Worth to try?

If I just copy module from LibreELECT unRAID version to official one, will it work with modprobe command at boot?

I do have Hauppauge WinTV-dualHD Dual Tuner that works great with LibreELEC drivers. I also have Logitech C170 web camera, and I would like to use it, but with LibreELEC drivers it gives error: [video4linux2,v4l2 @ 0x55ee04fa7700] ioctl(VIDIOC_STREAMON): No space left on device /dev/video0: No space left on device If I use any of other of two DVB drivers, this web camera works fine, but Hauppauge WinTV-dualHD Dual Tuner disappears and it works only with the LibreELEC driver. Any advice how to make to work that two devices at the same time?

Hello. I'm trying to connect USB web camera to my VM, and it does work, but looks like very slow since image lost every few seconds. In the VM I can find that USB device and it says it is connected to USB 2.0, but it looks like speed of USB 1.1 I think if it would be possible to enable IOMMU it would fix problem, but I hope there is some another way. In the VM settings I can find USB Devices: Logitech Webcam C170 (046d:082b). By enabling its checkbox I attach the web camera. Other devices that don't need a high speed works fine this way. Here is my System Devices info and I'm trying to passthrough Logitech, Inc. Webcam C170. Is there any additional QEMU commands that would help me to fix performance issue? System Devices PCI Devices and IOMMU Groups [8086:2e20] 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) [8086:3a37] 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a38] 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a39] 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a3c] 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3e] 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a40] 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a4a] 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a34] 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a35] 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a36] 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a3a] 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:244e] 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) [8086:3a18] 00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a22] 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a30] 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [10ec:8168] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) USB Devices Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 046d:082b Logitech, Inc. Webcam C170 Bus 001 Device 004: ID 13fe:5500 Kingston Technology Company Inc. Silicon-Power16G Bus 001 Device 005: ID 2040:0265 Hauppauge dualHD Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0d9f:0002 Powercom Co., Ltd Black Knight PRO / WOW Uninterruptible Power Supply (Cypress HID->COM RS232) Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 002: ID 1130:f211 Tenx Technology, Inc. TP6911 Audio Headset

Yes you can downgrade, it works fine.

Is there any instructions how to build DVB kernel for 6.8.3?

Hello. Is it going to be updated to 6.8.3?

virtio is now supported in recent macOS. Works fine with disks. Anyone got it working with network adapter?

Thank you, it is very nice channel. I didn't know that it is possible to use Time Machine with SMB directly using unRAID

Thanks, but I don't think it is related to unRAID. I got the answer I asked about AFP, my mistake was that I googled AFC instead, so I found nothing.

I tried it some time ago, many tries. I got never finished my Time Machine backup over SMB this way. Well, will do it in other way.

Thanks, but it says AFP won't work on APFS volume that have no relation to unRAID. Time Machine remains to work on AFP in Time Capsule, so why to remove it from unRAID? Here is confirmation that AFP is deprecated https://developer.apple.com/library/archive/documentation/FileManagement/Conceptual/APFS_Guide/FAQ/FAQ.html