MrMooreIOM
-
Posts
51 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by MrMooreIOM
-
-
Hey Guys,
Just noticed this error and wondered where to start troubleshooting. I've followed Squids guide Here and can confirm the cache disks are not full. It seems the cache has gone into a read only mode from looking at the logs.. any suggestions on how to change this without losing data.
I've downloaded and attached Diagnostics
Any help/guidance would be massively appreciated
Thanks in advance.
-
Anyone got any idea on this? any support would be appreciated..
-
Hello Everyone,
Firstly I'd like to say happy new year to everyone.
I'm having an issue when connected where I cannot access anything from the internet. I can access my dockers and RDP to VM's etc no problem but the minute I open a chrome tab and search I receive a DNS error.
I currently have my config setup to "Remote tunneled access" which from the screenshots should give me internet access. I don't believe the config to be the problem and im fairly certain this is a DNS issue. can anyone advice the DNS setup needed to give me access. currently my "Peer DNS Server" is set to the default "(Optional)"
If anyone could advise It'd be hugely appreciated..
Kind Regards,
-
1 hour ago, pballs said:
its under Tools -> Diagnostics -> Download
Attached, apologies about this.
-
10 hours ago, Squid said:
You really should post the entire diagnostics.zip file so that the experts ( @JorgeB) can have a gander at them.
Hey Squid,
thanks for your reply. I did try but couldn’t remember where to pull the full log from.
could you advise?
Thanks
-
Hello All,
I hope everyone is well during these times. today I noticed my Dockers & VM's were stopped so decided to reboot the system. Once the system came back online I noticed all dockers & VM's had disappeared. I've now done some further digging and noticed one of my cache drives ( I have x2 240GB SanDisk SSD's as a cache pool ) is unmountable.
What is my next steps to restore my data? Ideally I don't want to be formatting my drive. so any advice or pointers in the right direction would be highly appreciated..
I've also attached my logs
Kind Regards,
-
Hello All,
So I recently made the move over from OpenVPN to WireGuard. I've got it setup so when im off LAN I can securely tunnel into my UnRAID server. I can access the likes of SabNZB, Radarr and Sonarr however when I access my UnRAID server once VPN'd in I get "cannot open the page because the server cannot be found" when using safari on my mobile. I also get a error when trying to access Plex server I get "Plex is Not reachable"
I'm struggling to understand what this could be. I have PiHole running on a Pi on my LAN. I've updated the "Peer DNS Server" in Wireguard settings but still having no luck..
-
On 2/16/2020 at 10:57 AM, testdasi said:
If you installed Ubuntu correctly then no, removing the ISO will not stop it from booting.
In fact, you are supposed to remove the installation iso after installation.
Ahhh okay, Thanks for this info.
-
13 hours ago, Squid said:
You can always edit the VM template and remove the Installation ISO from it.
Wouldn't this then make the VM unable to boot on next startup? I have a ubuntu VM and whenever its rebooted It reinstalls everything again causing it to use default logins etc.
-
Hey All,
Hope everyones well.
I recently started using VM's on my UNRAID Build. They work flawlessly however I find when I reboot the VM's they display the attached error, and also seem to go through the OS installation again. Could anyone advise where im going wrong :)
Thanks in advance.
-
22 hours ago, trurl said:
Possibly you have some shares misconfigured. Post diagnostics.
find diagnostics attached.
-
Hey All,
recently noticed my cache disks are filling up and the mover doesn’t seem to clear anything up. So I’m thinking something’s been partially downloaded and got stuck on the cache disk. Do you know of any good apps to check what the largest dirs on the cache disks are. Or am I best going into terminal and checking that way
-
Does anyone know the default username/password?
-
Hey All, Recently installed MineOS as a docker on my Unraid server, however i dont know default username/password. I did specify the password so assuming i know that. can anyone advise the username?
Thanks
-
18 minutes ago, Frank1940 said:
You could use the New Configuration Tool Tools >>> New Config.
I personally have never used this tool but I would recommend turning on the 'Help' (Question Mark (?) Icon on Toolbar)
If I read your situation correctly you are starting over with new disks that contain no data that you want to preserve. If this is not the case, post back and describe your situation in detail if you have any questions about how to proceed!
Brilliant, thanks!
-
Hey All,
Hope everyones well. I've recently rebuilt my unraid server as the previous Gen8 HP Microservers motherboard died. I've got new disks and now when trying to start the array I get the following error. "ERROR:TOO_MANY_MISSING_DISKS" is there something I can do to make unraid forget about my previous build. I would just get a new USB however my key is on this one and I've already transferred it so cant do anything without emailing support.
Hope there is something in the config I can remove to make it forget my previous disks etc..
-
I've recently done a complete rebuild of my unraid server, I moved from a HP Gen8 Microserver to a custom AMD Build. (See Build list below)
https://uk.pcpartpicker.com/list/v9FrvW
I'm housing this in the Fractal Design Define R6 which can house up to 10 drives, I've powered my first drive up with the SATA Power from the PSU to the drive however the cable only can supply power to 3 drives. (Image of cable i'm talking about below.)
Is it possible to get one that will supply power to 5+ Drives? Ideally I dont want multiple cables running if i can get one decent one and run that instead.
and advice/tips would be apprecaited.
