orybrad

Thais plugin is not recognizing either one of my 3060’s. Sent from my iPhone using Tapatalk

I know. Its not recognizing either one of my 3060’s and they are both different brands and the MOBO recognizes them. They are in a x16 lane, and I am able to get video out of them it’s just unraid for some reason. Reference the pics and prev messages. Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

I have and it shows “IOMMU group 68: [10de:2504] 84:00.0 VGA compatible controller: NVIDIA Corporation Device 2504 (rev a1) [10de:228e] 84:00.1 Audio device: NVIDIA Corporation Device 228e (rev a1)” Sent from my iPhone using Tapatalk

Hi all, I have two brand new Nvidia RTX 3060’s. One is Evga and the other gigabyte brand. Neither will recognize in my unraid server but what is crazy is, I can boot up and see video the whole time. I have included a screen shot of the unraid specs screen and 4G decoding is supported by by server board. Sent from my iPhone using Tapatalk

Hi, I have had a big issue arise and ah e since downgraded back to 6.8.3 due to this. The network shares mounted over NFS and SMB between all 4 unraid servers won’t stay mounted after approximately 24 hours. I am using the Unassigned devices plugin and I had thought this as the issue so i downgraded thinking this would solve the issue and in fact I didn’t. So my resolve was to downgrade to 6.8.3 to solve this. Has anyone else had this issue and have they found a fix ? Sent from my iPhone using Tapatalk

Hi everyone, I am unable to find the “Unraid Nvidia” plugin for unraid in the community applications for download. I purchased a gpu specifically for Plex and now the plug-in is gone from the store. I am aware of the argument between the developer and unraid here recently so i am assuming it was taken down because of that. Also, I tried copying the link and manually installing the plugin. It installs but after completion I don’t get a message like In tutorials it just has “Done” and when I click that and look for it it’s nowhere to be found. So I am wandering.....has anyone been able to install this this month if so HOW! And if not, what is unraid backup plan since the developer has ditched the project? Sent from my iPhone using Tapatalk

This is just my opinion but I wouldn’t worry about it. I have 74tb in one of my unraid servers and I have never had an issue. I don’t know your hardware or how you use yours but mine I run 2 PLEX severs. One has 15 users on one account and the other 4. At any given time I can have 6-10 streams going at once and I’m transferring files along with all of this. Unraid keeps trucking right along. I have never had an issue with filling one drive up and it causing an issue with anything. Hope this helps a little at least. Sent from my iPhone using Tapatalk

Just sent that last link without reading your prev reply. Sorry. Sent from my iPhone using Tapatalk

https://www.google.com/amp/s/amp.reddit.com/r/unRAID/comments/9ncus7/is_balancing_your_drives_a_bad_idea/ Sent from my iPhone using Tapatalk

If you are using the “default” settings. Unraid writes data to each drive based on the size of that file currently being written. Check this link out: https://forums.unraid.net/topic/48118-balancing-disk-space-among-sharesdisks/ Sent from my iPhone using Tapatalk

Hi all, I just spun up a new Unraid server to run, Lidarr, Sonarr and Radarr. As well as deluge, and QBittorrent. It has been working fine for a week or so and now all of a sudden it locks up and all of dockers won’t work. You can reference the pick of what it dose after 10 or so hours. After I reboot the whole machine it will go back to working and I can have 10 hours or so use. All the time the RAM percentage will slowly clime. I currently have 5 2GB PC3-10600 1333mhz ECC registered ram in this Lenovo s30. I just order 2 16GB PC3-12800 1600mhz RAM to replace the current ram. Just to see if this fixes my issues. I have NEVER ran into and RAM issue with UNRAID before. I mean, I guess it is possible to exhaust your resources but I never thought this way? Any help is appreciated! Thank you !!! Side note: I took another screen shot of the dockers in advanced mode and QBittorrent seems to be the ram hog here. Not sure why.

