RISO

What do you mean with both Digital Devices builds?

Hello, I updated yesterday from version 6.6.6 to 6.7.0RC4 and I noticed that the drivers are detected wrong. I have a Digital Devices Cine C/C2/T/T2 V7, but Sony CXD2843ER DVB-T/T2/C/C2 demodulator is detected. TVH always says that no free tuner is available. Best regards Riso

Thanks also to you Djoss

to Yes. Switched it to Auto and it works. Thanks jonathanm. Can you explain why?

Yes, of course. I restored to the default version 6.5.3. I've done several tests but all without success. Again the only way was not to use the /mnt/user/ shares.

correctly, as soon as I place the config under /mnt/user it doesn't work. I have as good as the last release. I have version 6.5.3, but I use the unRAID DVB Edition plugin. I need the Digital Devices 6.5.3-rc1 build to pass my DVB card to TVHeadEnd.

In the appdata share there are 3 more containers running without problems. My array is formatted with xfs My cache pool consists of 2 devices with btrfs formatted. I have created another share with the same settings as the appdata share. JD crashes. A new share created without cache. JD crashes. Creating a folder on the stick via shell "/JD2" works without problems Create a folder over the shell under "/mnt/disk1/JD2", works without problems Is btrfs not supported?

I uploaded a picture with my config.

You're right. If I use /tmp/JDownloader2 it works without problems. But I can't figure out why. I compared the rights of the two folder and couldn't see any difference. Maybe it has to do with that I have executed the "Tools/New Permissions" script some time ago appdata path = /mnt/user/appdata/JDownloader2

This is the content of the log file: mmap failed for CEN and END part of zip file mmap failed for CEN and END part of zip file Error: An unexpected error occurred while trying to open file /config/JDownloader.jar

Hi Djoss the configuration has the default values everywhere. What I have set is the output path and the network on bridge.

