piotrasd

Hi Guys quick question OpenVPN-AIO-Client-Torless installed, config file applied - got connection Now I would like redirect traffic from one device in my LAN network - example AppleTV through this docker - VPN tunnel Could you quickly tell me how this setup - I tried setup as HOST IP container that he got separate IP like 192.168.0.50 different than unRAID Then on Apple TV I tried used gateway as IP container 192.168.0.50 but didn't work. Any other idea how to make this working ?

nothing /dev/dvb/adapter0/ under this directory and others which is weird and im using tbs-os yes i rebooted few times

for TBS 6909 doesn't work 04:00.0 Multimedia controller: TBS Technologies DVB Tuner PCIe Card Subsystem: Device 6909:0001 Flags: bus master, fast devsel, latency 0, IRQ 55, IOMMU group 16 Memory at f7300000 (32-bit, non-prefetchable) [size=256K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [90] Express Endpoint, MSI 00 Capabilities: [100] Device Serial Number 00-00-00-00-00-00-00-00 Kernel driver in use: TBSECP3 driver Kernel modules: tbsecp3 [ 92.690435] TBSECP3 driver 0000:04:00.0: TurboSight TBS 6909 DVB-S/S2 [ 92.690874] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 92.813154] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:a8 [ 92.848084] i2c i2c-1: Hydra chip version 2 [ 92.854077] i2c i2c-1: loading firmware, please wait... [ 95.185171] ipmi device interface [ 119.039131] i2c i2c-1: Hydra FW alive [ 119.093586] i2c i2c-1: chipID=00000001 [ 119.095225] i2c i2c-1: chipVer=00000002 [ 119.096875] i2c i2c-1: FWVer=0202010a [ 119.126587] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 0 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.126731] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 119.249904] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:a9 [ 119.249914] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 1 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.250034] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 119.357599] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:aa [ 119.357607] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 2 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.357725] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 119.480823] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:ab [ 119.480831] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 3 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.480949] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 119.603888] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:ac [ 119.603895] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 4 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.603957] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 119.727119] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:ad [ 119.727139] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 5 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.727311] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 119.850890] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:ae [ 119.850907] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 6 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.851072] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter) [ 119.967030] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:91:8a:af [ 119.967047] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 7 frontend 0 (TurboSight TBS 6909 DVB-S/S2 )... [ 119.967240] TBSECP3 driver 0000:04:00.0: TurboSight TBS 6909 DVB-S/S2 : PCI 0000:04:00.0, IRQ 55, MMIO 0xf7300000 but when I looking into /dev/dvb I see only adapter0/ adapter1/ adapter2/ adapter3/ adapter4/ adapter5/ adapter6/ adapter7/ but nothing more like before tuner, dvr, ca, etc

so maybe did mount bzmodules and bzfirmware as I have empty folders inside on running system

your

im afraid still some bug still my tuner are not visible and now even folder /lib/modules/5.7.8-Unraid/kernel/drivers/media/ and /lib/firmware are more empty than before

im always was using this package and always works on CHMB plugin im building as well, now more looking into logs, im pretty sure there was some compilation issue or after compile didn't installed, I go through all modules installed and was look like stock only

yes correct

yes I check all modules and there are not from TBS at all, like be not installed in image ls /dev/dvb /bin/ls: cannot access '/dev/dvb': No such file or directory

didnt work i check, Tbs 6909 just tbsos - but i did build and for some reason didnt work, so maybe i did something wrong ;/

anyone have maybe builded beta25 with DVB tbsos ? and can share, thx

Hi please add to you container package iputils-ping as some plugins for home bridge required ping package like homebridge-samsung-tizen Thanks

Hi, please test virto-gpu HW acceleration from this topic. https://lime-technology.com/forum/index.php?topic=56368.0 if will postive feedback LE team will merge that changes. THX

safari and Firefox i checked on both, and OK after delate config and reinstall FAN settings back. CPU cooler i for sure 4 pin, chipset cooler 3 pin - but this strange work, or even for me dont work. But when i put ipmi-raw command (which i found in this topic) into console i slow down chipset coooler without problem. And still no any sensors read this im also checked in Chrome

