ukkeman
Members
-
Joined
-
Last visited
-
ahh another point i missed. i switched gpu order in the board some month ago so that i can see cli and have a passthrough. Thats why i do not need that anymore. Cause i was sure i tried without rom and ovmf. Thanks for clearifying again.
-
Yes. That's it. Last night I read again how to do this. And my setup and settings never changed since my GTX 960 or so. This said: - do not use a rom - do use ovmf * If you have a more recent GPU That's it.
-
Does nobody have an idea why the boot process is not shown? Nor the post of the bios?
-
Hey there im having, since kinda ever, the issue that all my VMs (windows 11, linux etc) are all booting with a blackscreen until the login screen of windows/ubuntu/ fedora is shown. I'm unable to see the virtual bios posting or an update of a kernel or windows update. Everything else is working just fine like audio opengl etc. Attached is my vm.xml for a linux variant vm.xml
-
Currently my array is kind of always on and spins up even if manually spun down. When i spin them down it only takes several seconds until they spin up again. I can not find any reason why they wake up, File Activity plugin does not show anything, grep around with lsof on the terminal does not show anything. I tested with : - VM Manager disabled - docker container disabled. - smb disabled (no other share system has been enabled) - Most of the plugins have been removed. - no share has array as a second storage The log shows read smart data and i had that in mind for a second, but as i learned from other threads here, it reads smart values when spinning up and is not the cause to spin up. It stays down until i visit the main tab again. For the sake of completenes: i changed two things: 1. upgraded to 6.12 2. added another drive to the array formated as zfs to a pool where the rest is formatted as xfs.
-
Hey there when i shutdown unraid it does not do a clean shutdown, but waits forever. Last command issued is: "Starting diagnostics collection..." and stays there forever (at least i waited 10 minutes until i hard reset the machine). When i run the diagnostics through cli the file is created fairly fast after some seconds.
-
tried this: but it this does not seem to work anymore. like there is no pid anymore in run. Will see if i can modify it and get it to work
-
I tried adding some sysctl commands to br0 device like addr_gen_mode=2 and some stable_secret. The secret is added and kept, but not the gen mode it is set to 1 no matter what i do. So there seems to be some `ip link set` or some other default when br0 is added.
-
Hey, i'd like to configure the suffix of the ipv6 address of br0 (br0 only maps with eth0 and docker/vms of course here). I see that addr_gen_mode is set t0 zero. The goal is to have a static suffix ipv6 for the br0 device. What is the best and persistent way to do this on unraid? It wont be a problem to edit files on the boot/config dir or add custom bash shell scripts. Any hints greatly appreciated.
-
I am unable to specifically reproduce it but when playing with a second interface, setting it to ipv6 and ipv4 only and back and to ip4 + ipv6 and just play with a second interface it sometimes resets eth0 and eth1. The network.ini file in /var/local/emhttp then is broken and includes only the last 4 lines. I tried to eliminate a race condition (2 requests trying save at the same time), but sometimes managed to reproduced it even if when waiting several minutes between requests.
-
Since upgrading to 6.11.0 im unable to view or download the peer configuration is unusable. After click there are two calls against the unraid server - a websocket call against sub/changes which never results into anything and is always pending - an http call against: webGui/include/StartCommand.php POST with data: `wg_config peer-tron-wg1-4 /peers nchan` which results in a single int the lghtbox below opens and nothing happens anymore. Logs are clean, `systail -f /var/log*` is also clean. My server does not run on the default 443 port but on 1443 and my hoster just thrown me under te bus with a surprise ipv6 DS lite account. I tried this qr code generation on chromium and firefox (on linux) through ipv4 and ipv6 and hostname to eliminate that one of those things is an issue.
-
when i try to start the service, sometimes it somehow does starts, BUT only if there is no added peer. If i add a peer there is always this error: [#] ip -4 route flush table 202 [#] ip -4 route add default via table 202 Error: inet address is expected rather than "table". [#] ip link delete dev wg2
-
Tested it with GBIT Lan now: SMB: 45 MB/s SCP: 110 MB/s to the same share. Used in both cases the mnt/User path and not any direct disk share path.
-
I tried to create a new share with cache only. Restarted the array. Got the same speed around 30MB/s
-
No I did not the settings are there since a very long time and since I restarted the machine and the array several times. So I don't think this is an issue. I also can see that smb transfer writes to the cache disks when I look at the dashboard and directly on the mounted disks. I also can not see any significant things like maxed out CPU or oom in tools like netdata. This drives me a bit crazy. There is no encryption of the disks but if that'd be the bottle neck I would also see a higher CPU load