Hello folks, I just can't get the JD2 container to work. It starts and ends after a few seconds. I can't find any errors in the logs either. [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 00-app-niceness.sh: executing... [cont-init.d] 00-app-niceness.sh: exited 0. [cont-init.d] 00-app-script.sh: executing... [cont-init.d] 00-app-script.sh: exited 0. [cont-init.d] 00-app-user-map.sh: executing... [cont-init.d] 00-app-user-map.sh: exited 0. [cont-init.d] 00-clean-logmonitor-states.sh: executing... [cont-init.d] 00-clean-logmonitor-states.sh: exited 0. [cont-init.d] 00-clean-tmp-dir.sh: executing... [cont-init.d] 00-clean-tmp-dir.sh: exited 0. [cont-init.d] 00-set-app-deps.sh: executing... [cont-init.d] 00-set-app-deps.sh: exited 0. [cont-init.d] 00-set-home.sh: executing... [cont-init.d] 00-set-home.sh: exited 0. [cont-init.d] 00-take-config-ownership.sh: executing... [cont-init.d] 00-take-config-ownership.sh: exited 0. [cont-init.d] 10-certs.sh: executing... [cont-init.d] 10-certs.sh: exited 0. [cont-init.d] 10-cjk-font.sh: executing... [cont-init.d] 10-cjk-font.sh: exited 0. [cont-init.d] 10-nginx.sh: executing... [cont-init.d] 10-nginx.sh: exited 0. [cont-init.d] 10-vnc-password.sh: executing... [cont-init.d] 10-vnc-password.sh: exited 0. [cont-init.d] 10-web-index.sh: executing... [cont-init.d] 10-web-index.sh: exited 0. [cont-init.d] jdownloader2.sh: executing... [cont-init.d] jdownloader2.sh: exited 0. [cont-init.d] done. [services.d] starting services [services.d] starting s6-fdholderd... [services.d] starting certsmonitor... [services.d] starting nginx... [services.d] starting xvfb... [nginx] starting... [certsmonitor] disabling service: secure connection not enabled. [xvfb] starting... [services.d] starting logmonitor... [services.d] starting statusmonitor... [statusmonitor] no file to monitor: disabling service... [services.d] starting x11vnc... [services.d] starting openbox... [openbox] starting... [x11vnc] starting... [logmonitor] no file to monitor: disabling service... 02/08/2018 17:48:04 passing arg to libvncserver: -rfbport 02/08/2018 17:48:04 passing arg to libvncserver: 5900 02/08/2018 17:48:04 passing arg to libvncserver: -rfbportv6 02/08/2018 17:48:04 passing arg to libvncserver: 5900 02/08/2018 17:48:04 passing arg to libvncserver: -desktop 02/08/2018 17:48:04 passing arg to libvncserver: JDownloader 2 02/08/2018 17:48:04 x11vnc version: 0.9.14 lastmod: 2015-11-14 pid: 768 02/08/2018 17:48:04 Using X display :0 02/08/2018 17:48:04 rootwin: 0x43 reswin: 0x200001 dpy: 0x8bef3a40 02/08/2018 17:48:04 02/08/2018 17:48:04 ------------------ USEFUL INFORMATION ------------------ 02/08/2018 17:48:04 X DAMAGE available on display, using it for polling hints. 02/08/2018 17:48:04 To disable this behavior use: '-noxdamage' 02/08/2018 17:48:04 02/08/2018 17:48:04 Most compositing window managers like 'compiz' or 'beryl' 02/08/2018 17:48:04 cause X DAMAGE to fail, and so you may not see any screen 02/08/2018 17:48:04 updates via VNC. Either disable 'compiz' (recommended) or 02/08/2018 17:48:04 supply the x11vnc '-noxdamage' command line option. 02/08/2018 17:48:04 X COMPOSITE available on display, using it for window polling. 02/08/2018 17:48:04 To disable this behavior use: '-noxcomposite' 02/08/2018 17:48:04 02/08/2018 17:48:04 Wireframing: -wireframe mode is in effect for window moves. 02/08/2018 17:48:04 If this yields undesired behavior (poor response, painting 02/08/2018 17:48:04 errors, etc) it may be disabled: 02/08/2018 17:48:04 - use '-nowf' to disable wireframing completely. 02/08/2018 17:48:04 - use '-nowcr' to disable the Copy Rectangle after the 02/08/2018 17:48:04 moved window is released in the new position. 02/08/2018 17:48:04 Also see the -help entry for tuning parameters. 02/08/2018 17:48:04 You can press 3 Alt_L's (Left "Alt" key) in a row to 02/08/2018 17:48:04 repaint the screen, also see the -fixscreen option for 02/08/2018 17:48:04 periodic repaints. 02/08/2018 17:48:04 GrabServer control via XTEST. 02/08/2018 17:48:04 02/08/2018 17:48:04 Scroll Detection: -scrollcopyrect mode is in effect to 02/08/2018 17:48:04 use RECORD extension to try to detect scrolling windows 02/08/2018 17:48:04 (induced by either user keystroke or mouse input). 02/08/2018 17:48:04 If this yields undesired behavior (poor response, painting 02/08/2018 17:48:04 errors, etc) it may be disabled via: '-noscr' 02/08/2018 17:48:04 Also see the -help entry for tuning parameters. 02/08/2018 17:48:04 You can press 3 Alt_L's (Left "Alt" key) in a row to 02/08/2018 17:48:04 repaint the screen, also see the -fixscreen option for 02/08/2018 17:48:04 periodic repaints. 02/08/2018 17:48:04 02/08/2018 17:48:04 XKEYBOARD: number of keysyms per keycode 7 is greater 02/08/2018 17:48:04 than 4 and 51 keysyms are mapped above 4. 02/08/2018 17:48:04 Automatically switching to -xkb mode. 02/08/2018 17:48:04 If this makes the key mapping worse you can 02/08/2018 17:48:04 disable it with the "-noxkb" option. 02/08/2018 17:48:04 Also, remember "-remap DEAD" for accenting characters. 02/08/2018 17:48:04 02/08/2018 17:48:04 X FBPM extension not supported. 02/08/2018 17:48:04 X display is not capable of DPMS. 02/08/2018 17:48:04 -------------------------------------------------------- 02/08/2018 17:48:04 02/08/2018 17:48:04 Default visual ID: 0x21 02/08/2018 17:48:04 Read initial data from X display into framebuffer. 02/08/2018 17:48:04 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/5120 02/08/2018 17:48:04 02/08/2018 17:48:04 X display :0 is 32bpp depth=24 true color 02/08/2018 17:48:04 02/08/2018 17:48:04 ListenOnTCPPort: Address in use 02/08/2018 17:48:04 Listening only on IPv6 port 5900 (socket 9) 02/08/2018 17:48:04 02/08/2018 17:48:04 Xinerama is present and active (e.g. multi-head). 02/08/2018 17:48:04 Xinerama: number of sub-screens: 1 02/08/2018 17:48:04 Xinerama: no blackouts needed (only one sub-screen) 02/08/2018 17:48:04 02/08/2018 17:48:04 fb read rate: 2154 MB/sec 02/08/2018 17:48:04 fast read: reset -wait ms to: 10 02/08/2018 17:48:04 fast read: reset -defer ms to: 10 02/08/2018 17:48:04 The X server says there are 10 mouse buttons. 02/08/2018 17:48:04 Info: listening only on IPv6 interface. 02/08/2018 17:48:04 screen setup finished. 02/08/2018 17:48:04 The VNC desktop is: unRaid:0 0 ****************************************************************************** Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet? The scheme stores pixel data offscreen on the VNC viewer side for faster retrieval. It should work with any VNC viewer. Try it by running: x11vnc -ncache 10 ... One can also add -ncache_cr for smooth 'copyrect' window motion. More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching Openbox-Message: Openbox was compiled without image loading support. Icons in menus will not be loaded. [services.d] starting app... [app] starting JDownloader 2... [services.d] done. [jdsupervisor] JDownloader2 not started yet. Proceeding... [jdsupervisor] JDownloader2 no longer running. Exiting... [services.d] stopping services [services.d] stopping app... [services.d] stopping openbox... [services.d] stopping x11vnc... caught signal: 15 02/08/2018 17:48:12 deleted 40 tile_row polling images. [services.d] stopping statusmonitor... [services.d] stopping logmonitor... [services.d] stopping xvfb... [services.d] stopping nginx... [services.d] stopping certsmonitor... [services.d] stopping s6-fdholderd... [cont-finish.d] executing container finish scripts... [cont-finish.d] done. [s6-finish] syncing disks. [s6-finish] sending all processes the TERM signal. [s6-finish] sending all processes the KILL signal and exiting.