-
I do have the Plex Pass, I’ll have up to 5 streams at any one point. And as for endpoints these will be either mobile devices such as iPads etc or smart TV’s with the Plex app installed.
-
I see, I was under the impression the transcoding was done by the GPU. In that case that’ll save me a fortune lol
-
4 hours ago, rorton said:
nah, they don't use hardly any resource - i got a roku hooked up to try, and set emby up on it - and it started to transcode due to the audio, but the cpu hardly broke a sweat - the rest off my media client devices are raspberry pi's so dont need to transcode.
Should be fine - there are also sooo many fan positions in this case, that if you did find problems, then you can chuck some more fans in it
Ahhh Excellent, I’ll hold off until Black Friday and see if any of my parts go on offer. 🤞🏼 John_M mentioned above to run a 1050ti you’ll need a special version of UnRAID. Did you need to install this?
-
2 hours ago, rorton said: Cheers
I run as a NAS, my Mac backs up to it using Time Machine, and then i have 2 VMs, one Linux with LibreNMS running (a network monitor), and then another Windows 10 VM in case i need to do anything windows based (certain mp3 tagging apps dont run on Mac)
Im planning on more VMs hence the extra Ram! One for Pi Hole (currently have this running on a Ras Pi, wanted to consolidate)
Docker wise i run
SabNZBd
Radaar
Sonaar
Emby Media Server (the plex alternative!)
Unifi for Wireless and Router controller
TFTP Server for flashing network kit
Krusaider for file management
that's it for now, but my old server was so slow, it was lagging, so will get to play with more stuff now too i think
What put you off doing it in a Matx case then - you mention the amount of dockers you run
Ahhh, Ace! Tbh I thought with the amount of dockers the thermals wouldnt be great. but seeing you manage makes me no longer worry lol.. I heard that plex transcoding was pretty resource intense and thought of getting a bigger case with more fans and possibly a AIO CPU cooler.
-
32 minutes ago, rorton said:
yeah it took me ages to decide on the case for the same reasons
Thermals wise it fine, there is so much space in the mb area once built that the CPU and board are fine, and i moved the fans around a bit, so i put 2 in the hard disk area, one to bring cold in, at the bottom, and then the existing exit at the top - then just left the cpu side with a single exit fan at the rear.
Everything is ticking over really nicely,
Very Nice,
Looks ace! What do you use your unraid server for? I originally wanted a build very similar to yours however I run my unraid server as a NAS with 5/6 Dockers (PiHole, Sonarr, Radarr, Plex, DuckDNS and Lets encrypt.) I know Plex can be abit resource greedy at times. I may rethink my spec if you're doing similar with yours.
Thanks,
-
7 minutes ago, rorton said:
Ive just done a similar thing - gone from a HP MicroServer (N40L) and i went with the following spec.
Ryzen 2700 (non X)
Asrock B450m Pro 4 motherboard (MicroATX)
32gb Crucial DDR4 2666
500gb NVME (Cache)
2gb Nvidia 710 (just really so i could build the thing)
Fractal Design Node 804 Case
Its running great, really pleased with it
I also bought a Dell H310 Perc Raid card from eBay for cheep, flashed it with IT firmware.
I have 4 WD reds from my old system running on the Dell card, an SSD from my old system connected to the onboard SATA
Very Nice, Funnily enough I was looking at the exact same case, as I wanted something that looks remotely similar to the Microserver. I was scared off by thermals though. I'm curious to know how it runs?
Thanks,
-
On 10/19/2019 at 5:34 PM, John_M said:
Yes, the MSI X470 Gaming Plus gives you the option of running the "top" and "middle" slots as two PCIe v3 x8 and it's a similar price to the B450 in your original spec.
I only have two reservations. The first is that a double-width PCI card (such as the video card you chose) will block access to a x1 slot. It's a common problem with motherboards aimed primarily at gamers but since the ATX spec allows for up to seven slots and only six are implemented here, they could have arranged the board differently as, for example, Gigabyte did on their X370 Gaming K5. I think PCIe slots are a precious resource and don't like to waste them. You might think it's worth the sacrifice, though.
The other is that it has a Realtek NIC. As far as I know, Realtek only supplies driver code for Windows and has made no contribution to the Linux source. So Realtek drivers in Linux are reverse-engineered and have had reliability problems in the past. Broadcom and Intel NICs are much better supported by Linux and tend to have a lower CPU load as some of the checksum calculations are done in hardware. That said, Realtek NICs work well enough with recent Unraid releases and you can always add an Intel NIC later - at the cost of a PCIe slot, of course!
The GTX 1050Ti should allow Plex to use hardware transcoding if you use the special version of Unraid compiled by LinuxServer.io. If you haven't read it already, you'll want to look at this thread:
Hello John_M,
Appreciate the feedback, being honest I'd prefer my build to be as minimal hassle as possible. Do you recommend any other boards for under £150. As for the suggestions regarding the GPU. do all GPU's require a "Special version" of Unraid?
As mentioned I'm looking to run the vanilla install of unraid with minimal hassel
I really apprecaite the feedback and support with helping my on my first proper unraid build though... Legend 👌
Mobile Optimized View
in Lounge
Posted
Hello All,
Hope everyones well, does anyone know if there is a theme which is optimized for mobile view? or if thats something in the pipeline? or even better if theres somewhere I can request this if it hasnt been requested already.
Thanks in advance.