Thanks ! i know that show ipmi-sensors ID | Name | Type | Reading | Units | Event 3 | ATX+5VSB | Voltage | 5.10 | V | 'OK' 4 | +3VSB | Voltage | 3.52 | V | 'OK' 5 | Vcore | Voltage | 1.79 | V | 'OK' 6 | VCCM | Voltage | 1.36 | V | 'OK' 7 | +1.05 | Voltage | 1.07 | V | 'OK' 8 | VCCIO_OUT | Voltage | 1.01 | V | 'OK' 9 | BAT | Voltage | 3.02 | V | 'OK' 10 | +3.30V | Voltage | 3.34 | V | 'OK' 11 | +5.00V | Voltage | 4.92 | V | 'OK' 12 | +12.00V | Voltage | 12.20 | V | 'OK' 13 | CPU_FAN1 | Fan | 1100.00 | RPM | 'OK' 14 | REAR_FAN1 | Fan | 1900.00 | RPM | 'OK' 15 | FRNT_FAN1 | Fan | N/A | RPM | N/A 16 | FRNT_FAN2 | Fan | N/A | RPM | N/A 17 | FRNT_FAN3 | Fan | N/A | RPM | N/A 18 | M/B Temperature | Temperature | 46.00 | C | 'OK' 19 | TR1 Temperature | Temperature | 0.00 | C | 'OK' 21 | CPU Temperature | Temperature | 38.00 | C | 'OK' i have two more FAN on front for cooling HDD but i must buy cable extesion (not connected) Thats menu from your screen i have before but after restart dissapear, even for moment show me my mainboard is not supported but now i have something like this I will try delate all configs and reinstall plugin

Hi guys ! Im with new mainboard start using IPMI plugin, Great stuff ! My mainboard: ASRock - E3C224D4M-16RE Im updated bios, BMC and LSI firmware to latest. but i have some problem with plugin is possible setup control of FAN normal and over IP, but i dont see any reaction after setup settings also in Readings i dont see anything Any idea ? what i could do wrong ? Sensors are visible including speed of FAN each one, temp. etc. Maybe someone can share with config for Asrock im suppose most for family ASROCK RACK are smillar ?

Hi @dlandon nice will be add possibility mount KVM images like now you have ISO is very easy way to mount qow2 or raw image in unRAID https://www.kumari.net/index.php/system-adminstration/49-mounting-a-qemu-image qemu-nbd --connect=/dev/nbd0 file.qcow2 Then you mount it: mount /dev/nbd0p1 /mnt/kvm you can check parition by fdisk -l /dev/nbd0 Then we can browse files without starting VM, fix somethig, get fast access etc. (in beta21 is problem with module nbd because max_part=0 and when we try mount any parition of img KVM then we get error, for now fix fe can start kernel with parametr nbd.max_part=64, from beta22 i know that will be fixed and default setup on 64 )

UPDATE: after upgrade to latest version now starting OK ! there is any hope add any logs to unraid-hole there is no possibility enter to container and on unraid webgui dont show any logs

root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="unRaid-Hole" --net="bridge" -e TZ="Europe/London" -p 53:53/tcp -p 53:53/udp --cap-add=NET_ADMIN spants/unraid-hole 3b83ade50d4ebadac05a93c8a87d82d4c64d9854d55ac9d2301cd561700b7a0d Error response from daemon: Cannot start container 3b83ade50d4ebadac05a93c8a87d82d4c64d9854d55ac9d2301cd561700b7a0d: Error starting userland proxy: listen tcp 0.0.0.0:53: bind: address already in use The command failed.

i will make today OE 6.0 for unRAID template without 9p mountpoint and with default settings - all drivers etc. UPDATE Latest Openelec 6.0 FINAL - all with default config like in LimeTech Template https://www.sendspace.com/file/srdslj

Replace image put to this same location and change name

Hi how from telnet/ssh update docker container (one by name) ? i want make cron task ?? any idea ?? Im already made autobuild triger on Dockerhub but i dont want every day clik on web button update or maybe is possible add on webpage option for auto check and update if possible ?

hi @gfjardim any hope to update CUPS to latest 2.1.2 version with support El Capitan macOS ?

Hi This is my latest Openelec image compiled for unraid, i made few changes https://www.sendspace.com/file/83q6rd - based on Openelec 6.0 final with kodi 15.2 final - updated libairplay to latest from master - added 9p mount shares from unraid - system fully load to RAM - i dropped few drivers (for sure working NVIDIA and Intel) for mount /mnt/shares from unraid please add to XML this lines <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt/user'/> <target dir='unraid'/> </filesystem> best just add below this lines <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt/cache/.apps/OpenELEC'/> <target dir='appconfig'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/> </filesystem> code for mount 9p i taken from @eschultz (thanks) i dont know why he dropped this in new build ... for me eveything working fine so im using now only 9p without NFS mounting PS. Later i will maybe build with full driver set, and Beta 7.0 with Jarvis UPDATE: build with all GPU drivers - https://www.sendspace.com/file/szkwm4

thanks for great plugin, but mostly for KVM virtu idle/sleep dont work proper, like for Openelec ;( i was talked about this with @jonpanozzo and @@eschultz - this is last thing what about dreaming: "wakup virtu like Openelec from Remote and autosleep after some idle time" Let me know if you tested with Openelec - if this will work maybe will be possibility write script with looking on USB activity (some remote)\ and when find it, then call to script wake on lan to resume virtu ... Or maybe somebody will have better idea how this resolve ....