zolle76

First of all, thx for the plugin! I'm no expert, and I've been trying to get this to life with a bunch of web apps such as drupal or vanilla forums (wordpress works miraculously), but there's something going on with the utf8 encoding. Drupal gave me tons of errors saying something's not cool like: Warning: site:drupal.org in drupal_validate_utf8() Anyone any similar experience?

Why wouldn't it be ok to use a 5.4k disk?

Replacing the PSU fan is simple, cut the cable, solder the red with the red and the black with the black wire. You can lead the cable as show attached.

I've just replaced my fan in the PSU, it had hell of a sound. So far so good, I hope it won't melt the system, according to the specs the new fan is better than the original one. I used this one: http://skinflint.co.uk/eu/265947

You are right, the link for the bios flash is dead. Try this: http://www.avforums.com/forums/networking-nas/1521657-hp-n36l-microserver-updated-ahci-bios-support.html

You can easily flash the BIOS of the server to support 6 disks, see Jens' guide on the previous page. AFAIK PCI-E slots are backwards compatible so the x1 card should work fine in either the x4 or the x16 slot but this needs confirmation. For the Passport - I've removed a WD Disk from a MyBook Essential (WD15EARX) and it worked just fine in unRAID, so I believe it would be the same with the Passport.

You guys convinced me about not using Time Machine, instead I've set up a CCC job to run once a day. That's completely enough for me, the super important stuff is in my Dropbox anyways. I don't need version history at all.

Any Mac users?

I downloaded it with unMENU.

OK I think I managed to understand how this works. This script loops in an endless cycle and checks a few things including disk and network activity. If no activity is registered a counter starts from 45 and decreases by one each minute. Once it reaches zero a shutdown occurs. Right? Edit: it works like a charm. Even WOL is working fine from my Mac with a widget. Thanks!

That sounds OK, I have similar values on my N36L

Clean powerdown is a package from unmenu to stop the array in a controlled manner before reboot or shutdown. Even when I disabled the EM was the same. Checked the auto_s3_sleep script with -xv and it gave no error, detected the disks as idle when powered down. However the error happens when I press the Sleep button. Is there another script which is called by the "Sleep" button from the Web GUI? EDIT: Cool! I have it, it's the following: "echo -n mem >/sys/power/state" in SimpleFeatures include command.php it says "bash: echo: write error: No such device"

I know that S3 is not supported. I've removed the TCP check, and the powerDownInsteadOfSleep is enabled. Same EM. Can the Clean_Powerdown interfere with your script?

Even try FTP, I have N36L as well, and I could reach 100MB/s to a 7200 cache drive

Jens, Can you please tell me how this sleep script of your should it work? When I press the sleep button the log states it goes to sleep, and immediately wakes after. In reality nothing happens. Does this need a specific simpleFeatures package (I'm using 0.9b)? Or am I missing something? console says sh: error line 0 echo no such device or something like that thx Zoltan

Hi, I have been running unRAID for quite some time and I've read somewhere in the forums that it's better not to use the cache option for Time Machine backups. Is this true, and if so why's that? Cheers Zoltan

When I try as suggested here: http://lime-technology.com/forum/index.php?action=printpage;topic=2516.0 nohup /usr/local/sbin/emhttp & it goes into segfault

I'm running it as root, cba to mess around with users and stuff. Screen is an utility which emulates a session so you can run apps while disconnected from telnet. It's amongst the unMenu packages.

Joe, I didn't even tried to run it with the go script, since I'm not planning to reboot this box very often. The uTorrent and the TeamSpeak Server are on manual starts, TS is with screen. Works like a charm.

Hello chaps, It seems I have this problem from time to time, my unRaid web interface goes unresponsive, all other functions work flawlessly. This just happened after a fresh reboot, and I have no idea what might cause it. Again, telnet works, unMenu works, uTorrent works, TwonkyServer works, TeamSpeak Server works, built-in unRaid web interface doesn't. Any tips what to check? ps: ver 5B12a, nothing in syslog

I don't have snap installed, but when I removed the mailer script, the error still continued. Rebuilt my unraid from a backup, installed almost every package but the Transmission related ones, the error was gone. Installed Transmission, the segfaults are back.

Prostuff1, some of your packages are causing segfaults on my system at every :47 minutes, but I don't know which. I'm sure not curl, libidn or libevent. I had a break when I installed those and I didn't have the problem then. I'm not sure how to check what, some help would be appreciated. What I have in the syslog: Sep 28 21:47:01 MicroServer crond[1108]: exit status 1 from user root /usr/bin/run-parts /etc/cron.hourly 1> /dev/null Sep 28 21:47:01 MicroServer kernel: crond[18783]: segfault at b78df51c ip b78df51c sp bfbb0854 error 15 in ld-2.11.1.so[b78df000+1000] (Errors) But manually running the /usr/bin/run-parts /etc/cron.hourly 1> /dev/null gives no error

That process is quite fast. Alternatively you can start a command prompt as admin and execute the same manually.

did you do the make bootable step after formatting the thumb drive?

Anyone any tips where to check what tries to run and dies every hour? I've removed the mailer script, and it still does this.