alphablu Posted January 29, 2021 Share Posted January 29, 2021 (edited) Hi all, I am using a netapp DS4246 with Unraid and I recently acquired interposers so that I can make use of some SAS drives I have access to. I went about adding the interposers to the existing drives today until I noticed that they are subtly changing the drive model names and as a result Unraid doesn't recognize them anymore. I reversed course and did some reading and it looks like the procedure is to add the drives to their correct slots and then run the New Config utility? Is that correct? And is there anything else I should know so that I dont mess this up 😅 Edited January 30, 2021 by alphablu Quote Link to comment
JorgeB Posted January 30, 2021 Share Posted January 30, 2021 9 hours ago, alphablu said: looks like the procedure is to add the drives to their correct slots and then run the New Config utility? Is that correct? Yes. 9 hours ago, alphablu said: And is there anything else I should know so that I dont mess this up 😅 If the drives are unmountable after that don't format and post diags. Quote Link to comment
alphablu Posted January 30, 2021 Author Share Posted January 30, 2021 Ok, I went ahead with it and everything went smoothly. I'm back up and running. Thanks! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.