sendas

I fixed it, I must of made an error in setting something up and not reboot the machine. I had an /mnt/user/Appdata and a /mnt/user/appdata

I downloaded my diagnostics. blackberry-diagnostics-20231111-0915.zip

Hi, I had a power outage last night and woke up to my server rebooted. When I start the array the GUI stop responding. but I can still access SSH Dockers that autostart work. I tried with docker disabled before starting the gui with no change. also tried /etc/rc.d/rc.nginx-fpm restart /etc/rc.d/rc.php-fpm restart How do I access the logs needed to troubleshoot using the command line? Any help would be greatly appreciated Ive got a important VM instance I use for my job everyday on this server.

Nice! thank you. That parity drive is in use. Putting a new disk1 did the trick, was able to get that data off.

Sorry I got confused on the drive configuration. It used to have more drives that have been pulled awhile back. The Seagate ST131500341AS is the bad drive. it makes a clicking sound and isn't detected by unraid. What Im trying to do is without the array started, mount my WD Blue cache drive /dev/sdf to /mnt/sdf and cp some files off. tower-diagnostics-20211014-1348.zip

I have a test machine running unraid with 1 parity drive and 1 cache drive. My parity drive died on me. Is there any way to mount and recover the data that is on the cache drive? The data on there is replaceable but theres acouple of config files I'd rather not remake.

Im struggling to figure out how to use two NIC's in my setup. Unraid VM Server 1: Interface Eth0 1G with internet (DHCP 192.168.100.0/24) Interface Eth1 10G Direct to Unraid Storage Server 2 (Static on 192.168.200.0/24) Unraid Server 2 Interface Eth1 10G Direct to Unraid VM Server 1 (Static on 192.168.200.0/24) I need my VM from Server 1 to have internet but also able to transfer files directly to server2. I got this working with static IP using baremetal ubuntu but im lost with the unraid setting to get it all working with a VM

What could I be doing wrong or is there an issue with WD Red's and the NetApp PM80xx series cards? My start up process is, Turn on the two PSU's for the storage self wait 1 min for disks to initialize. Power on Unraid Server. My Dell SAS drives and my Seagate Sata drives show up every time. But my 6 WD Reds sometimes show up in Devices but most times they do not. Anyone seen this issue with REDs? Unraid 6.8.2 with PM80xx patch. SCSI Devices [0:0:0:0]disk Lexar USB Flash Drive 1100 /dev/sda 32.0GB [2:0:0:0]disk ATA WDC WD40EZRZ-00G 0A80 /dev/sdd 4.00TB [3:0:0:0]disk ATA Crucial_CT525MX3 R021 /dev/sdb 525GB [4:0:0:0]disk ATA ADATA SU800 8B /dev/sdc 512GB [9:0:0:0]disk TOSHIBA MG03SCA300 DG04 /dev/sde 3.00TB [9:0:1:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdf 3.00TB [9:0:2:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdg 3.00TB [9:0:3:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdh 3.00TB [9:0:4:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdi 3.00TB [9:0:5:0]disk ATA ST8000DM004-2CX1 0001 /dev/sdj 8.00TB [9:0:6:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdk 3.00TB [9:0:7:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdl 3.00TB [9:0:8:0]disk ATA ST8000DM004-2CX1 0001 /dev/sdm 8.00TB [9:0:9:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdn 3.00TB [9:0:10:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdo 3.00TB [9:0:11:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdp 3.00TB [9:0:12:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdq 3.00TB [9:0:13:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdr 3.00TB

I have this same netapp setup and the pcie card shows up with unraid 6.8.3 but only my SAS Dell / Toshiba Drives are being detected. My WD Red Sata drives I get nothing. SCSI Devices [0:0:0:0]disk Verbatim STORE N GO PMAP /dev/sda 15.4GB [2:0:10:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdb 3.00TB [2:0:12:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdc 3.00TB [2:0:13:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdd 3.00TB [2:0:14:0]disk TOSHIBA MG03SCA300 DG04 /dev/sde 3.00TB [2:0:16:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdf 3.00TB [2:0:17:0]disk TOSHIBA MG03SCA300 DG04 /dev/sdg 3.00TB

Hi did you manage to find a fix? Im having the same issue on very similar hardware. x570 and RX580

Tried the static dns with 1.1.1.1 and 1.0.0.1 No change

actually to clarify, not on the internet isnt completely correct. The unraid console cannot connect outside through ping or other apps like community apps. But my nextcloud docker is working 100% accessible from the internet using my domain name

how do I change the gateway. Isnt it already defined under route for 192.168.100.1 via br0 I havnt made any progress getting the box back onto the internet.

I dont want to start fresh but If I decide to, if I backup the unraid license file, wipe and reinstall the USB stick along with the old license file. Does that work for a fresh start without having to contact support for a new license?

I deleted the network.cfg Booted up with only eth0 plugged in, at this point its all I really care about. I was able to get a address from my router's DHCP but no internet. all the internal networking seems to work, like accessing plex from the IP. but nothing with the internet works. Like opening CA or Ping outside like yahoo.com doesn't resolve anything I tried different static DNS addresses, no change tower-diagnostics-20200103-1635.zip