piotrasd

Hi Guys quick question OpenVPN-AIO-Client-Torless installed, config file applied - got connection Now I would like redirect traffic from one device in my LAN network - example AppleTV through this docker - VPN tunnel Could you quickly tell me how this setup - I tried setup as HOST IP container that he got separate IP like 192.168.0.50 different than unRAID Then on Apple TV I tried used gateway as IP container 192.168.0.50 but didn't work. Any other idea how to make this working ?

nothing /dev/dvb/adapter0/ under this directory and others which is weird and im using tbs-os yes i rebooted few times

for TBS 6909 doesn't work 04:00.0 Multimedia controller: TBS Technologies DVB Tuner PCIe Card Subsystem: Device 6909:0001 Flags: bus master, fast devsel, latency 0, IRQ 55, IOMMU group 16 Memory at f7300000 (32-bit, non-prefetchable) [size=256K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [90] Express Endpoint, MSI 00 Capabilities: [100] Device Serial Number 00-00-00-00-00-00-00-00 Kernel driver in use: TBSECP3 driver Kernel modules: tbsecp3 [ 92.690435] TBSECP3 driver 0000:04:00.0: TurboSight TBS 6909 DVB-S/S2 [ 92.690874] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 92.813154] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:a8 [ 92.848084] i2c i2c-1: Hydra chip version 2 [ 92.854077] i2c i2c-1: loading firmware, please wait... [ 95.185171] ipmi device interface [ 119.039131] i2c i2c-1: Hydra FW alive [ 119.093586] i2c i2c-1: chipID=00000001 [ 119.095225] i2c i2c-1: chipVer=00000002 [ 119.096875] i2c i2c-1: FWVer=0202010a [ 119.126587] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 0 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.126731] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 119.249904] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:a9 [ 119.249914] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 1 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.250034] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 119.357599] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:aa [ 119.357607] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 2 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.357725] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 119.480823] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:ab [ 119.480831] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 3 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.480949] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 119.603888] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:ac [ 119.603895] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 4 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.603957] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 119.727119] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:ad [ 119.727139] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 5 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.727311] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 119.850890] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:ae [ 119.850907] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 6 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.851072] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 119.967030] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:af [ 119.967047] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 7 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.967240] TBSECP3 driver 0000:04:00.0: TurboSight TBS 6909 DVB-S/S2 : PCI 0000:04:00.0, IRQ 55, MMIO 0xf7300000 but when I looking into /dev/dvb I see only adapter0/ adapter1/ adapter2/ adapter3/ adapter4/ adapter5/ adapter6/ adapter7/ but nothing more like before tuner, dvr, ca, etc

so maybe did mount bzmodules and bzfirmware as I have empty folders inside on running system

your

im afraid still some bug still my tuner are not visible and now even folder /lib/modules/5.7.8-Unraid/kernel/drivers/media/ and /lib/firmware are more empty than before

im always was using this package and always works on CHMB plugin im building as well, now more looking into logs, im pretty sure there was some compilation issue or after compile didn't installed, I go through all modules installed and was look like stock only

yes correct

yes I check all modules and there are not from TBS at all, like be not installed in image ls /dev/dvb /bin/ls: cannot access '/dev/dvb': No such file or directory

didnt work i check, Tbs 6909 just tbsos - but i did build and for some reason didnt work, so maybe i did something wrong ;/

anyone have maybe builded beta25 with DVB tbsos ? and can share, thx

Hi please add to you container package iputils-ping as some plugins for home bridge required ping package like homebridge-samsung-tizen Thanks

Hi, please test virto-gpu HW acceleration from this topic. https://lime-technology.com/forum/index.php?topic=56368.0 if will postive feedback LE team will merge that changes. THX

safari and Firefox i checked on both, and OK after delate config and reinstall FAN settings back. CPU cooler i for sure 4 pin, chipset cooler 3 pin - but this strange work, or even for me dont work. But when i put ipmi-raw command (which i found in this topic) into console i slow down chipset coooler without problem. And still no any sensors read this im also checked in Chrome

Thanks ! i know that show ipmi-sensors ID | Name | Type | Reading | Units | Event 3 | ATX+5VSB | Voltage | 5.10 | V | 'OK' 4 | +3VSB | Voltage | 3.52 | V | 'OK' 5 | Vcore | Voltage | 1.79 | V | 'OK' 6 | VCCM | Voltage | 1.36 | V | 'OK' 7 | +1.05 | Voltage | 1.07 | V | 'OK' 8 | VCCIO_OUT | Voltage | 1.01 | V | 'OK' 9 | BAT | Voltage | 3.02 | V | 'OK' 10 | +3.30V | Voltage | 3.34 | V | 'OK' 11 | +5.00V | Voltage | 4.92 | V | 'OK' 12 | +12.00V | Voltage | 12.20 | V | 'OK' 13 | CPU_FAN1 | Fan | 1100.00 | RPM | 'OK' 14 | REAR_FAN1 | Fan | 1900.00 | RPM | 'OK' 15 | FRNT_FAN1 | Fan | N/A | RPM | N/A 16 | FRNT_FAN2 | Fan | N/A | RPM | N/A 17 | FRNT_FAN3 | Fan | N/A | RPM | N/A 18 | M/B Temperature | Temperature | 46.00 | C | 'OK' 19 | TR1 Temperature | Temperature | 0.00 | C | 'OK' 21 | CPU Temperature | Temperature | 38.00 | C | 'OK' i have two more FAN on front for cooling HDD but i must buy cable extesion (not connected) Thats menu from your screen i have before but after restart dissapear, even for moment show me my mainboard is not supported but now i have something like this I will try delate all configs and reinstall plugin