AVP

Thank you. Will give that a try.

Have UnRaid 6.2.14 running with 1 Parity and 5 Disk Array. The build is around 5 years old, never had any issues. Just now tried copying a 100GB file over network to UnRaid and noticed it got stuck at 10%. Checked the logs and saw Warnings and Errors, could someone please help me make sense of these and what steps I should take to resolve (Diagnostics are attached below). Greatly appreciate your help! Feb 21 23:11:44 Tower kernel: ata3.00: exception Emask 0x0 SAct 0x40c0000f SErr 0x0 action 0x6 frozen Feb 21 23:11:44 Tower kernel: ata3.00: failed command: READ FPDMA QUEUED Feb 21 23:11:44 Tower kernel: ata3.00: cmd 60/10:00:20:9e:48/01:00:bc:00:00/40 tag 0 ncq dma 139264 in Feb 21 23:11:44 Tower kernel: res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Feb 21 23:11:44 Tower kernel: ata3.00: status: { DRDY } Feb 21 23:11:44 Tower kernel: ata3.00: failed command: READ FPDMA QUEUED Feb 21 23:11:44 Tower kernel: ata3.00: cmd 60/40:08:30:9f:48/05:00:bc:00:00/40 tag 1 ncq dma 688128 in Feb 21 23:11:44 Tower kernel: res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Feb 21 23:11:44 Tower kernel: ata3.00: status: { DRDY } Feb 21 23:11:44 Tower kernel: ata3.00: failed command: READ FPDMA QUEUED Feb 21 23:11:44 Tower kernel: ata3.00: cmd 60/40:10:70:a4:48/05:00:bc:00:00/40 tag 2 ncq dma 688128 in Feb 21 23:11:44 Tower kernel: res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Feb 21 23:11:44 Tower kernel: ata3.00: status: { DRDY } Feb 21 23:11:44 Tower kernel: ata3.00: failed command: READ FPDMA QUEUED Feb 21 23:11:44 Tower kernel: ata3.00: cmd 60/40:18:b0:a9:48/05:00:bc:00:00/40 tag 3 ncq dma 688128 in Feb 21 23:11:44 Tower kernel: res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Feb 21 23:11:44 Tower kernel: ata3.00: status: { DRDY } Feb 21 23:11:44 Tower kernel: ata3.00: failed command: READ FPDMA QUEUED Feb 21 23:11:44 Tower kernel: ata3.00: cmd 60/40:b0:70:92:48/05:00:bc:00:00/40 tag 22 ncq dma 688128 in Feb 21 23:11:44 Tower kernel: res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Feb 21 23:11:44 Tower kernel: ata3.00: status: { DRDY } Feb 21 23:11:44 Tower kernel: ata3.00: failed command: READ FPDMA QUEUED Feb 21 23:11:44 Tower kernel: ata3.00: cmd 60/40:b8:b0:97:48/05:00:bc:00:00/40 tag 23 ncq dma 688128 in Feb 21 23:11:44 Tower kernel: res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Feb 21 23:11:44 Tower kernel: ata3.00: status: { DRDY } Feb 21 23:11:44 Tower kernel: ata3.00: failed command: READ FPDMA QUEUED Feb 21 23:11:44 Tower kernel: ata3.00: cmd 60/30:f0:f0:9c:48/01:00:bc:00:00/40 tag 30 ncq dma 155648 in Feb 21 23:11:44 Tower kernel: res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Feb 21 23:11:44 Tower kernel: ata3.00: status: { DRDY } Feb 21 23:11:44 Tower kernel: ata3: hard resetting link Feb 21 23:11:47 Tower kernel: ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Feb 21 23:11:52 Tower kernel: ata3.00: qc timeout after 5000 msecs (cmd 0xec) Feb 21 23:11:52 Tower kernel: ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4) Feb 21 23:11:52 Tower kernel: ata3.00: revalidation failed (errno=-5) Feb 21 23:11:52 Tower kernel: ata3: hard resetting link Feb 21 23:11:52 Tower kernel: ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Feb 21 23:11:52 Tower kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20220331/psargs-332) Feb 21 23:11:52 Tower kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20220331/psparse-529) Feb 21 23:11:52 Tower kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20220331/psargs-332) Feb 21 23:11:52 Tower kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20220331/psparse-529) Feb 21 23:11:52 Tower kernel: ata3.00: configured for UDMA/133 Feb 21 23:11:52 Tower kernel: ata3: EH complete tower-diagnostics-20250221-2329.zip

Need some help controlling fan speeds on a DELL motherboard. I know that this board can have software controlled fans, under Windows I can run SpeedFan successfully. I tried Dynamix Fan Control plugin, but it does not find / detect PWM controller - I'm not sure if there's a way to manually add drivers. I also tried to follow this guide to manually create a script but running pwmconfig command returns: There are no pwm-capable sensor modules installed. sensors-detect command returns the following # Chip drivers modprobe coretemp modprobe jc42 What else can I try? Any way to load up drivers for Dynamix Fan Control?

Running UnRaid 6.6.7 on DELL T3500 and having an issue setting up Fan Auto Control plugin. When I go into settings for the plugin and hit 'DETECT' for 'PWM Fan' nothing happens, also the 'PWM Controller' drop down says 'none'. I know this motherboard does have a PWM controller, in Windows I'm able to run SpeedFan and have software controlled fans. What else can I try to get the plugin to work? Thanks.

Thanks for creating this plug-in. Its working on my X58 / 6 core Xeon build. I'm able to select 1 of 6 cores as my Processor Temperature field - is there any way to display highest temp per processor instead of individual cores?

I'm considering the following UnRaid setup and need a recommendation on how to achieve this as well as some opinions / comments from experienced users. Parity: 6TB Drive Array: 3 x 2TB Drives for data (Shares will point to these 3 drives) + 6TB USB Drive to mirror data (Not selected in any Shares) This may be an uncommon setup, and some folks may say it's redundant but hear me out. My data will fit on 3x 2TB drives, I can setup Shares to use only these 3 drives and I'm OK having UnRaid balance the files and store data whichever way it prefers. However I do want another copy of all of my data on a single 6TB USB drive, this way I can always have access to my data on a single drive, outside of UnRaid, just in case. I also want this USB drive to be protected by parity. What would be a good way to achieve this?