@DarphBobo, I would have instinctively look for a specific category for the issue I was having but since my first post about ,I don’t know , 2 years ago. I got my hand slapped by a administrator who was rood as hell and moved my question the the “general” support. He then proceeds to message me and say “I was clogging up the forum” WTF!?! One post ?!?....whatever dude.....So from now I have just posted in the “general group”. Listen, I might come off as being angry or mean but I promise you I am not. I absolutely LOVE UNRAID! So much in fact that I run 3 servers. I am constantly finding new purposes for its capabilities! I try not to bother people with non-sense questions about things I can figure out myself and for sure don’t want to waste anyone’s time. I looked at Unraid and it’s community as a breath of fresh air for sure! A place where people can share ideas and grow from each other. Know what I mean ? Sent from my iPhone using Tapatalk

Regardless, the issue was not an issue after all. It has been a couple of years since I have spun up Radarr new off of the shelf and apparently it’s process is to scan library, grab releases, then check for completed downloads. This was a simple answer I needed but no one knew this and I cost me hours and days of re-checking my configurations and wracking my brains to figure out why Sonarr and Lidarr was working but not Radarr. I was almost to the point of spinning up a windows 10 VM and running all of it in there until I could figure out what was wrong. I have ALOT of content and it took 2 days for Radarr to complete everything (dual cpu setup, 1.7TB ram). So in short, I hope this helps SOMEONE who is either a noob or that has had these tools for while but hasn’t been reacquainted with the “initial” process. Just to reiterate, if you have a existing library that is massive and you install Radarr new out of the box it will not shows activity until it makes it to the very last step of moving the complete downloads to the destination.

I thought this was suppose to be a “helpful” community but i appears that I have only gotten 2 replies 4 replies totals from all of my posts on different topics. I know people have seen my issues due to the fact that when I originally post in this community people responded almost instantly. However, like I said, it’s cool I figured it out.......some “community” support this is...... Sent from my iPhone using Tapatalk

Hey it’s cool not to reply. I figured it out anyway [emoji1305] Sent from my iPhone using Tapatalk

Hi everyone. The issue I am having is Radarr is not moving completed downloads from QBittorent. Lidarr is working and Sonarr was working. I am using Lidarr through Deluge and Radarr and Sonarr through QBittorrent. I have labels setup and all configurations match each other everything is setup correctly ( as far as I can tell ). The only variable is this ,I don’t know if this affects anything, I have OpenVPN as a plugin running NordVPN client as well as Deluge and QBittorrent tuning NordVPN (all separate servers). Also, Radarr dosnt show anything in activity and hasn’t for 2 days now. I keep getting notifications that it has grabbed content but never any that they are downloaded. When I go into QBittorrent it shows that movies are complete.What do you guys think is wrong?

Can anyone explain why there is not a OpenVPN container that has kill switch integrated? This is crazy! Privoxy is not good for some people. Also, I don’t know if I trust it completely either. I have used the VPN apps provided by the VPN subscribers or years with no leaks or issues. I have even used open vpn in DDWRT (not for anything important). Call me crazy I guess. I suppose I am looking for reassurance that the code an individual wrote doesn’t have bugs resulting in a leak of my data. Believe me, this is not being mean or anything. I am thankful for sure. Just not aware of how the gears are turning behind the front door lol. Sent from my iPhone using Tapatalk

Ok. So here’s the deal. You might be asking “why don’t you just setup your VPN through your router using ddwrt or something like that...”. Well...... I would but..... let me explain. I have 3 isp inlets. All go to a peplink LBM which utilizes speed fusion. From there I have 2 ciena fiber switches.6 10gig and 15 1gig. My whole network is fiber. The two unraid servers are linked via 10gig fiber to the switches for better throughput. These two servers are my Plex servers.The rest of my home and outdoor ap’s connect via the two switches. The 3rd unraid server is going to be a host for various services. If I use the router option with DDWRT it dosnt play nice with forwarding regular traffic around the vpn. I tried this many times with different upgrades with no luck. If everything goes through the vpn it’s fine. As soon as you try specify certain IP’s that are the only ones need for the vpn it locks up. The other reason the router idea is bad is because I use a static IP on each of the Plex servers to gain remote access due to my CGNAT setup. So for the simplest of reasons it would just easier to use a app/plugin inside unraid to achieve what I need.

I messaged binhex but no reply. Sent from my iPhone using Tapatalk

Hi, does anyone know of any VPN client applications or plugins that support kill switch functions? What I need is to run my NordVPN at the front end so that every docker app will only communicate through this connection. I am able to do this with the Openvpn client app but it does not have a kill switch so that if/when the VPN drops the connections to the internet at all blocked until the VPN reconnects. Thank you in advance! Sent from my iPhone using Tapatalk

Does anyone know a good 24-48 bay 3.5” HDD case that’s nots too expensive. Maybe from surplus or refurbished ? Sent from my iPhone using Tapatalk