Preclear reported an error, no error?

[gep]

Did a defaults preclear of a new drive, with pre and post reads on. When I came back to it the status show 'An error occured check the log' but I can't see anything wrong here.  Ideas? Am I missing something? Ok to still put in array?

 

Dec 30 16:29:35 ur kernel: sd 7:0:0:0: [sde] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
Dec 30 16:29:35 ur kernel: sd 7:0:0:0: [sde] 4096-byte physical blocks
Dec 30 16:29:35 ur kernel: sd 7:0:0:0: [sde] Write Protect is off
Dec 30 16:29:35 ur kernel: sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
Dec 30 16:29:35 ur kernel: sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 30 16:29:35 ur kernel: sd 7:0:0:0: [sde] Attached SCSI disk
Dec 30 16:29:43 ur emhttpd: WDC_W (sde) 512 7814037168
Dec 30 16:33:16 ur preclear_disk_WD-W[12024]: Command: /usr/local/emhttp/plugins/preclear.disk/script/preclear_disk.sh --cycles 1 --no-prompt /dev/sde
Dec 30 16:33:18 ur preclear_disk_WD-W[12024]: Pre-Read: dd if=/dev/sde of=/dev/null bs=2097152 skip=0 count=4000787030016 conv=notrunc,noerror iflag=nocache,count_bytes,skip_bytes
Dec 31 00:37:47 ur preclear_disk_WD-W[12024]: Zeroing: dd if=/dev/zero of=/dev/sde bs=2097152 seek=2097152 count=4000784932864 conv=notrunc iflag=count_bytes,nocache,fullblock oflag=seek_bytes

 

Edited December 31, 2020 by gep

[ChatNoir]

You should ask that question in the preclear plugin support topic: 

 

[gep]

Thanks, my apologies