Mihael

After installing the latest Unraid version, I couldn't start the Plex container anymore. Initially, I thought it might be due to the settings, so I removed the graphics card ID (GUID) from the settings and saved it. However, the app disappeared suddenly, and even a re-installation didn't work. I can see that there are orphaned container images. Is there a way to recover the containers, or is there another method to reinstall Plex cleanly? Ideally, I'd like to get my "old" Plex back. Thank you for your help. diagnostics-20230911-1520.zip

Is there an option to control the FAN speed of my CPU watercooler? - Corsair H115i RGB Platinum I see the Corsair H115i RGB Platinum in the VM settings, but when I activate it, I can't see it in Windows. I installed also the libvirt hotplug plugin but nothing is happening. The iCue software on my Windows VM doesn't detect the Corsair H115i RGB. Does anyone have a similar setup? If this is not feasible with Unraid. Can anyone recommend a hardware controller where I can control the CPU water cooler fans externally? Thanks!

I missed the "link". It worked out now, thanks!

Hello, I updated my UnRaid to the latest 6.9+ Version. I'm getting the following warning: vfio-pci.ids or xen-pciback.hide found within syslinux.cfg. For best results on Unraid 6.9+, it is recommended to remove those methods of isolating devices for use within a VM and instead utilize the options within Tools - System Devices. See HERE for more details What exactly do I have to deactivate so that I no longer receive this message? In the forums I find various information, but none of them helped me. Thank you!

It's cheap for a 4- port. The question is does it work properly?! Anyway, I don't have space in my case for two more HDDs. All 10 Slots are occupied. Thank you anyway.

https://www.amazon.com/dp/B07Y92RDKH/ref=psdc_284718_t3_B07ST9CPND This one works stable. I'm happy with it.

I have been getting a hardware error message for some time. mcelog via the NerdPack plugin is installed. I have attached the diagnostics file. Thanks for your help! diagnostics-20200817-1400.zip

I have the same setup and the only drivers available are "k10temp nct6775" and blank sensor temperatures for all fields.

My bad, thanks!

Hi, I'm getting a SMART Status error. The disk has guarantee. If I need to send the disk, how I can move data from that disk to another one? Is it better to buy a spare one? Diagnostics attached. Thank you! diagnostics-20200305-1427.zip

Hi guys, I have 8 (two of them for parity) disks and one shows SMART error. I have guarantee and want to send it for a replacement. How can I move or split the data from one disk to other 5 disks with data? What happens if I stop the array and exclude this disk and take it away? Will unraid rebuild the data on the other disks which are left or do I have to add a new disk? Thanks!

Thank you very much! Somehow I missed the 2.0 ... I will try this one -> https://www.amazon.com/dp/B07Y92RDKH/ref=psdc_284718_t3_B07ST9CPND Thanks!

These cards would fit or did I misunderstand something? https://www.amazon.de/Port-SATA-Controller-Express-Schnittstellenkarte/dp/B00BUC3N74

Hi I have a ROG Strix X570-E Motherboard and all 8-Sata Ports are in use. My 3 x PCIe 4.0 x4 Slots are not available. There are two PCIe 4.0 x1 Slots which I can use. Which card would you recommend, I would like to connect additional 2-4 Sata hard drives? Thank you!

I've been pretty busy for the past few days and I was also abroad. I wanted to thank you for the many suggestions and the help. The Unraid server is now running smoothly since Unraid 6.8.1 (NVIDIA BUILD). I am now also satisfied with the RTX 2070 gpu. A lockdown rarely happens, the last lockdown happened with Unraid 6.8.1 (NVIDIA BUILD) At the beginning I had a lot of problems with my UNRAID Server and the main reason was that a RAM module was broken. Although all 4 modules were new, one was broken. I could only find out after a MEM TEST. The Mobo bios was also upgraded to the latest version. The server takes over several tasks at the same time without issues. I can play FarCry 5 with max settings while 4 Plex transcoding are running. It could handle more transcoding, but I haven't tested it. At high load, the inside of the case gets around 36° celsius warm. The hard drives have more or less the same temperature. Below I have listed my setup if anyone is interested: - Plex Docker with GPU Passthrough (Nvidia P2000) - Tautulli Docker - SabNZB Docker - Radarr Docker - Sonarr Docker - Deluge Docker - Make MKV - Handbrake - Ombi - Upstatsboard - Filebot - Windows 10 (1909) VM with GPU Passthrough (Gigabyte GeForce RTX 2070 SUPER Windforce OC) and one USB port is assigned for mice and keyboard - just for Gaming - Windows 19 (1909) VM without GPU Passthrough - Random work - Mac OS Catalina VM - Random Tests Hardware: CPU: AMD Ryzen 7 3700X 8-Core @ 3800 MHz CPU Cooler: Corsair H100i Mobo: ASUS ROG STRIX X570-E (Bios 1405) SSD: 2 x 2TB PNY XLR8 CS3030 for Unraid Cache1 & Cache2 RAM: 4 x 16GB Corsair Dominator Platinum 3200 MHz GPU 1: NVIDIA Quadro P2000 GPU 2: Gigabyte GeForce RTX 2070 SUPER Windforce OC 8G Storage: 9 x 10TB Seagate IronWolf & 1 x 10TB Toshiba X300 PSU: Seasonice Prime Ultra Titanium 1000W Case: Fractal Define R6

