MWDK

Members
  • Posts

    21
  • Joined

  • Last visited

Everything posted by MWDK

  1. So it started up fine. I can browse the files.. Can i start a check now to see if everything is as it shuold be somehow? i have a huge lost-found folder now with lots of files in why?
  2. Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... ERROR: The filesystem has valuable metadata changes in a log which needs to be replayed. Mount the filesystem to replay the log, and unmount it before re-running xfs_repair. If you are unable to mount the filesystem, then use the -L option to destroy the log and attempt a repair. Note that destroying the log may cause corruption -- please attempt a mount of the filesystem before doing this.
  3. any special way to run xfs_repair for best results?
  4. it has just been rebuilt without error, so i asume it wouldnt do any good. can someone explain why the parity disc can't "fix" this? i mean if the disc goes bad i had the idea that the parity would have a "backup" and if a new disc was inserted, everything would be fine again?
  5. Yes to several open browsers. Attached is the output... i would recommend changing how it shows this output as it crashes my browser because of the size. Would be much better to generate a file like the diag Had to save the site html and take info from there gnubbi_Device.txt
  6. no. i have my parity disc, that i suppose have "my backup" of files! Before and after diag attached gnubbi-diagnostics-20200216-1602.zip gnubbi-diagnostics-20200214-1601.zip
  7. So i had a SATA cable fail somehow that ended up in an array disc being disabled. I followed the guide to re-enable the disc with stopping the array, removing the disc from the array. starting. stopping, enabling the disc for array and making it rebuilt again. Works fine - BUT it now says that my disc have no file system and also want to format the drive (after the rebuilt has finished without errors...) Is this correct to format it? Has it automatically moved the files that were ON the disc to the other discs in the array? I hope im not losing files
  8. i need gpu encoding aswell isn't there an option to update it somehow and keep the nvidia options?
  9. yeah im running the nvidia version to transcode with GPU Will i be able to do that with the jlesage version also ?
  10. Is it possible to upgrade the Handbrake Docker manually? I have the error that transcodes all files in a dir, even though i have specified jpg, nfo and so on as files it shouldnt touch There are no updates on my docker page, so i need to do i manually via cli i guess? Unraid machine
  11. So i have a nice HP Xeon workstation with Unraid 6.8. I have the following drives - but whats the BEST way to configure them? 2 x 8TB S6 1 x 5TB S6 1 x 3TB S6 1 x 1TB S6 SSD 1 x 512GB S6 SSD 1 x 512GB PCIe NVME SSD 1 x 256GB M.2 SSD 4 x 240GB S6 SSD Would it make sense to buy a large parity disc aswell to boost storage space? Like a 10 or 12TB disc? The IDEA was to use the 512GB NVME as very fast cache - but i don't know how that works with all the other SSD's. Would be nice to have the 4 x 240TB in RAID5 as cache aswell 32gig ram aswell btw.. What are your thoughts? Any info is much appreciated! EDIT: Also GTX1050ti for transcoding plex and that works extremely well! It's used mostly for document storage and PLEX
  12. So basically a 3 or 4 disc RAID5 cache tells you some wrong numbers but it works 100% correctly? I am about to install 4 x 240gb ssd's as cache - or atleast that was the thought I have 1 x 512GB PCIe NVME as cache right now and 1 x 256GB M.2 unassigned that im not sure how to use best way
  13. it's running again because i tried to change the cache. Was the exact same when the parity sync was done earlier, so thats not the issue im afraid
  14. Brand new HP Xeon CPU // 32GB RAM Western Digital USB3.1 external harddrive with 2x8TB discs in raid0 (seen as one disc) NTFS 8TB brand new parity 8TB brand new Array disc1 Samsung 1TB SSD Array disc2 Samsung 512GB SSD Array disc3 Samsung 512GB NVME cache all running xfs when i transfer from USB via Krusader docker i get 5-15MB/sec which is extremely slow! what can i do to speed up the transfer? its writing directly to array as im transferring 7TB and it fails if i transfer to Cache first. Anyone? Thanks! diagnostics-20191230-1619.zip
  15. Thank you sir! will try it out I see you have the Norcotek case i want! Happy with it?
  16. For some reason it worked after i uninstalled and installed again So it's mounted! Not i just need to find the best file explorer so i can copy the content to my Unraid drives
  17. So - anyone can help me with an USB device fail? Dec 28 19:10:02 Hubbi unassigned.devices: Adding disk '/dev/sda1'... Dec 28 19:10:02 Hubbi unassigned.devices: Mount drive command: /sbin/mount -t ntfs -o auto,async,noatime,nodiratime,nodev,nosuid,umask=000 '/dev/sda1' '/mnt/disks/My_Book_Duo' Dec 28 19:10:02 Hubbi unassigned.devices: Mount of '/dev/sda1' failed. Error message: Dec 28 19:10:02 Hubbi unassigned.devices: Partition 'My_Book_Duo' could not be mounted. 16B Western Digital USB3 drive i have alot of data on i need to transfer to my Unraid server