Juise99 Posted January 23, 2021 Share Posted January 23, 2021 Initial transfer starts at about 4gb and immediately tanks. I know there's an amount of RAM caching, and HW Buffering that happens in windows and the hardware for a file transfer. However the transfer should balance out at the continuous write speed of the cache drive (Samsung 840 Pro), or continuous read speed of the source (PERC H700 RAID 5) whichever is lower. The hardware should easily do a sustained 2.5gb transfer and as you can see that's not happening. Quote Link to comment
JorgeB Posted January 24, 2021 Share Posted January 24, 2021 The way it drops looks like a device problem, if you enable turbo write and transfer directly to the array is it the same or better? Quote Link to comment
Juise99 Posted January 27, 2021 Author Share Posted January 27, 2021 (edited) On 1/24/2021 at 3:31 AM, JorgeB said: The way it drops looks like a device problem, if you enable turbo write and transfer directly to the array is it the same or better? Turbo write is enabled, similar results when writing directly to the array (just a much lower initial burst). Devices also test fine too. Top chart are the mechanical drives, bottom is the cache SSD. Edited January 27, 2021 by Juise99 Quote Link to comment
JorgeB Posted January 27, 2021 Share Posted January 27, 2021 Start a transfer to the array with turbo write enable and grab the diagnostics after the transfer slows down. Quote Link to comment
Juise99 Posted January 27, 2021 Author Share Posted January 27, 2021 12 hours ago, JorgeB said: Start a transfer to the array with turbo write enable and grab the diagnostics after the transfer slows down. syslog or something else? Quote Link to comment
itimpi Posted January 27, 2021 Share Posted January 27, 2021 6 minutes ago, Juise99 said: syslog or something else? Diagnostics (Tools -> Diagnostics) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.