Thanks testdasi. It's a bit confusing when I see a Displayport on my mainboard. Asus ROG Strix 570-E with Amd Ryzen 3700x... not sure if I have a GPU support now. Anyway I sold my 5700XT and bought a Nvidia 2070 for a good price, it worked perfectly in the beginning but after a "force shutdown" I can't run it anymore... I posted the problem here -> It's so disappointing when you watch those youtube videos of Linus & co how they build two gaming VMs on Unraid with two GPUs 2-3 years ago, and I can't make it run in 2019

"So it looks like you need those syslinux entries." It's because the USB-C connector on the GPU I guess... "Have you tried swapping your Gus between VMs?" I have just the one Windows Gaming VM, but I can try to swap the GPUs between the Plex Docker and the Windows VM. "is this problem gpu also your unraid boot gpu?" I guess so. I can see how unraid boots on my screen. I have a Displayport connector on my motherboard, but I don't know how to make that one as the Unraid GPU. I have to mention that I have a AMD Ryzen 3700x, as far as I know it doesn't have a GPU onboard, but the Asus mainboard has a Displayport connector. "Have you tried including a rom file?" No, but I will try to do that tomorrow after work. Thanks a lot for your time!

I shut it down completely and removed the power cable for 5 minutes... no help. As soon as I start the VM, log goes to 100% and can't connect the VM via remote desktop and no signal to the screen. If I remove those syslinux entries and reboot the server, I get this message -> I thought that this GPU reset is only necessary with AMD GPUs. Do I need a third GPU for Unraid? I see in the older Unraid tutorials that they add a third GPU. I use my second GPU for the Plex Docker and this works without any problems. The VM works without any troubles if I start the VM with VNC instead of GPU passthrough...

I added the diagnostic file here-> diagnostics-20191208-2017.zip

"If you remove the USB and Serial controllers from your syslinux, will the VM boot?" It didn't worked before, and I found this little tutorial After adding those two "devices" to the syslinux it worked. But after an unfortunate "force shutdown" it doesn't work anymore. I will try to remove and start without that or to check the other PCI devices boxes and let you know. Thanks.

Hello everybody, I am slowly despairing... After I had problems getting the VM running with an AMD GPU (5700), I was able to swap it for a Nvidia (gigabyte geforce rtx 2070 gaming oc). At the beginning, the VM was working properly and I was able to run the VM with GPU passthrough too and I tested a game and everything worked super smooth. Unfortunately I did a force shutdown and I could not start the VM anymore and the log quickly went up to 100%. Extending the log from 128mb to 512mb does not help, as it quickly gets full after another VM startup. Only a server reboot helps to clear the log files. Since the graphics card has an USB-C port, I've added the usb-c & serial bus controller ID to the syslinux config as recommended in a video. As you can see in the picture, these 2 also appear in "Other PCI Devices" 10de:lada 10de:ladb Although I can attach the graphics card and the sound of the VM, but I can not start it anymore. The 4 attached CPU cores and log is running at 100% Does anyone have any idea? In the second PCI-E slot, I have a P2000 passthrough to Plex docker and this works fine since weeks. Thanks!

Hi there I wanted to create a gaming vm and I bought the Sapphire 5700 XT Pulse on a BlackFriday deal. Unfortunately, I found this video only after I had the same problems -> I read in the web that the problem has been fixed but unfortunately I can not find decent instructions how to apply this fix to Unraid. Had someone already dealt with this? I have to mention that I run the Radeon in the first PCIE slot and a Nividia P2000 in the second slot which is used for Plex Docker. Do I need a third GPU for Unraid itself? It's confusing, I read in many places that users have a GPU just for Unraid. My setup: Ryzen 3700x Asus ROG Strix x570-e Nvidia P2000 Sapphire 5700 XT Pulse Thanks!

CPU might be going... damn... it's a brand new AMD Ryzen Thank you for your help.

Fix Common Problems is reporting a Machine Check Events error: Your server has detected hardware errors. You should install mcelog via the NerdPack plugin, post your diagnostics and ask for assistance on the unRaid forums. The output of mcelog (if installed) has been logged. I downloaded the diagnostics. Can someone tell me what to do here? Thank you! diagnostics-20191201-1032.zip

Yes, I did. It's installed. Do I have to change the settings? That's pretty slow, especially if all drives are fast. Would it help if I would connect the HDDs to a PCI-E controller instead of motherboard? All 8 discs are connected to the Asus motherboard now. I noticed that the first 3-5 seconds transfer rate is 500mb/s and then drops to a constant 25-50mb / s. Thank you!